PURPOSES : This study aims to understand the characteristics of accidents involving autonomous vehicles and derive the causes of accidents from road spatial information through autonomous vehicle accident reports. METHODS : For this study, autonomous vehicle accident reports collected and managed by the CA DMV were used as data sources. In addition, spatial characteristics and geometric data for accident locations were extracted by Google maps. Based on the collected data, the study conducted general statistics, text embedding, and cross-analysis to understand the overall characteristics of autonomous vehicle accidents and their relationship with road spatial features. RESULTS : The analysis results for characteristics of autonomous vehicle accidents, applying statistical analysis and text embedding techniques, reveal that the damages caused by autonomous vehicle accidents are often minor, and approximately half of the accidents are triggered by other vehicles. It is noteworthy that accidents where autonomous vehicles are at fault are not uncommon, and when the cause of the accident is within the autonomous vehicle, the accident risk can increase. The accident analysis results using spatial data showed that the severity of accidents increases when on-street parking is present, when dedicated lanes for bicycles and buses exist, and when bus stops are present. CONCLUSIONS : Through this study, geometric and spatial elements that appear to have an impact on autonomous driving systems have been identified. The findings of this study are expected to serve as foundational data for improving the safety of autonomous vehicle operations in the future.
PURPOSES : Derive a road pavement design method using Geocells, aim to derive a road pavement design and construction method suitable for the characteristics of the Bangladesh region METHODS : To assess long-term performance during road construction in Southeast Asia using Geocells, field tests and numerical analysis are conducted to verify stability. RESULTS : A total of 12 displacement measurements were conducted during the field tests, confirming an average load of 15.75 kN and an average displacement of 0.542mm. Inverse analysis was performed to obtain the properties of Geocell combined with compacted soil. The numerical analysis results confirmed that the insertion of Geocell provides better stability compared to the case with only compacted soil. CONCLUSIONS : Based on field tests and numerical analysis, a road design plan suitable for the Southeast Asian environment was proposed. A preliminary test section was selected in the Comilla region of Bangladesh, and test construction has been completed. Subsequent evaluations of the structural performance by soil layer in the test construction area will be conducted to develop a Geocell road pavement method, taking into consideration the characteristics of the Bangladesh region.
최근 여러 연구에서 Hg2+에 선택적으로 반응해 형광을 강화시키거나 소광시키는 thiophene을 기반으로한 probe가 많이 개발되어 왔지만, 이에 따른 분광학적 현상에 대한 정확한 분자적 수준의 이론적 해석이 이루어지지 않 았다. 이에 따라 우리는 Hg2+와 thiophene간 상호작용을 면밀히 분석하기 위해 Hg2+와 thiophene간 거리에 따른 에너 지 포텐셜을 구하였다. Hg2+ 이온에 대한 모든 전자(all electron, AE) basis set인 x2c-TZVPPall와 effective core potential (ECP) 기반인 LANL2DZ는 모두 상대성 효과가 고려된 바닥 상태에서 Hg2+와 thiophene이 결합력이 없이 해 리가 되는 에너지 포텐셜을 보여주었지만, 용매인 물이 고려된 시스템에서는 Hg2+와 thiophene이 결합력을 가지는 것 을 보였으며 이것은 실험적인 결과를 잘 재현하는 것이었다. 따라서 Hg2+ 이온을 포함하는 착화합물 시스템에서 올바 른 에너지 상태를 구하기 위해서는 상대성효과와 더불어 solvent 영향도 잘 고려돼야 함을 알 수 있다.
최근 노인 인구가 증가함에 따라, 이들의 삶의 질에 대한 사회적 관심도가 높아지고 있으며, 노인들의 건강하고 활기찬 노후를 고려하는 활동적 노후 및 고령친화도시의 개념이 주목받고 있다. 이러한 상황에서 많은 지자체는 노인들이 지역 사회에서 여생을 의미 있게 보낼 수 있도록 다양한 노인여가복지 서비스를 제공하기 위해 노력하고 있다. 그러나 실질적인 노인 수요에 부합하는 서비스 공급이 이루어지지 못하고 있으며, 지역별로 노인여가복지 서비스의 공간적 격차가 발생하고 있는 실정이다. 이는 노인여가복지 입지와 관련하여 체계적인 법적 기준이 부재하기 때문이다. 이에 본 연구는 서울시의 노인여가복지 시설에 대한 수요와 공급의 공간적 불일치성을 탐색하고, 공간 효율성과 형평성을 고려한 노인복지센터의 최적 입지 대안을 제시하고 있다. 연구 결과, 여러 입지 시나리오에 따라 서울시 노인복지센터의 공간적 접근성을 향상시킬 수 있는 다양한 최적 입지 대안들을 제시할 수 있었으며, 향후 노인복지 서비스 공급과 관련한 계획 및 정책에 있어 중요한 기초 자료로 활용될 수 있을 것으로 기대된다
In supply chain, most partners except the top level suppliers have inbound and outbound logistics. For example, toll manufacturing companies get unprocessed materials from a requesting company and send the processed materials back to the company after toll processing. Accordingly, those companies have inbound and outbound transportation costs in their total logistics costs. For many cases, the company may make the schedule of distributions by considering only the due delivery dates. However, the inbound and outbound transportation costs could significantly affect the total logistics costs. Thus, this paper considers the inbound and outbound transportation costs to find the optimal distribution plans. In addition, we have considered the inventory holding costs as well with transportation costs. From the experimental results, we have provided the optimal strategies for the distributions of replenishment as well as deliveries.
This study aims to assess the seismic performance of retrofitted reinforced concrete columns using a Replaceable Steel Brace (RSB) system, subjected to combined axial, lateral, and torsional loadings. Through experimental testing, one non-retrofitted concrete column specimen and two retrofitted specimens with variable sliding slot lengths were subjected to eccentric lateral loads to simulate realistic seismic loading. The retrofitted specimens with RSBs exhibited enhanced resistance against shear cracking, effective torsional resistance, and demonstrated the feasibility of easy replacement. The RSB system substantially improved seismic performance, achieving approximately 1.7 times higher load capacity and 3.5 times greater energy dissipation compared to non-retrofitted column, thus validating its efficacy under combined loading conditions.
Non-structural elements, such as equipment, are typically affixed to a building’s floor or ceiling and move in tandem with the structure during an earthquake. Seismic forces acting upon non-structural elements traverse the ground and the building’s structure. Considering this seismic load transmission mechanism, it becomes imperative to account for the interactions between soil, structure, and equipment, establishing seismic design procedures accordingly. In this study, a Soil-Structure-Equipment Interaction (SSEI) model is developed. Through seismic response analysis using this model, how the presence or absence of SSEI impacts equipment behavior is examined. Neglecting the SSEI aspect when assessing equipment responses results in an overly conservative evaluation of its seismic response. This emphasizes the necessity of proposing an analytical model and design methodology that adequately incorporate the interaction effect. Doing so enables the calculation of rational seismic forces and facilitates the seismic design of non-structural elements.
This study analyzes the seismic response of traffic light poles, considering soil-foundation effects through nonlinear static and time history analyses. Two poles are investigated, uni-directional and bi-directional, each with 9 m mast arms. Finite element models incorporate the poles, soil, and concrete foundations for analysis. Results show that the initial stiffness of the traffic light poles decreases by approximately 38% due to soil effects, and the drift ratio at which their nonlinear behavior occurs is 77% of scenarios without considering soil effects. The maximum acceleration response increases by about 82% for uni-directional poles and 73% for bi-directional poles, while displacement response increases by approximately 10% for uni-directional and 16% for bi-directional poles when considering soil-foundation effects. Additionally, increasing ground motion intensity reduces soil restraints, making significant rotational displacement the dominant response mechanism over flexural displacement for the traffic light poles. These findings underscore the importance of considering soil-foundation interactions in analyzing the seismic behavior of traffic light poles and provide valuable insights to enhance their seismic resilience and safety.
PURPOSES : Recently, corrosion and deterioration of highway facilities have been increasing owing to the excessive use of deicers. This study aimed to find an optimal snow removal method to develop countermeasures for the problem of excessive deicer use and improve the efficiency of snow removal. METHODS : Theoretical investigations and experiments related to deicing were conducted to determine the differences between deicing chemical types and states. Based on regional weather patterns, the entire country was categorized into four groups: warm and heavy snow, warm and light snow, cold and heavy snow, and cold and light snow, and matched with each regional office of the Korea Expressway Corporation. RESULTS : Optimal snow removal methods were proposed considering regional characteristics and deicing chemical types and states. CONCLUSIONS : Different deicer types were proposed according to the region type, such as using only salt and salt/calcium chloride in the warm and cold regions, respectively. Second, plowing was more effective at lower temperatures. Third, liquid deicer spraying could reduce the amount of deicer used. A liquid deicer is suitable for preliminary spraying because its quick-acting properties are superior to those of a solid deicer, although its lasting properties are inferior to those of the solid deicer.
최근 발생되는 재난의 추이를 살펴보면 기후변화에 따른 자연재해 발생빈도가 증가하고 있으며, 이에 따른 피해 규모 추세가 대형화로 변화되고 있다. 대규모로 진행되고 있는 도시화와 고도의 산업화로 인해 도시개발 지역의 확대와 중첩 영향으로 대형 자연 재난이 발생하여 도시시설물에 직접적인 손실이 발생하고 있다. 옥외광고물의 무분별한 설치로 도시의 미관훼손은 몰론 강풍으로 인 한 파손 및 추락 등의 사고가 빈번히 발생하는 실정이다. 이러한 피해는 강풍에 취약한 옥외광고물의 내풍설계 기준의 미비가 가장 큰 요인으로 인식되는데 풍하중 반영한 옥외광고물 설치는 전문지식이 필요한 분야로 중소규모의 옥외광고사업자가 대부분인 국내 현실 과는 괴리가 발생하고 있다. 따라서 본 연구에서는 전국에서 이용할 수 있는 풍하중을 안전성 관점에서 산정하였고, 이를 바탕으로 옥 외광고물 설치 고정자재 수 등을 산정할 수 있는 내풍표준 가이드라인을 제시하였다.
An elastic bearing must be strong against vertical loads and flexible against horizontal loads. However, due to the material characteristics of rubber, it may show variability due to the manufacturing process and environmental factors. If the value applied in the bridge design stage and the actual measured value have different values or if the performance during operation changes, the performance required in the design stage may not be achieved. In this paper, the seismic response of bridges was compared and analyzed by assuming a case where quality deviation occurs during construction compared to the design value for elastic bearings, which have not only always served as traditional bearings but also have had many applications in recent seismic reinforcement. The bearing's vertical stiffness and shear stiffness deviation were considered separately for the quality deviation. In order to investigate the seismic response, a time history analysis was performed using artificial seismic waves. The results confirmed that the change in the bearing's shear stiffness affects the natural period and response of the structure.
In this study, considering the expansion/contraction behavior of the upper structure at all times and the abnormal behavior of the receiving friction elements that allow horizontal movement during earthquakes, a port receiving test body simulating the protrusion of the friction elements was created and the modulus performance was evaluated. In order to confirm the influence of the friction element's projection, the friction element's degree of separation was divided into four stages, and the shear behavior of the test specimen and the friction coefficient were confirmed. As a result of the experiment, it was found that the friction load increases as the protrusion degree of the friction element increases. On the other hand, as the degree of protrusion of the coefficient of friction increases, the coefficient of friction also increases. It was confirmed that damage to the friction elements during use increases the coefficient of friction, hinders smooth expansion and contraction of the upper structure, and causes stress concentration at the fixed-end support.
Numerous studies have attempted to predict the energy output of solar-powered vehicles based on different parameters such as road conditions, driver characteristics, and weather. However, since these studies were conducted on stationary vehicles, they are limited in their accuracy when applied to driving vehicles. This study aimed to improve the accuracy of electric power prediction for a solar-powered bus by applying a technique that improves energy efficiency without affecting driving performance. A comparative analysis of power generation and solar irradiance data was conducted for the bus driven on different roads to forecast its power generation, and a high-accuracy power generation prediction equation was derived. A comparison with actual test results revealed that a power generation forecast accuracy of at least 90% was achieved, validating the equation used for forecasting. With this power generation prediction process, it is possible to forecast the amount of energy generated in advance when a solar bus is operated in a specific area.