This study describes the effects of palm oil biodiesel (PD) blended with diesel on the combustion performance, emission characteristics and soot morphology in a 4-cylinder CRDI diesel engine. 5 kinds of fuels are used with blending as diesel/biodiesel volume ratio 0%, 10%, 20%, 30%, 100%. The engine is operated under idle speed, 750rpm and load conditions of the engine are 0 Nm and 40Nm. The Coefficient of Variation(COV) of Indicated Mean Effective Pressure(IMEP) shows that the engine operates very steadily in the idle state. But fuel consumption is increased. And Emission results show that the oxygen in biodiesel has a great influence on the production of exhaust emissions. The nitrogen oxides(NOx) is decreased because of high viscosity and low heating values of biodiesel at low blend ratio. But NOx and Carbon monoxide(CO) are increased above a certain blend ratio. Particulate matter(PM) and Hydrocarbons(HC) is decreased according to increase of blend ratio. The size of soot is decreased and the morphology of soot is developed to cluster with increasing blend ratio.

In recent years, much interest has been devoted to bio-fuels because of their beneficial effects on environment, agriculture and economic development. Raw vegetable oil – a kind of bio-fuels, still exits many downsides, is potential renewable fuel replaced for ever-exhausted fossil fuel. In this report, vegetable oil which is available in the South of Vietnam such as raw coconut oil is studied by heating up different temperature with the aim at decreasing its high viscosity and density and meeting the fuel requirements. The experiments are conducted on heated coconut oil (HCO) and fossil diesel oil (DO) using an 80hp of small marine diesel engine. The results of engine performance as using DO and HCO included engine power (Ne), specific fuel consumption (SFC), thermal efficiency (TE), emission characteristics such as carbon monoxide (CO), unburned hydrocarbon (HC), smoke, nitrogen oxides (NOx) at internal feature are measured. The experiment results show higher SFC, CO, HC and smoke emissions, and lower TE, and NOx emissions for HCO with respect to DO. In addition, this study also reveals that, 1000C of HCO is said to be the most suitable heating temperature as getting the engine performance equals to DO.

Our environment is faced with serious problems related to the air pollution from automobiles in these days. In particular, the exhaust emissions of diesel engines are recognized as main causes of the air pollution. CRDI (common rail direct injection) diesel engine is widely used for the sake of minimization on exhaust emission. Because biodiesel fuel is a renewable and alternative fuel for diesel engine, its usability is expanded. An commercial CRDI diesel engine used to commercial vehicle was fueled with diesel fuel and 5% biodiesel blended fuel (BDF 5%) with city mode in excess of 300 hours. The engine performance and exhaust emissions were sampled at 1 hour interval for analysis. To check the engine parts (valve, injector), the engine was inspected after test. It was concluded that there was no unusual deterioration of the engine, or any unusual changes in engine power and exhaust emissions in spite of operation of 300 hours with BDF 5%.

In this study, the potential of biodiesel fuel and oxygenated fuel (ethylene glycol mono-n-butyl ether; EGBE) was investigated as an effective method of decreasing the smoke emission. The smoke emission of blending fuel (EGBE 0~20 vol-%) was reduced in comparison with diesel fuel and it was reduced approximately 64% at 2000 rpm, full load in the 20% of blending rate. But torque and brake specific energy consumption (BSEC) didn't have large differences. Also, the effects of exhaust gas recirculation (EGR) on the characteristics of NOx emission has been investigated. Consequently, it was found that simultaneous reduction of smoke and NOx was achieved with biodiesel fuel and oxygenated fuel(10%) and cooled EGR rates (5~10%) in a DI diesel engine.

The diesel engine is excellent in economic and thermal efficiency, and is widely used as a power source for industries and automobiles. However, the problem of environmental pollution caused by exhaust gas has recently become serious and the development of alternative energy resources is urgently required due to depletion of fossil fuel. Because biodiesel is similar in properties to light oil, it is being used as fuel for diesel engines by replacing or mixing conventional light oil. As the blending of biodiesel fuel in diesel increases, the emission of harmful substances is decreased as compared with the general diesel fuel, and the supply is increasing. In this study, the effects of biodiesel fuel on engine power and exhaust gas were investigated, and empirical formulas for various NOx and Smoke exhaust gases were derived based on biodiesel blending fuel.

In this study, the possibility of biodiesel fuel and oxygenated fuel(dimethoxy methane, DMM) was investigated as an alternative fuel for a naturally aspirated direct injection diesel engine. The smoke emission of blending fuel (diesel fuel 90vol-% + DMM 10vol-%) was reduced approximately 70% at 2500rpm, full load in comparison with the diesel fuel. Engine power and brake specific energy consumption showed no significant differences. But, NOx emission of biodiesel fuel and DMM blended fuel increased compared with commercial diesel fuel due to the oxygen component in the fuel. It was needed a NOx reduction counter plan that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with diesel fuel (95 vol-%) and DMM (5 vol-%) blended fuel and cooled EGR method (15%).

This research aims to analyze the potential possibility of the butyl ether (BE, oxygenates of di-ether group) as a fuel additives for a naturally aspirated direct injection diesel engine fuel. Compared with the diesel fuel, smoke emission decreased approximately 26% by applying the blended fuel(diesel fuel 80 vol-% + BE 20vol-%) at the engine speed of 2,500 rpm and with full engine load. There was none significant difference between the blended fuel and the diesel fuel on the power, torque, and brake specific energy consumption rate of the diesel engine. But, NOx emission from the blended fuel was higher than that of the commercial diesel fuel. As a counter plan, the EGR method was employed to reduce the NOx. We found the possible area where the simultaneous reduction of the smoke and the NOx emission from the diesel engine was achieved by applying the BE blended fuel and the cooled EGR method.

전통적인 화석 에너지 자원의 고갈과 환경오염 악화 등의 관점에서 볼 때 에너지 절약 및 배출가스의 저감은 동시에 해결해야 되는 문제로 대두되고 있다. 바이오연료는 대체연료의 하나로서 이러한 문제들을 효과적으로 해소할 수 있는 대안으로 떠오르고 있다. 따라서 본 연구에서는 커먼레일 터보과급디젤기관에서 카놀라유 바이오디젤연료의 적용효과를 알아보기 위하여 실험적으로 고찰하였다. 실험에 사용된 연료는 ULSD(초저황 디젤유), BD20(체적비로 20%인 카놀라유와 80% 디젤유 혼합) 및 PCO(순수한 카놀라유)를 사용하였다. 카놀라유 바이오디젤연료의 혼합율이 증가함에 따라 입자상물질(PM)과 일산화탄소 (CO)는 크게 감소하였으며, 질소산화물(NOx)은 약간 증가하는 현상을 보였다.

In this study, the possibility of biodiesel fuel and oxygenated fuel(dimethoxy methane, DMM) was investigated as an alternative fuel for a naturally aspirated direct injection diesel engine. The smoke emission of blending fuel (diesel fuel 90vol-% + DMM 10vol-%) was reduced approximately 70% at 2500rpm, full load in comparison with the diesel fuel. But, engine power and brake specific energy consumption showed no significant differences. But, NOx emission of biodiesel fuel and DMM blended fuel increased compared with commercial diesel fuel due to the oxygen component in the fuel. It was needed a NOx reduction counter plan that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with diesel fuel (95 vol-%) and DMM (5 vol-%) blended fuel and cooled EGR method (15%).

Biodiesel fuel (BDF) can be effectively used as an alternative fuel in diesel engines. The BDF, however, may affect performance and exhaust emissions of the diesel engine because it's physical and chemical properties are different with from the diesel fuel such as viscosity, compressibility and so on. To investigate an effect of injection timing on characteristics of performance and exhaust emissions with the BDF in an IDI diesel engine, this research applied the BDF derived from soybean oil in this study. The engine was operated with six different injection timings from TDC to BTDC 12 ˚CA and six different loads at the engine speed of 1500 and 2000 rpm. In less then the BDF 20, it showed the similar trend compare to the diesel fuel. But, the best injection timing was 2˚CA retarded compare to the diesel fuel with BDF 50.

The performance of organic Rankine cycle was numerically investigated to recover heat from the exhaust of a heavy-duty diesel engine. Exhaust flow rates and temperatures are obtained from the simulation of diesel cycle by using GT-Power. The net power outputs of organic Rankine cycle for 9 working fluids were calculated by cycle simulations. The results showed that as for the net power outputs and the pressure of working fluids, R21 and R245fa are suitable as working fluids for ORC in diesel engine.

Biodiesel as alternative energy source of the traditional petroleum fuels has increased interest, because environmental pollution based exhaust emissions from vehicle became serious. The advantage of biodiesel produced from esterification of vegetable and animal oils can be used without the modification of existing diesel engine, but glycerin is generated by production process. In this study, the usability of non-esterification biodiesel as an alternative fuel was investigated in a indirect injection diesel engine. The non-esterification biodiesel has not generated glycerin in esterification process and reduced the 20 percent of cost because it has not used methanol in the production process. Experiments were conducted by using the 5, 10 and 20 percentage of biodiesel and 4 and 8 percentage of biodiesel with 1 and 2 percentage of WDP in baseline diesel fuel. The smoke emission of biodiesel was reduced in comparison with diesel fuel, but power, torque and brake specific energy consumption was similar to diesel fuel.

Biodiesel as alternative energy source of the traditional petroleum fuels has increased interest, because environmental pollution based exhaust emissions from vehicle became serious. The advantage of biodiesel produced from esterification of vegetable and animal oils can be used without the modification of existing diesel engine, but glycerin is generated by production process. In this study, the usability of non-esterification biodiesel as an alternative fuel was investigated in a indirect injection diesel engine. The non-esterification biodiesel has not generated glycerin in esterification process and reduced the 20 percent of cost because it has not used methanol in the production process. Experiments were conducted by using the 5, 10 and 20 percentage of biodiesel and 4 and 8 percentage of biodiesel with 1 and 2 percentage of WDP in baseline diesel fuel. The smoke emission of biodiesel was reduced in comparison with diesel fuel, but power, torque and brake specific energy consumption was similar to diesel fuel.

Our environment is faced with serious problems related to the air pollution from automobiles in these days. In particular, the exhaust emissions from the diesel engines are recognized main cause which influenced environment strong. In this study, the potential of biodiesel fuel and oxygenated fuel (ethylene glycol mono-n-butyl ether; EGBE) was investigated as an effective method of decreasing the smoke emission. The smoke emission of blending fuel (EGBE 0~20 vol-%) was reduced in comparison with diesel fuel and it was reduced approximately 64% at 2000 rpm, full load in the 20% of blending rate. But torque and brake specific energy consumption (BSEC) didn't have no large differences. But, NOx emissions from biodiesel fuel and EGBE blended fuel were increased compared with diesel fuel.

Diesel engines show better thermal efficiency and fuel consumption, but diesel engines typically generate more NOx emissions because of lean-burn conditions. Therefore, it is necessary to reduce the emissions of diesel engines either by efficiently controlling combustion or by employing exhaust gas after-treatment systems. In this study several problems we're observed in a SCR system and Engine control system. The analysis result, new technology SCR is suitable for the vehicle with low temperature operating condition. Through this analysis we can find out more effective repair factors from the various fault in SCR component.