Various linear system solvers with multi-physics analysis schemes are compared focusing on the near-field region considering thermal-hydraulic-chemical (THC) coupled multi-physics phenomena. APro, developed at KAERI for total system performance assessment (TSPA), performs a finite element analysis with COMSOL, for which the various combinations of linear system solvers and multi-physics analysis schemes should to be compared. The KBS-3 type disposal system proposed by Sweden is set as the target system and the near-field region, which accounts for most of the computational burden is considered. For comparison of numerical analysis methods, the computing time and memory requirement are the main concerns and thus the simulation time is set up to one year. With a single deposition hole problem, PARDISO and GMRESSSOR are selected as representative direct and iterative solvers respectively. The performance of representative linear system solvers is then examined through a problem with an increasing number of deposition holes and the GMRES-SSOR solver with a segregated scheme shows the best performance with respect to the computing time and memory requirement. The results of the comparative analysis are expected to provide a good guideline to choose better numerical analysis methods for TSPA.

Guided missiles are a one-shot system that finishes their purpose after being used once, and due to the long-term storage until launch, the storage reliability is calculated during development, and performance is maintained through periodic inspections until the life cycle arrives. However, the reliability standards applied in the development of guided missiles were established by analyzing data accumulated by the United States during long-term operation in the country, and since they are different from our environment, the 00 guided missiles that have been deployed in the armed forces for more than 10 years under the premise that there is a difference from actual reliability. As a result of verifying the appropriateness of the current inspection cycle by analyzing the actual reliability of the missile, the necessity of changing the inspection period was derived because it was higher than the predicted reliability. It is proposed to build and utilize a lifespan management system that can systematically collect all data such as shooting and maintenance results by classification, and to establish a reliable reliability standard based on the accumulated data.

Structural vibration induced by earthquake hazards is one of the most significant concerns in structure performance-based design. Structural hazards evoked from seismic events must be properly identified to make buildings resilient enough to withstand extreme earthquake loadings. To investigate the effects of combined earthquake-resistant systems, shear walls and five types of dampers are incorporated in nineteen structural models by altering their arrangements. All the building models were developed as per ACI 318-14 and ASCE 7-16. Seismic fragility curves were developed from the incremental dynamic analyses (IDA) performed by using seven sets of ground motions, and eventually, by following FEMA P695 provisions, the collapse margin ratio (CMR) was computed from the collapse curves. It is evident from the results that the seismic performance of the proposed combined shear wall-damper system is significantly better than the models equipped with shear walls only. The scrutinized dual seismic resisting system is expected to be applied practically to ensure a multi-level shield for tall structures in high seismic risk zones.

Numerical analysis has been carried out to predict the thermal characteristics for a LED lens in mold core system. These thermal characteristics inside the lens are largely affected by geometry, material, and initial conditions of the mold core and lens system. Local temperature and heat flux variation inside the lens are compared for several initial temperatures. Maximum temperature inside the lens was decreased rapidly from the beginning of cooling process up to about 10 seconds. There was also large variation of the heat flux at the upper and lower surfaces of the lens with initial temperature distribution. And the heat flux from the thin lower surface of the lens was relatively higher than the opposite-side thick region. In addition, overall heat transfer rate from the lens through the mold core has similar transient distribution from the beginning. These results can be applied as basic heat transfer data for the LED lens design and manufacturing process in the mold core system.

The paint removal of fighter jets is just as important as the painting, because perfect paint removal ensures the quality of the exterior painting on the aircraft. However, the current conditions for paint removal work of the ROKAF’s are poor. It is identified that the painting process currently implemented by the ROKAF is not only exposed to harmful compounds such as harmful dust and hexavalent chromium, but also consumes a lot of water. Thus, the introduction of advanced facility is considered. This study compares the fighter jets painting removal process currently applied by the Korean Air Force with the improved laser coating removal process of the US Air Force, and conducts an incremental analysis to perform economic analysis for the introduction of advanced facility. Four scenarios were envisioned on the premise of an increase in the number of fighters in the future, incremental analysis shows that laser coating removal method is advantageous in all scenarios. In addition, it is recommended that paint removal cycle keeps the current 12-year and the outsourcing amount to civilian depot is reduced.

Recently, the construction of tall buildings utilized by high strength-concrete in the whole world is tending to be on the rise. The application of high-rise structural system in buildings results in the excellent cut-down effect in construction materials due to section reduction. Therefore, in order to investigate the CO2 and resource reduction effect for the high-rise structural system, comparisons of GWP and ADP in embodied energy of structural materlais between 4 type of high-rise structural system have been performed. As a result, GWP emission increased in the order of steel structure outrigger system, RC shear wall system, and RC outrigger system. On the other hand, ADP emissions increased in the order of RC shear wall system, RC outrigger system, and steel structure outrigger system.

The purpose of this study is to develop a pH measurement system capable of measuring the acidity of saliva to check the change in pH level in saliva during driving and to detect whether fatigue is affected. When the pH level is checked at rest and operation, and oxygen concentration is supplied additionally, it will be verified whether the fatigue is reduced. It is reported that the pH level in saliva is divided into stages from 0 to 14, and the lower the value based on step 7, the higher the fatigue, and the lower the fatigue. In particular, in enclosed vehicles, drowsiness and fatigue due to increased carbon dioxide have increased, leading to a major cause of traffic accidents. Therefore, fatigue may be detected in advance by analyzing fatigue through a change in pH level by supplying oxygen during operation. The electromotive force generated by the existing itself is a level of several mV to develop a pH measurement system, so it is developed by expanding it to a range that can be measured using a readout circuit. In the experiment, 13 male experimenters in their 20s measured pH levels in resting and driving conditions. After 20 minutes of rest, the process of inhaling oxygen for 20 minutes was repeated three times. The oxygen concentration used in the experiment was 21% oxygen and 30% oxygen concentration in the atmospheric state, and in the oxygen supply method, a triangular flask was directly connected to the subject’s nose and then oxygen was supplied. As a result of collecting and analyzing saliva after rest and operation, it was confirmed that the pH level tended to decrease in the operating state. In addition, as a result of increasing the pH level when the oxygen concentration is 30% more than 21%, it is confirmed that fatigue tends to decrease as the oxygen concentration increases. Therefore, it was possible to confirm a significant change in fatigue by analyzing the pH level of saliva through this pH measurement system. This study can be used as a fatigue test in various environments through simple pH measurement.

식품 소비에 있어 어류가 주요한 단백질의 공급원으로서 역할이 증대됨에 따라 기존 육류 중심으로 이루어졌던 수요분석 연구가 어류를 포함한 수산물까지 확대되어 다양한 연구결과가 발표되고 있다. 그럼에도 불구 어류 수요분석에 대한 기존 연구들은 소비량 및 가격데이터 등 데이터 확보의 어려움으로 도매 혹은 소매 단계의 시장수요를 추정하여 소비자 개인의 수요함수를 추정하지 못한 한계를 가지고 있다. 이에 본 연구에서는 주요 어종의 1인당 소비량과 소비자가격 데이터로 DAIDS (Dynamic Almost Ideal Demand System) 모형을 활용하여 개별 소비자의 수요함수를 추정함으로써 기존 연구와 차별성을 두었다. 실증 분석 결과, 소득탄력성의 경우 멸치가 가장 크고 오징어, 고등어, 갈치, 명태 순으로 멸치를 제외하고는 소득변화에 비탄력적이었다. 자체가격탄력성은 품목 간 다소 차이가 있지만 5개 품목 모두 자체가격에 대해 비탄력적이었으며, 어종 간 교차가격탄력성은 고등어와 갈치, 갈치와 멸치를 제외하고는 상호보완 관계가 있는 것으로 분석되었다. 이는 우리나라에서 주요 소비되는 어종이 서로 대체하기 보다는 상호 보완적인 관계로 수산물 소비가 단일 품목으로 이루어지기 보다는 다양한 수산물과 함께 이루어지기 때문인 것으로 판단된다.

n Korea, the decommissioning of nuclear power plants is being prepared, and a large amount of radioactive waste is expected to be generated. In particular, clearance level waste, which accounts for more than 90%, requires prevention of cross-contamination and prompt classification. In this study, the possible exposure route and the derivation of exposure dose for worker exposure management in a movable analysis system that can be analyzed onsite were studied. The movable radionuclide analysis system is divided into a preparatory room, a sample storage room, a radioanalysis room, a laboratory, and a waste storage room. It consists of one radioanalysis worker and one pre-treatment worker, and the main radiation exposure is expected to occur in the movement path in the sample storage room, radioanalysis room, and laboratory. The source term for the exposure evaluation, the annual usage dose presented in the radiation safety report in the movable radionuclide analysis system was used. The input data for the evaluation of the external exposure dose under normal circumstances (exposure situation, working hours, distance, etc.) is referenced at facility specifications. The internal exposure dose evaluation was assumed to be acute exposure (1 hour) assumed as internal pollution due to the drop in liquid sample during the pretreatment work. As an evaluation method, a method using a calculation formula and a method using an evaluation code was performed. For the evaluation of exposure dose using the calculation formula, a preliminary evaluation was performed using the point source method, the point kernel method, and intake and dose conversion factors. In addition, VISIPLAN and IMBA codes were used to evaluate exposure dose using the evaluation code, and the input data were supplemented for evaluation. As a result of the evaluation, the annual exposure dose limit of 20 mSv was satisfied for both normal and non-normal situations. In future research, it is planned to derive the evaluation results by particular scenarios for the detailed movement route and evaluation time according to the work process in the mobile radionuclide analysis.

This study is to investigate fuel cladding temperature in a transport system for the purpose of developing a methodology for evaluating the thermal performance of spent fuel. Detailed temperature analysis in the transport system is important because the degradation mechanism of the fuel cladding is generally sensitive to temperature and temperature history. In such a system, the magnitude of the temperature change is determined by examining the temperature sensitivity of fuel assemblies and system components including fuel cladding temperature, considering the material properties, component specifications, component aging mechanism, and heat transfer mechanism. The sensitivity analysis is performed using heat transfer models by computational fluid dynamics for the horizontal transport system. The heat transfer within the system by convection, conduction and thermal radiation is calculated by thermal-hydraulic analysis code FLUENT. The calculation region is divided into a basket cell and a transport cask. The thermal analysis of the basket cell is for predicting the fuel cladding temperature. And the reason for analyzing the transport cask is to provide the boundary condition for the basket cell by reflecting the external environmental conditions. Here, the basket cell containing the spent fuel assembly is modeled on the homogeneous effective thermal conductivity. The purpose of this analysis is to evaluate fuel cladding temperatures for the following four main items. That is the effect of surface emissivity changes in basket due to the oxide layer of the fuel cladding, the effect of degradation of the canister backfill helium gas, the effect of fuel assembly position in basket cell on fuel cladding and basket temperatures in canister, and the effect of using the homogeneous effective thermal conductivity model instead of the fuel assembly in basket cell. As a result of the analysis, the maximum temperatures in basket cells are evaluated for the above four items. Thermal margins for each item are investigated for thermal performance requirements (e.g., peak clad temperature below 400oC).

The bilateral nuclear cooperation agreement provides the basis for technical and economic exchanges and research and development cooperation in the nuclear industry, while also having an important role in the peaceful use of nuclear power. The government of Republic of Korea has signed the supplementary and additional arrangements with the United States, Canada, and Australia to specify detailed procedures necessary for the implementation of the agreement. Currently, items under the bilateral nuclear cooperation agreement (i.e., obligated items) are managed through official documents and e-mails, and it is difficult for the government to systemically track item inventory and identify the person in charge. Another issue is the discrepancy of information between the annual report on obligated items and the report under the import and export procedure. In order to solve these problems, the government is establishing an import and export management system for obligated items to enhance transparency and national reliability in Korea. The ultimate purpose of this project is to not only faithfully fulfill the obligations under the bilateral nuclear cooperation agreement, but also to increase the efficiency of implementation work through systematization of databases and management of obligated items. In this paper, an improved management procedures are suggested by analyzing the required functions and problems. Also, this paper provides a conceptual design that can be applied to the management system for it obligated items by identifying and analyzing practical problems in the import and export management of mandatory items. As a result, key considerations and the conceptual design proposal for the ‘export and import management system for items subject to the nuclear bilateral cooperation agreement’ are derived. The result will be supplemented through continuous discussions with facility operators and the government to be utilized for detailed system design.

By Foreign Trade Act and the relevant laws, any organization which intends to export strategic items shall be classified whether the products, S/W, or technology are strategic items and obtain an export license from the Nuclear Safety and Security Commission (NSSC) in case those are nuclearrelated strategic items. The NSSC and KINAC conduct outreach activities to enhance the recognition and implementation of nuclear export and import control. However, ensuring that all target organizations identify and comply with relevant legislation and laws is difficult. Therefore, the government and regulators should continuously make efforts to reduce blind spots for nuclear export and import control. KINAC established the National Nuclear Technology Information Collection and Analysis System (NNTICAS) to find nuclear-related companies through online website information of various companies and to list organizations that handle nuclear-related strategic items. Based on the NICE corporate information website, NNTICAS finds related companies using dynamic collection methods through interactions such as search word input, search button input, check box click, and collected text from each company website using static collection methods through URL address access and HTML source code extraction. After that, the text contained on the company website is analyzed to check whether the predefined normalized word is included, and if the normalized word appears at a certain number or higher, it is judged as a potential target company dealing with nuclearrelated strategic items. Information on the potential target company is compared with the export controlled item list and finally classified as a target company dealing with nuclear-related strategic items. According to the comparison a manually analyzed result of potential target companies and finally selected target companies NNTICAS, it is confirmed that predefined normalized words need to be more detailed, and a controlled item list such as axes (0B001.b.2) needs to be additionally processed. In addition, if the collection is repeated without completing the previous classification of the collected corporate information, it is also possible to collect companies in cosmetics, semiconductors, and displays. Although it was confirmed that some supplementation is needed to use this system to select target companies for the outreach activity, it is also confirmed that target companies for outreach activity can be expanded through this system and is expected to increase the implementation rate and reduce the blind spot for nuclear export and import control.

For countering nuclear proliferation, satellite imagery is being used to monitor suspicious nuclear activities in inaccessible countries or regions. Monitoring such activities involves detecting changes over time in nuclear facilities and their surroundings, and interpreting them based on prior knowledge in terms of nuclear proliferation or weaponisation. Therefore, analysts need to acquire and analyze satellite images periodically and have an understanding of nuclear fuel cycle as well as expertise in remote sensing. Meanwhile, as accessibility of satellite information has been increasing and accordingly a large amount of high-resolution satellite images is available, a lack of experts with expertise in both fields to perform satellite imagery analysis is being concerned. In this regard, the Institute of Korea Nonproliferation and Control (KINAC) has developed a prototype of semi-automatic satellite imagery analysis system that can support monitoring of potential nuclear activities to overcome the limitations of professionals and increase analysis efficiency. The system provides a satellite imagery database that can manage acquired images, and the users can load images from the database and analyze them in stages. The system includes a preprocessing module capable of resizing, correcting and matching images, a change detection module equipped with a pixel-object-based change detection algorithm for multi-temporal images, and a module that automatically generates reports with relevant information. In particular, this system continuously updates open-source information database related to potential nuclear activities and provides users with an integrated analytics platform that can support their interpretation by linking related images and textual information together. As such, the system could save time and cost in processing and interpreting satellite images by providing semi-automated analytic workflows for monitoring potential nuclear activities.