경주 방폐물 처분시설의 1단계 시설로 건설된 지하 사일로 구조는 2014년에 10만 드럼 규모로 완공되어 현재 운영중에 있다. 지하 사일로 구조는 지름 25m, 높이 50m로써 방폐물을 저장하는 실린더부분과 돔 부분으로 구성되어 있으며, 돔부분은 운영터널과 연결 되는 하부 돔 부분과 상부 돔 부분으로 구분할 수 있다. 지하 사일로 구조의 벽체는 철근콘크리트 라이너이고, 두께는 약 1m이다. 본 논문에서는 지하 사일로 구조의 건설과정 및 운영과정의 단계별 유한요소해석을 수행하였다. SMAP-3D 프로그램을 사용하여 2차원 축대칭 유한요소해석을 수행하였다. 2차원 축대칭 유한요소모델의 신뢰성을 검토하고자 3차원 유한요소해석도 수행하였다. 본 논문 에서는 지하 사일로 구조의 구조거동을 분석하고 구조적 안전성을 검토결과를 제시하였다.

Currently, treatment and disposal suitability verification methods have not been established for radioactive waste, such as spent filters temporarily stored in each plant, so the WCP (Waste Certification Program) can be applied to verify the suitability of non-conforming waste at the site. In this study, WCP components such as certification organizations, certification methods, certification documents, and quality assurance (QA) plan that should be considered when developing WCP applicable to spent filter disposal were reviewed and presented. First, a certification organization consists of a certification organization that performs certification work, a certification support organization related to waste generation and treatment, and a quality control organization for waste certification. Especially, the support organization should support the implementation of WCP, so that spent filter processing procedures such as generation information management and immobilization can be properly packaged and transported. Second, in identifying the waste characteristics of the certification method, each characteristic identification procedure and certification method of the acceptance criteria should be described, evidence examining the suitability of general, radiological, physical, chemical, and biological requirements, and processes related to measurement and sampling should be established. In identifying characteristics, satisfaction of waste form, free water requirements, and whether it is subject to immobilization should be checked priorly, and a method of confirming particulate matter and securing filling rate when packaging compressed filters should be included. It is very important to develop a technology for verifying the safety and quality of the immobilized material because immobilization of the filters can be a processing method that satisfies various characteristic criteria. Meanwhile, it is essential to collect samples and develop scaling factors to identify the nuclides of filters and prove that they are below the concentration limits. For chemical and biological requirements, the characteristics are identified through generation information documents, corrective actions are taken and documented in case of nonconformance. Third, certification documents should include immobilization procedure manual, characteristic report, and characteristic test manuals such as free water, particulate matter and filling rate, radiation measurement method manual for packages, profile, and generation documents. Fourth, the QA plan should analyze the QA system of the plants, check the QA inspection details, establish general requirements for QA of spent filter disposal, and specify step-by-step certification work QA activities. In this study, considerations to ensure the disposal suitability at all stages from generation to disposal of spent filter were presented, and development of a WCP could contribute to preventing nonconformance.

Source localization technique using acoustic emission (AE) has been widely used to track the accurate location of the damaged structure. The principle of localization is based on signal velocity and the time difference of arrival (TDOF) obtained from different signals for the specific source. However, signal velocity changes depending on the frequency domain of signals. In addition, the TDOF is dependent on the signal threshold which affects the prediction accuracy. In this study, a convolutional neural network (CNN)-based approach is used to overcome the existing problem. The concrete block corresponding to 1.3×1.3×1.3 m size is prepared according to the mixing ratio of Wolseong low-to-intermediate level radioactive waste disposal concrete materials. The source is excited using an impact hammer, and signals were acquired through eight AE sensors attached to the concrete block and a multi-channel AE measurement system. The different signals for a specific source are time-synchronized to obtain TDOF information and are transformed into a time-frequency domain using continuous wavelet transform (CWT) for consideration of various frequencies. The developed CNN model is compared with the conventional TDOF-based method using the testing dataset. The result suggests that the CNN-based method can contribute to the improvement of localization performance.

In a recent preliminary inspection for disposal, the glass fiber waste (GFW), used as a pipe insulation, was judged as “pending evaluation” because some dust was found in drum opening tests. Therefore, additional inspection is required to ensure that the package corresponds with the acceptance criteria of the particulates. The dust was generated presumably due to GFW being used in a high-temperature environment for a long time, thus being easily degraded and crushed. For this reason, safety issues that may occur in the process of handling, transportation, and disposal are emerging. Therefore, in this study, a preliminary safety assessment of GFW disposal was performed, the exposure dose to the general public was derived, and compared with the dose limit. The evaluation was carried out in the following order: (1) evaluation of GFW radiation source term, (2) selection of accident scenario, (3) calculation of exposure dose, (4) comparison of evaluation results with dose limits, and confirmation of satisfaction. The average radioactivity of the GFW to be disposed of was used as the source term, and the main nuclides were identified as H-3, Fe-55, Co-60, Ni-63, and Pu-241. In general, the types of accidents that can occur at disposal facilities can be classified into falls, fires, collisions during transportation, off-site accidents, and nuclear criticality, and the accident scenarios are selected by analyzing and reviewing the probability of each accident. In this study, the accident analysis and scenarios presented in the safety assessment of the KORAD were reviewed, and the fire in the treatment facility, the fire in the storage facility, and the collision of the transport vehicle were selected as the evaluation scenarios. When an accident occurs, the radioactive material inside the container leaks out and diffuses into the atmosphere. In this evaluation, the internal and external exposure of the general public due to radioactive plume at the site boundary was evaluated and the dose conversion factors from ICRP-72 and FGR 12 were used. Based on the evaluation, general public was exposed to 0.004 mSv, 0.013 mSv, and 0.045 mSv, respectively, due to a fire at a treatment facility, at a storage facility, and in a transport vehicle. Most of the dose is due to internal exposure by Pu-241 nuclide, because the proportion of it in the waste is high, and when inhaled, the internal dose is high by emitting beta rays. It was confirmed that the result of dose was 0.4%, 1.3% and 4.5% of the annual dose limit, sufficiently satisfying the dose limit and safety.

Low to intermediate radioactive waste disposal concrete structures are subjected to coupled hydromechanical conditions and the identification of structural damage is crucial to ensure safe long-term disposal. Different damage models for concrete and the surrounding rock can affect the damage characteristics of radioactive waste disposal structures. In this study, the effects of different rock damage models are applied to the hydro-mechanical-damage coupled structural analysis of the Wolseong Low and Intermediate Level Radioactive Waste Disposal Center silo. A two-dimensional model of the disposal silo was modeled using the finite element analysis software COMSOL and the Mazars’ damage model was applied to the silo concrete. The Mazars’ model parameters were obtained from uniaxial compression and tensile tests on cylindrical concrete specimens after 28 days of water curing and further 32 days of wet curing at 75°C). The COMSOL embedded Richards equation module was used to simulate hydraulic analysis. Structural loading due to waste disposal was applied at the bottom of the silo structure and the damage evolution characteristics were investigated. The non-linear mechanical rock behavior obtained from laboratory tests (Hoek-Brown criterion, resonant column test, Mazar’s damage model) and field tests (Goodman Jack) were input to assess the effects of different rock damage models. The results highlight the importance of structural damage consideration when assessing the long-term stability and safety of underground radioactive waste disposal structures under coupled hydro-mechanical conditions.

Near-surface disposal facility is more susceptible to intrusion than underground repository, resulting in more possible pathways for contaminant release. Alike human intrusion, animals (e.g. Ants, Moles, etc.) could intrude into the disposal site to excavate burrows, which could cause direct release of contaminants to biosphere. In this paper, animal intrusion is demonstrated using GoldSim’s commercial contaminant transport module and impact on the integrity of the near-surface disposal facility is evaluated in terms of fractional release rate of the contaminants. In this study, the near-surface disposal facility is modelled with a single concrete vault to contain radionuclide according to LLW concentration limit stated in NSSC notice No.2020-6. The release of contaminants is modelled to occur directly after the institutional control period, and the contaminants are mostly transported from the concrete vault to cover layers via diffusion. To produce mathematical model of the release of the contaminants due to animal intrusion, firstly, the fraction of burrow volume for each cover layer is calculated separately for each animal species, based on their maximum possible intrusion depth. In this study, fractions of burrow volume for ants and moles are calculated based on their maximum possible intrusion depths, where for ants is 2–3 m, and for moles is 0.1–0.135 m. Then, assuming that the contaminants are distributed homogeneously throughout each cover layers by diffusion, fraction of contaminants transported into the uppermost layer via excavation of the burrow is calculated for each layer based on burrow volume, and fraction of contaminants removed from the uppermost layer to the layers below via collapse of the burrow is also calculated based on the burrow volume. Lastly, the net transportation of contaminants into and out of the burrow via excavation and collapse, respectively, is calculated and demonstrated using direct transfer rate function of the GoldSim. Based on the simulated result, the maximum mass flux is too minor to cause a meaningful impact on the safety. The peak mass flux of the most sensitive radionuclide, I-129, is witnessed at around year 1,470, with a flux value of 5.36×10−6 g·yr−1. This minor release of the contaminants could be due to cover layers being much thicker than the maximum possible intrusion depth of the animals, preventing the animal intrusion into the deeper layers of higher radionuclide concentration. In future, this study can be used to provide a guidance and fundamental data for scenario development and safety evaluation of the near-surface disposal facility.

In nuclear power plants and nuclear facilities, radioactive waste containing hazardous substances (Mixed waste) is continuously generated due to research such as radiochemical study and nuclide analysis. In addition, radioactive waste including heavy metals and asbestos is generated during the dismantling process of nuclear power plants. Mixed wastes have both radiation hazards and chemical hazards, and there’s a possibility of synergistic effects generation. However, in most countries except the United States, there are no regulatory standards for the chemical hazards of mixed waste. The regulations applicable to mixed waste in Korea include the Nuclear Safety Act and the Waste Management Act. The Nuclear Safety Act prohibits the acceptance of hazardous radioactive waste in disposal facilities, but there is no definition or characteristic identification procedure for “hazardous.” The Waste Management Act also does not state the regulation for radioactive waste. In the Gyeongju disposal facility in Korea, the leachate in the disposal facility is expected to be a groundwater saturated with concrete and is expected to irradiated by radioactive waste. On the other hands, most of the non-radioactive waste landfill facilities are built on the surface, and the leachate is expected to be rainwater that reacts with the soil. Due to the differences in leaching environments, there’s a potential to overestimate or underestimate the leaching properties of hazardous substances if the standard leaching test is applied. To show for this, a leaching test simulating disposal facility’s environment were applied to sample waste containing heavy metals. The leaching solution was groundwater collected from the area near the Gyeongju disposal facility, which is then saturated with concrete and adjusted to pH 12.5. In addition, gamma-ray irradiation was conducted during the leaching test to observe changes in the leaching behavior of heavy metals in the actual radioactive waste disposal environment. As a result, lead showed significantly increased leaching compared to the standard test method, and cadmium was not detected in all experimental conditions except heavy irradiation. This study suggested that regulations on the hazardous of mixed waste should be settled, which should be established in sufficient consideration of the types and characteristics of substances contained in the waste.

When the decommissioning of a nuclear power plant begins in earnest, starting with Kori Unit 1, it is necessary to dispose of intermediate-level wastes such as high-dose waste filters and waste resin stored in the power plant, as well as the internal structures of the reactor. However, there are no intermediate-level waste disposal facilities in Korea, and the maintenance of acceptance criteria considering the physical, chemical, and radiological characteristics of intermediate-level waste is insufficient. In this paper, in preparation for the establishment of domestic intermediate-level waste treatment/disposal and acceptance standards, the following major foreign countries’ legal and institutional standards for intermediate-level waste are reviewed, and based on this, factors to be considered when establishing domestic intermediate-level waste treatment/disposal standards were derived. First, although the USA does not define and manage intermediate-level wastes separately, low-level wastes were separated into Class A, B, and C, where land disposal is allowed, and GTCC, which does not allow land disposal. However, it was recently confirmed that the position was changed to recognize the possibility of land disposal of GTCC waste under the condition that the dose to inadvertent intruders does not exceed 5 mSv·yr−1 and a barrier against inadvertent intrusion valid for 500 years is installed. Second, Sweden classifies intermediate-level wastes into short-lived and longlived intermediate-level wastes. The maximum dose rate permitted on packages are different for each vault and a silo of the SFR where short-lived wastes; 100 mSv·h−1 or less is disposed of in BMA, 10 mSV·h−1 or less in BTF, 2 mSv·h−1 or less in BLA and 500 mSv·h−1 or less in silo. Meanwhile, a repository for long-lived low and intermediate level waste, SFL, which could contains significant amounts of nuclides with a half-life greater than 31 years, operations are planned to commence in 2045. Third, France also manages short-lived intermediate-level wastes and long-lived intermediatelevel wastes separately, and the short-lived intermediate-level wastes were disposed of together with short-lived low-level wastes at the La Manche and L’Aube repository. France announced the Cigéo Project, a high- and medium-level long-lived waste plan in 2012, and submitted the creation authorization application for in 2021 with the goal of operating a repository in 2025. Finally, the UK defines intermediate-level waste as “waste whose activity level exceeds the upper limit for low-level waste but does not require heating, which is considered in the design of storage or disposal facilities” and established NIREX to provide deep disposal of intermediate-level radioactive waste. In Finland, wastes with radioactive concentrations of 1 MBq/kg to 10 GBq·kg−1 are classified as intermediatelevel wastes, and a repository was constructed and operated in a bedrock of about 110 m underground. Because the domestic classification standard simply classifies intermediate-level waste as waste exceeding the activity level of low-level waste limit, not high-level wastes, it is necessary to establish treatment and disposal standards by subdividing them by dose rate and long-lived radionuclides concentration to safely and efficiently dispose of intermediate-level waste for. Additionally, there is a need to decide whether or not to reflect safety by inadvertent intruders when evaluating the safety of intermediate-level disposal.

It has been discovered that the isosaccharinic acid (ISA) formed in a cellulose degradation leachate were capable of forming soluble complexes with thorium, uranium (IV) and plutonium. Since 1993, the ISA has received particular attention in the literature due to its ability to complex a range of radionuclides, potentially affecting the migration of radionuclides. ISA is formed as a result of interactions between cellulosic materials within the waste inventory and the alkalinity resulting from the use of cementitious materials in the construction of the repository. In an alkaline cementitious environment, cellulose degrades mainly via a peeling-off reaction. The main degradation product is ISA, a polyhydroxy type of ligand forming stable complexes with tri- and tetravalent radionuclides. ISA can have an adverse effect on the sorption of radionuclides to an extent which depends on its concentration in the cement pore water and potentially enhance their mobility. The concentration of ISA is governed by several factors such as cellulose loading, cement porosity, extent of cellulose degradation, etc. The sorption of ISA on cement, however, is the process which governs the concentration of ISA in the pore water. According to the experimental result from a literature, the ISA concentration in facilities with a cellulose loading of 5% is calculated to be of the order of 10−4 M. At this level, the effect of cellulose degradation products on radionuclide sorption is negligibly small. Recently in Korea, cellulous limits as waste acceptance criteria is studying and planning to prepare the detailed requirement for near surface radioactive waste disposal facilities. It is desirable to suggest consideration on cellulose disposal limits around the time that the regulatory body and concern organizations establish the cellulose disposal limits as follows. Firstly, identify the cellulose effect on the sorption of the nuclides as cementitious disposal environments such as affected nuclides, threshold value and contribution to radiological risks under domestic disposal environment. Secondly, make sure and consider the difference between lab-scale experimental conditions and probability occurring in real disposal conditions such as probability for generation and persistence of pH in cellulosic material disposal conditions and cellulosic material disposal methods. Finally, consider characterization of cellulosic material such as polymerization, contents of cellulose in law material and time of degradation process. As a result, desirable cellulose limits are to set up for both safety and economic aspect.

The natural barrier, a component of the deep disposal system, has site-specific characteristics depending on the site of the repository, and is one of the main considerations for long-term safety evaluation after closure along with the engineered barrier among the multiple barrier systems of the repository. The natural barrier is defined in Korea as the natural underground and surface structures that can restrict the exposure of radioactive waste, human intrusion or groundwater infiltration into a disposal facility, and the transfer of radionuclides. It includes bedrocks and soils surrounding the engineered barriers of radioactive wastes [Notice of the NSSC, No. 2020021]. This study analyzed foreign regulatory requirements related to natural barriers, requirements for natural barrier and performance target of Sweden and Finland (safety functions and target characteristics of natural barriers, e.g. natural barrier composition, geological characteristics, hydrogeological characteristics). Overseas regulations and cases referenced to derive regulations of general safety requirements on natural barrier are IAEA SSG-14, SSMFS 2008:21 in Sweden, STUK/Y/4/2018 in Finland, and POSIVA SKB Report 01, a joint report between POSIVA and SKB. The repository site and repository depth should be chosen so that the geological formation provides adequately stable and favorable conditions to ensure that the repository barriers perform as intended over a sufficient period of time. The conditions intended primarily concern temperature- related, hydrological, mechanical (for example, rock mechanics and seismology) and chemical (geochemistry, including groundwater chemistry) factors. Furthermore, the repository site should be located at a secure distance from natural resources exploited today or which may be exploited in the future [SSMFS 2008:21]. Finland regulations also suggests similar requirements [STUK Y-4-2018]. According to the above regulations, POSIVA SKB report 01 mentions both the host rock and the underground opening as natural barriers and requires a safety function, and the main safety functions of the host rock and underground opening are as follows: (1) Isolation from the surface environment; (2) Favorable thermal conditions; (3) Mechanically stable conditions; (4) Chemically favorable conditions; and (5) Favorable hydrogeological conditions with limited transport of solutes. Such safety functions would provide insight for understanding of the natural barrier of deep geological disposal system.

To reduce the environmental burden caused by the disposal of spent nuclear fuel and maximize the utilization of the repository facility, waste burden minimization technology is currently being developed at the Korea Atomic Energy Research Institute (KEARI). The technology includes a nuclide management process that can maximize disposal efficiency by selectively separating and collecting major nuclides in spent nuclear fuel. In addition, for efficient storage facility utilization, the short-term decay heat generated by spent nuclear fuel must be removed from the waste stream. To minimize the short-term thermal load on the repository facility, it is necessary to separate heat generating nuclides such as Cs-137 and Sr-90 from the spent fuel. In particular, Sr-90 must be separated because it generates high heat during the decay process. KAERI has developed a technology for separating Sr nuclides from Group II nuclides separated through the nuclide management process. In this study, we prepared Sr ceramic waste form, SrTiO3, by using the solid-state reaction method for long-term storage for the decay of separated Sr nuclides and evaluated the physicochemical properties of the waste form. Also, the radiological and thermal characteristics of the Sr waste form were evaluated by predicting the composition of Sr nuclides separated through the nuclide management process, and the estimation of centerline temperature was carried out using the experimental thermal data and steady state conduction equation in a long and solid cylinder type waste form. These results provided fundamental data for long-term storage and management of Sr waste.

Korea Atomic Energy Research Institute (KAERI) has investigated Pyroprocessing technology in order to decrease the burden of disposal system and increase availability of useful radionuclides in the spent nuclear fuel (SNF) for future. The treatment and the disposal of SNF, however, are very sensitive issues socially. In addition, under the energy transition policy phasing out nuclear energy gradually there have been demands for alternatives so far. Thus various alternatives should need to be investigated in preparation for unexpected situations. This study has been conducted roughly in effectiveness point of view of alternative pre-managements for SNF, not pyroprocessing technology, in disposal system, consisting of three stages according to the degree of burden in disposal system. Stage I is the case for making safety increase with removing highly-mobile radionuclides from SNF. Stage II is the case for eliminating high-heat radionuclides additionally, alleviating thermal risk in the disposal system. And Stage III is the case for recovering Uranium in addition to Stage II. These options of pre-management are thought to be able to provide an intuitive strategy for effective diversification of the disposal system. Because several types of waste form from pre-management make it possible to develop the effective, newly-composed waste disposal system according to the properties of radionuclides. And the processability of SNF through pre-management might be combination with available core-drilling technology, being able to design various disposal system as well. Even though the whole, detailed unit processes have not designed yet, mass balance and distributions of radionuclides are performed under the appropriate assumption of engineering processes. As a first step the alternative approaches for SNF pre-management for disposal system might be expected to be widely used in implementing SNF management policy in the future.

The decommissioning of a nuclear power plant generates large amounts of radioactive waste, which is of several types. Radioactive concrete powder is classified as low-level waste, which can be disposed of in a landfill. However, its safe disposal in a landfill requires that it be immobilized by solidification using cement. Herein, a safety assessment on the disposal of solidified radioactive concrete powder waste in a conceptual landfill site is performed using RESRAD. Furthermore, sensitivity analyses of certain selected input parameters are conducted to investigate their impact on exposure doses. The exposure doses are estimated, and the relative impact of each pathway on them during the disposal of this waste is assessed. The results of this study can be used to obtain information for designing a landfill site for the safe disposal of low-level radioactive waste generated from the decommissioning of a nuclear power plant.