매년 증가하고 있는 풍해에 대한 대책으로서의 내풍설계는 필수적이다. 사과나무 지주시스템의 내풍설계를 위해서는 우선적으로 사과나무에 작용하는 풍하중을 파악해야 하고, 이를 위해서는 사과나무의 항력계수 산정이 필요하다. 기존 항력계수 산정 방법에서 발생할 수 있는 실험적 오차 등의 문제점을 보완하고자, 하중 측정 장치의 제작을 통한 풍하중 직접 측정 및 이를 통한 항력계수의 역추정 과정을 수행하였다. 풍속이 증가할수록 항력계수는 감소하며 점차 수렴하는 경향을 나타냈으며, 풍속 30m/s 일 때, 전면적 기준 약 0.176, 순면적 기준 약 0.356 의 값을 갖는 것으로 나타났다.

The purpose of this study is to research into which characteristic is shown according to a change in filler metal in case of CO2 gas arc welding by using Automobile Structural Steel(ATOS80). The major characteristics of this study were experimented by having Bevel angle as 50°, Root gap as 3mm, Filler metal as Solid wire & Flux wire, and the projected length of wire as 15mm. This study made the welded test specimens for the KS specification in advance suitably for the conditions, thereby having comparatively analyzed with the data value that was obtained through tensile test, hardness test, impact test and Macro Structure Detecting. Arranging the results that analyzed finally, the tensile strength and the hardness appeared to be excellent in case of welding with flux wire. The impact strength was indicated to be superior in case of welding with solid wire.

The new rotary friction damper was developed using several two-nodal rotary frictional components with different clamping forces. Because of these components, the rotary friction damper can be activated by building movements due to lateral forces such as a wind and earthquake. In this paper, various dependency tests such as displacement amplitude, forcing frequency and long term cyclic loading were carried out to evaluate on the structural performance and the multi-slip mechanism of the new damper. Test results show that the multi-slip mechanism is verified and friction coefficients are dependent on displacement amplitute and forcing frequency except long term cyclic loading.

To overcome the weakness of spread foundation in large space structure, the research of precast pile for replace spread foundation have been conducted. The new type of joint between PHC pile and steel column is named HAT Joint(Hollow hAlf-sphere cast-sTeel Joint). It connected PHC Pile by bolt that verification of bolt connection should be accomplished. In this paper, pull-out test and flexural performance for HAT Joint to verifying the bolt connection is explained. As a result, the pull-out and flexural capacities of bolt were checked to use in real structure. Furthermore, the equation of pull-out strength was proposed.

Various hybrid dampers have been developed in Korea to control the vibration due to a wind and earthquake. In order to minimize the installment space, cost and construction process, the new hybrid friction damper is developed. This hybrid damper is composed of several rotary friction components having two frictional joint. Because of these components, the building vibration due to wind and earthquake can be mitigated by hybrid friction damper. In this paper, various dependency tests were carried out to evaluate on the structural performance of two joint rotational friction component of the hybrid damper. Test results show that two joint rotational components do not depend on a displacement and a frequency of forcing but friction coefficients is reducing as a clamping force is increasing.

The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

The industrialization and urbanization forced to increase the density of pipelines such as water supply, sewers, and gas pipelines. The materials used for the existing pipe lines are mostly composed of concretes and steels, but it is true that the development for more durable and efficient materials has been continued performed to produce long lasting pipe lines. Recently, underground pipes serve in diverse applications such as sewer lines, drain lines, water mains, gas lines, telephone and electrical conduits, culverts, oil lines, etc. In this paper, we present the result of investigation pertaining to the structural behavior of unplasticized polyvinyl chloride (PVC-U) flexible pipes buried underground. In the investigation of structural behavior such as a ring deflection, pipe stiffness, 4-point bending test, experimental and analytical studies are conducted. In addition, pipe stiffness is determined by the parallel plate loading tests and the finite element analysis. The difference between test and analysis is about 8% although there are significant variations in the mechanical properties of the pipe material. In addition, it was found by the 4-point bending test there is no problem in the connection between the pipes by coupler.

In this paper, we present the result of analytical investigation pertaining to the structural behavior of steel-concrete composite plate girder with arch-type web stiffener. In the arch-type web stiffener located in the compression side of web, infill concrete is cast to strengthen the arch-type stiffener and also to exert resisting force against compression force. This type of composite steel-concrete plate girder bridge is built and is in service. To understand the behavior thoroughly, analytical parametric study was conducted by using the finite element method. As a result it was found that the effect of arch-type stiffener with infill concrete is considerable for the design of such type composite girder bridge.

Numerical analysis was performed to analysis the structural characteristics of the head device in the road mower system. The head device connects mower system with the boom of the special vehicle. The system with various road surface conditions is subjected to continuous vibration and repeated load. Especially, the maximum equivalent stress occurs in the pillar of the head device, and the maximum equivalent strain also occurs in the fixed plate that supports the mower system. Fatigue analysis results show that the upper end of the pillar is very vulnerable. This analysis results can be used as basic data for optimal road mower head system design.

This study on Structural analysis of kickboard used two types suspension systems. Kickboard is very dangerous in rider because of unstable in diving conditions. Thus suspension system of kickboard are very important component parts. This study focus on two suspensions for stability in kickboard which coil spring and aluminium leaf spring.

The structural aesthetics of architecture are becoming an inspirational source for many fashion designers and have been reborn in structural fashion. This study planned to analyze the method of expression of structural aesthetics expressed in modern structural fashion design and the construction method to maximize such an effect on the basis of the construction characteristic of Santiago Calatrava as the representative architect of the structural aesthetic. According to the study, the structural aesthetics expressed in modern structural fashion design are as follows: 1) The symbolical formative aesthetic expressed by symbolical inference and analyzation; 2) the dynamic beauty of physic expressed by visual emphasis and dynamics; and 3) the asymmetric beauty of symmetry expressed by metastasis toward the boundary between balance and imbalance. In addition, to maximize structural aesthetics, we used repetition and a progressive technique based on rhythm, asymmetry, and incision-based variances, such as balance, polygon flux, and inference, and analyzation-based distortion as the structuring principle. The following expression methods for maximizing structural aesthetics were found: 1) symbolical and structural exaggeration of appearance; 2) detail technique expansion and material property diversification; and 3) the three-dimensional transformation of structure and shell expression. Structural fashion design was found to have maximized structural aesthetics by using such expression methods to secure artistic esthetics, destroy existing shapes and patterns, and create unique shapes.

기존 구조물의 손상평가에 관한 연구는 지진 등과 같은 과도한 하중에 의한 손상을 고려하였다. 그러나 구조물은 과도한 하중없이도 장기간의 시간에 따라 염화물, 탄성화 등과 같은 이유로 노후화가 진행되어 구조성능이 저하될 수 있다. 그래서 구조물의 건전도를 효과적으로 관리하기 위해서는 노후화에 의한 구조성능 저하도 검토되어야 한다. 본 연구에서는 염화물에 의한 철근의 부식을 노후화 요인으로 고려한다. 철근부식에 의한 재료의 구조성능 저하를 고려하기 위해 부식정도에 따른 철근의 단면적, 항복강도, 파단변형률, 피복 콘크리트 강도 등을 예측한다. 이를 구조모델링에 적용하여 구조부재 및 구조물의 구조성능 저하를 분석한다. 구조부재의 구조성능을 분석하기 위해 모멘트-곡률 해석을 수행한다. 구조물 레벨의 구조성능을 고려하기 위해, 고유치해석을 통한 고유주기와 모드형상을 분석한다. 또한 비선형 정적해석을 통해 구조물의 강도와 변형성능을 분석한다.

원자로 격납건물은 냉각재상실사고와 같이 내부의 과도한 압력이 유발되는 사고에 있어서도 방사성 물질이 외부로 누출되지 않도록 막는 최종의 방벽이다. 이러한 격납건물의 기능적 중요성에 기인하여, 건설 초기 구조건전성시험(SIT)을 수행한다. 이러한 SIT거동을 가장 실제와 가깝게 예측하기 위한 해석 연구를 수행하였다. 해당 연구의 결과는 2편의 논문으로 정리되었는데, 본 논문은 그 중 II편으로 I편의 해석모델 구성 시의 주요 고려사항의 분석 및 예비해석 결과를 반영한 상세 해석 모델의 구성 과정 및 해석 결과를 제시하고 있다. 특히 비부착식 텐던으로 시공된 구조물에서 덕트관에 의한 강성 저감효과 및 덕트관을 사이에 둔 텐던과 콘크리트간의 밀착 여부에 따른 영향을 해석 시 최대한 고려하고자 하였다. 이러한 과정을 통해 구축된 해석 모델에 따른 변위과 신고리 3호기 SIT 측정변위를 비교한 결과, ASME CC-6000 기준을 충분히 만족시키는 결과가 나타남을 확인하였다.

원자로 격납건물은 냉각재상실사고와 같이 내부의 과도한 압력이 유발되는 사고에 있어서도 방사성 물질이 외부로 누출되지 않도록 막는 최종의 방벽이다. 이러한 격납건물의 기능적 중요성에 기인하여, 건설 초기 구조건전성시험(SIT)을 수행한다. 신고리 3호기 SIT 시험 당시 계측된 변위를 예측하기 위한 초기 해석 모델은 일부 위치에서 실제 변위를 과소 평가하는 경향을 보임에 따라 이를 개선하고자 하는 연구가 수행되었다. 해당 연구의 결과를 I 편과 II 편의 논문으로 정리하였으며, 본 I 편에서는 초기 해석모델을 개선해가는 과정에서의 해석모델 구성 시의 주요 고려사항의 분석 및 예비해석 결과를 제시하고 있다. 우선적으로 콘크리트 자체의 해석요소(mesh) 구성과 라이너, 철근, 텐던 등의 요소간의 연결 설정이 중요함을 확인하였다. 또한, 다양한 예비해석의 결과를 통해 비부착식 텐던으로 시공된 구조물에서 덕트관에 의한 강성 저감 효과 및 덕트관을 사이에 둔 텐던과 콘크리트간의 밀착 여부에 따른 강성 영향을 적절히 고려하는 것이 중요함을 확인하였다.

건물외피 발생하는 열교현상은 건물의 단열성능 및 외피의 내구성에 영향을 미치며, 국내의 일반적인 주거형식인 공동주택의 발코니에 있어서 이러한 열교현상은 중요하게 고려되고 있다. 이와 같이 내·외부 발코니 슬래브 사이에서 발생하는 열교현상을 최소화하기 위한 목적으로 열교차단장치가 개발되었으며 다수의 건설현장에서 적용되고 있다. 철근콘크리트 슬래브 벽-슬래브 접합부에 열교차단장치를 적용함으로써 건물의 단열성능을 향상될 수 있으나 풍하중과 같은 양방향의 하중에 의해 열교차단장치 삽입부위가 적합한 구조성능을 확보하고 있는지에 대한 검증이 요구된다. 따라서 본 연구에서는 철근콘크리트 슬래브에 적용된 열교차단장치의 구조성능을 확인하기 위해 변위제어 방식으로 30 싸이클의 반복하중을 가력하였다. 열교차단장치가 삽입된 접합부는 요구되는 구조성능을 확보하며, 최대 모멘트강도, 에너지소산능력, 연성비가 기존의 철근콘크리트 슬래브와 비교하여 향상되는 것으로 나타났다.

새로운 기능성 소득 작물로서의 가치 향상과 재배기술 보급을 위한 기초자료로 활용하기 위하여 가을 울금의 curcumin 유도체 분리 및 구조를 분석하였으며, 지표물질에 대한 정량과 정성분석을 하였다. 가을 울금의 근경을 추출하고 column chromatography을 통하여 5종의 물질을 분리하였다. 이들 화합 물은 1H-NMR과 13C-NMR 분석을 행하여 구조를 동정하였다. 이들 화합물은 HPLC로 정량분석한 결과 주요 화합물은 HPLC에서 화합물 1(curcumin): 13.8분, 화합물 2(demethoxycurcumin): 13.1분, 화합 물 3(bisdemethoxycurcumin): 12.6분, 화합물 4(1-hydroxy-1,7-bis(4-hydroxy-3-methoxypheny1) -6-heptene-3,5 -dione): 8.7분, 화합물 5(dihydrocurcumin): 12.1분에서 각각 나타났다.

Bi0.5Na0.5TiO3 (BNT) based ceramics are considered potential lead-free alternatives for Pb(Zr,Ti)O3(PZT) based ceramics in various applications such as sensors, actuators and transducers. However, BNT-based ceramics have lower electromechanical performance as compared with PZT based ceramics. Therefore, in this work, lead-free bulk 0.99[(Bi0.5Na0.5)0.935Ba0.065](1-x)LaxTiO3-0.01SrZO3 (BNBTLax-SZ, with x = 0, 0.01, 0.02) ceramics were synthesized by a conventional solid state reaction The crystal structure, dielectric response, degree of diffuseness and electric-field-induced strain properties were investigated as a function of different La concentrations. All samples were crystallized into a single phase perovskite structure. The temperature dependent dielectric response of La-modified BNBT-SZ ceramics showed lower dielectric response and improved field-induced strain response. The field induced strain increased from 0.17% for pure BNBT-SZ to 0.38 % for 1 mol.% La-modified BNBT-SZ ceramics at an applied electric field of 6 kV/mm. These results show that Lamodified BNBT-SZ ceramic system is expected to be a new candidate material for lead-free electronic devices.