In this study it was developed FRP rod embedding FBG sensor, and compared the performance of sensor of the new rods and the existing strain gauge by applying the reinforced concrete beam-column joint in the same location. And it was found that new FRP rod was improved the structural performance and sufficiently sensing accuracy.

본 연구에서는 기존 철근콘크리트 건물의 보-기둥 접합부의 내진성능의 개선을 위해 보-기둥 접합부 영역을 FRP보강재(매입형 CFRP Rod, CFRP시트)를 사용하여 보강한 후 내진성능을 평가하였다. 총 6개의 실험체를 제작하고 실험을 수행하여 내진성능을 평가하였으며, 본 연구의 실험결과를 근거로 다음과 같은 결론을 얻었다. 기존 철근콘크리트 보-기둥 접합부의 접합부 영역을 보강한 결과, 초기 재하시 접합부 영역의 균열억제 효과와 재하 전 과정을 통하여 보강재의 구속효과로 인하여 균열억제 효과가 커서 안정적인 파괴형태 및 내력향상 효과를 나타내었다. 매입형 CFRP Rod와 CFRP시트를 활용한 RC 외부 보-기둥 접합부 실험체 RBCJ-SRC2는 표준실험체 RBCJ와 비교하여 변위연성4, 7에서 각각 최대 내력은 1.97배, 에너지소산능력은 2.08배 증가하였다. 또한, 실험체 RBCJ-SR시리즈와 비교하여 최대내력이 1.09~1.11배 증가하였다. 그리고 실험체 RBCJ-CS, RBCJ-SR시리즈, RBCJ-SRC2는 변위연성 5, 6에서 표준실험체 RBCJ 보다 에너지소산능력이 1.10~2.30배 증가하였다. 그리고 에너지소산능력은 변위연성 4에서 13.0~14.4% 증가하였다.

In this study, experimental research was carried out to improve and evaluate the seismic performance of reinforced concrete beam-column joint using Groove and Embedding FRP Rod and CFRP Sheet in existing reinforced concrete building. Test result shows that retrofitting specimen(RBCJ-SR2, SRCB2) designed by the improvement of seismic performance of reinforced concrete beam-column joints load-carrying capacities were increased 1.78 ~ 2.29 times in comparison with the standard specimen.

In this study, strain distribution of the beam end and the end of horizontal stiffener of high-strength steel beam-to-column connections was analyzed by finite element methods. According to the FEM results, applied stiffener method showed that it is available to relieve the strain of maximum stress point of beam member

최근 도심지에서 이루어지는 건축공사의 대부분은 재개발 및 재건축으로 인한 중.소규모 형태의 건축공사이다. 또한, 한정된 토지의 효율적인 이용을 위하여, 지하층 공사가 고심도화 되고 있다. 이러한 이유로 도심지 공사에서는 역타공법을 많이 적용하고 있으며, 이에 대한 많은 기술 개발이 진행되고 있다. 본 연구에서는 CFT 강관기둥을 이용한 철골조 역타공법 개발을 위하여 Y형 플레이트를 이용한 지하층 CFT기둥과 H형강보의 접합상세를 제안하였으며, 이에 대한 구조성능 평가를 수행하였다. Y형 플레이트를 이용한 접합상세의 효율적인 구조설계를 위하여, 구조성능에 영향을 줄 수 있는 다양한 형태의 영향 변수를 설정하고, 각각의 변수들에 대한 영향력 평가를 위하여 유한요소해석을 수행하였다. 도출된 결과를 바탕으로 효율적인 Y형 플레이트 접합 상세를 제시하였다. 또한, 각 변수들의 영향력을 검증하기 위하여, 실물 크기로 접합부 실험체를 제작하여 각 변수들에 대한 제안된 접합상세의 내력 및 변형 능력을 평가하였다. 성능평가 결과, Y형 플레이트를 이용한 CFT기둥과 H형강보의 접합상세의 구조성능은 우수한 것으로 나타났으며, 역타공법을 적용하는 도심지 건축공사에 유용하게 사용될 수 있을 것으로 기대된다.

In this study, experimental research was carried out to evaluate the structural performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement. Specimens designed by the interior beam-column joint regions without the shear reinforcement of existing reinforced concrete building showed a unstable mode of failure and an decrease in load-carrying capacity and energy dissipation capacity and ductility ratio.

Under cyclic loading, the structural performance of reinforced concrete (RC) beam-column connections is significantly affected by the bond-slip of beam re-bars. In the present study, a bond-slip model was developed to evaluate bond-slip of beam re-bars in beam-column joints. The prediction of the proposed model agreed well with the bond strength degradation and bond-slip in the beam-column joints.

In this study, experimental research was carried out to study the high strength RC exterior beam-column joints regions using reinforcing detailings and high ductile fiber-reinforced mortar. Test results showed that specimen BCJISP were increased th maximum load-carrying capacity and showed stable hysteresis behavior and satisfactory crack pattern in comparison with th standard specimen BCJC.

In this study, experimental research was carried out to improve and evaluate the seismic performance of reinforced concrete beam-column joint using Embedded Carbon Fiber Rod and Carbon Fiber Sheet in existing reinforced concrete building. Test result shows that retrofitting specimen(LBCJ-SP45, CS2, CRUS) designed by the improvement of seismic performance of reinforced concrete beam-column joints load-carrying capacities were increased 1.34 ~ 1.54 times in comparison with the standard specimen.

In this study, an experimental study to investigate the load transfer behavior of the CFT column to steel beam connection was carried out. The load transfer mechanism and the effect of the load transfer length were examined, and the results were also compared with finite element analysis results. Finally, the results are to be used for the basic reference of the design guideline for the CFT column connection.

In this study, shear assessment equation of reinforced concrete interior beam-column joints without shear reinforcement using high ductile fiber reinforced mortar based on the test results was proposed. Suggested equation was proposed to modify Hegger's seismic design equation. It was reflected the effect of high ductile fiber incorporated

In this study, experimental research was carried out to evaluate and improve the constructability and structural performance of high strength R/C interior beam-column joints regions, with or without the shear reinforcement, using high ductile fiber-reinforced mortar. Specimens designed by retrofitting the interior beam-column joint regions of existing reinforced concrete building showed a stable mode of failure and an increase in load-carrying capacity due to the effect of enhancing dispersion of crack control at the time of initial loading and bridging of fiber from retrofitting new high ductile materials during testing.

The purpose of this study was to evaluate the seismic performance of high-performance steel. For this study, the hysteretic behavior and deformation shape of steel beam-to-column connections with SM570TMC was investigated using non-linear finite element analysis. The non-linear finite element analysis was carried out using ANSYS. The displacement analysis of steel beam-to-column connections was conducted according to the qualifying procedures of current korean building code(KBC2009).

To evaluate the ductility of high strength steel beam-to-column connections, Cycle loading connection test was conducted targeting HSA800 steel being developed in Korea and parameter is connection details. According to the study, The non-scallop detail and improved horizontal rib reinforcement detail used in this study enhanced deformation capacity of high strength steel connections which have brittle tendency by stress relaxation.

Connection details were developed for the composite column using high strength steel angles. Load-carrying capacity, deformation capacity, and load transfer mechanism of three beam-to-column joint specimens were evaluated under cyclic load tests. In the experiments, mega columns were used for the application in high-rise buildings

Under cyclic loading, the shear capacity of reinforced concrete (RC) beam-column connections is significantly decreased by the joint bond-slip and shear cracking as deformation increases. In the present study, Joint shear strength model on the basis of bond-slip was developed to evaluate deformability at the joint shear failure.

In this study, experimental research was carried out to study the high strength RC exterior beam-column joints regions, without the shear reinforcement, using high ductile fiber-reinforced mortar. Test results showed that specimen BCJNSP1.0 were increased th maximum load-carrying capacity and showed stable hysteresis behavior and satisfactory crack pattern in comparison with th specimen BCJNS without shear reinforcement in the beam-column joint region.

In this study, experimental research was carried out to study the high strength RC exterior beam-column joints regions, without the shear reinforcement, using high ductile fiber-reinforced mortar. Specimens designed by retrofitting the exterior beam-column joint regions of existing reinforced concrete building showed a stable mode of failure and an increase in shear strength capacity due to the effect of enhancing dispersion of crack control at the time of initial loading and bridging of fiber from retrofitting new high ductile materials during testing.

In this paper, a moment resisting precast concrete beam-to-column connection is proposed for high seismic zones using bolt type connection. An experimental study was carried out to investigate the behavior of the proposed connection subjected to cyclic loading

In this study, experimental research was carried out to improve and evaluate the seismic performance of reinforced concrete beam-column joint using carbon fiber sheets in existing reinforced concrete building. Test result shows that retrofitting specimen(LBCJ-CS1, CS2) designed by the improvement of seismic performance of reinforced concrete beam-column joints load-carrying capacities were increased 1.26～1.35 times in comparison with the standard specimen.