Coal-tar pitch, a feedstock which can be heat-treated to create graphite, is composed of very complex molecules. Coal-tar pitch is a precursor of many useful carbon materials (e.g., graphite, carbon fibers, electrodes and matrices of carbon/carbon composites). Modified coal-tar pitch (MCTP) was prepared using two different heat-treatment methods and their properties were characterized and compared. One was prepared using heat treatment in nitrogen gas; the other was prepared under a pressure of 350 mmHg in air. The MCTPs were investigated to determine several properties, including softening point, C/H ratio, coke yield, formation of anisotropic mesophase and viscosity. The MCTPs were subject to considerable changes in chemical composition due to condensation and polymerization in the used-as-received coal-tar pitch after heat-treatment under different conditions. The MCTPs showed considerable increases in softening point, C/H ratio, and coke yield, compared to those of as-received coal-tar pitch. The MCTP formed by heat-treatment in nitrogen showed isotropic phases below 350˚C for 1 h of soaking time. However, MCTP heat-treated under high pressure (350 mmHg) showed isotropic phases below 300˚C, and showed anisotropic phases above 350˚C, for 1 h of soaking time. The viscosity of the MCTPs increased with increase in their softening points.

Ecological restoration is regarded as a major strategy for preventing biodiversity loss and thereby enhancing ecosystem service. This study was performed to evaluate ecosystem service value that the restored ecosystem provides. Ecosystem service was evaluated for provisioning and regulating services. The former service was evaluated by comparing similarities in a viewpoint of floristic composition to the reference site between the restored and the unrestored sites. Species composition of the restored site was found to be more similar to the reference site than that of the unrestored site and thereby restoration practice contributed for enhancing the provisioning service. Regulating service was evaluated based on microclimate control, soil amelioration, and improvement of water holding capacity. The value of ecosystem services in terms of microclimate control, soil amelioration, and improvement of water holding capacity was higher in the restored site than in the unrestored site. In consequence, ecological restoration of coal mine spoils contributed for enhancing the ecosystem service value of the corresponding site and thereby is rewarding the cost invested for restoration.

Ink-jet printing technology has been widely attractive due to its facility for direct and fine printing on various substrates. Recent studies have focused on expanding the application of ink-jet printing technology from general consumer use and design companies to the prototype production of precision parts and parts manufacturing. The use of ink-jet printing technology in decorated tableware, tiles, and other ceramic products also has many advantages. The printing process is fast and can be adaptable to various kinds of objects because there is no direct contact point between the printer and the substrates to be printed. For application to ceramic product decoration, inks containing highly dispersed inorganic nano-pigments are required. Here we report the synthesis and characterization of blue CoAl2O4 nanopigment for ink-jet printing. Blue ceramic ink based on the obtained CoAl2O4 pigment was prepared by dissolving CoAl2O4 pigment in a mixed solution of ethylene glycol and ethanol with volume ratios of 7:3 and 8:2, respectively, to obtain the appropriate viscosity for ink-jet printing. The ink solution contained 15 wt% of CoAl2O4 pigment and Cetyltrimethyl ammonium bromide(CTAB) and Sodium dodecyl sulfate(SDS) as dispersive agents. The prepared blue ceramic ink was stably jetted and formed a sphere-shaped droplet from an ink-jet printer.

Coal tar is the primary feedstock of premium graphitizable carbon precursor. Coal tars are residues formed as byproducts of thermal treatments of coal. Coal tar pitches were prepared through two different heat treatment schedules and their properties were characterized. One was prepared with argon and oxidation treatment with oxygen; the other was prepared with oxygen treatment at low temperature and then argon treatment at high temperature; both used coal tar to prepare coal tar pitches. To modulate the properties, different heat treatment temperatures (300~400˚C) were used for the coal tar pitches. The prepared coal tar pitches were investigated to determine several properties, such as softening point, C/H ratio, coke yield, and aromaticity index. The coal tar pitches were subject to considerable changes in chemical composition that arose due to polymerization after heat treatment. Coal tar pitch showed considerable increases in softening point, C/H ratio, coke yields, and aromaticity index compared to those characteristics for coal tar. The contents of gamma resin, which consists of low molecular weight compounds in the pitches and is insoluble in toluene, showed that the degree of polymerization in the pitches was proportional to C/H ratio. Using an oxidizing atmosphere like air to prepare the pitches from coal tar was an effective way to increase the aromaticity index at relatively low temperature.

This study considered the effect of the heat treatment temperature on the compressive strength of coal powder compacts affected by density, porosity, and crystallinity. Coal powder compacts were made by pressing of milled coal powder and were heat treated at 200, 400, 600, 800, and 1000℃. The density and porosity of the heat treated specimens at each temperature were measured using the Archimedes method and changes in crystallinity were analyzed using Raman spectroscopy. Increases in compressive strength at 600℃ or higher temperatures were proportionally related to increases in the density and the degree of crystallinity.

몽골은 석탄 매장량이 매우 풍부하고 석유연료를 전적으로 수입에 의존하기 때문에, 석탄액화플랜트 건설에 필요한 충분한 여건을 갖추고 있다. 본 연구에서는 몽골에 하루 10,000배럴의 석유연료를 생산할 수 있는 석탄액화플랜트를 건설할 경우에 대한 경제성분석을 수행한다. 먼저 기존에 있는 산업계의 석탄액화플랜트 프로젝트 데이터와 학계의 연구결과를 토대로 몽골 석탄액화플랜트 건설에 필요한 비용과 기대수명, 그리고 예상 수명기간 동안 운영했을 때 발생하는 운영

석탄회는 독특한 화학조성과 광물학적 특징을 가지고 있다. 본 연구는 해안가에 위치한 영동화력발전소의 매립 호수에서 배출되는 석탄회와 주변 해수와의 반응에서 토착 미생물이 중금속 용출에 어떤 영향을 미치는지를 알아보았다. 매립 호수의 pH는 6.3-8.5로 나타났다. 본 연구를 위해 매립 호수의 세 지점을 선정하여 각 지점에서 석탄회(0.4 L)와 해수(1.6 L)가 혼합된 세 개의 시료를 채취하였다. 채취한 시료는 각각 120˚C, 2.5기압 환경하에서 멸균 처리하고, 미생물의 활동을 촉진하기 위해 글루코스를 첨가하여 배양하였으며, 나머지 하나는 자연 상태로 60일 동안 보관하면서 박테리아의 활동에 따른 지화학적 변화과정을 살펴보았다. 다른 시료와 비교하여 글루코스를 첨가한 시료에서 15일 후에 알카리도가 크게 증가하였으며, Mg, Ca, K와 같은 양이온은 글루코스를 넣은 시료에서 초기에 증가하다가 15일 이후 감소하였다. SO42-는 글루코스를 첨가한 시료에서 크게 감소하였다. 이러한 지화학적 결과는 매립 호수에 서식하는 박테리아의 활동성과 관련이 있다. 이러한 결과는 석탄회 내에 서식하는 박테리아의 특성을 이해하기 위한 기초자료로서 활용될 수 있을 것으로 판단된다.

Glass was fabricated using refused coal ore obtained from the Dogye coal mine in Samcheok. We additionally used soda ash and calcium carbonate to make a glass with the chemical composition of soda-lime glass, and we also used white, brown, and green glass cullet to make various kinds of colored glass. Transparent glass was fabricated by melting batch materials including refused coal ore at 1550˚C for 1 hr in an electrical furnace. The light transmittance and color chromaticity were measured by a UV/VIS/NIR spectrometer. Transparent glass with a light transmittance of over 80% was fabricated using normal refused coal ore and white glass cullet. Various kinds of colored glass with a light transmittance of 30-80% were fabricated using refused coal ore and brown or green glass cullet. The light transmittance of the mixed color glass samples, fabricated using normal refused coal ore and brown glass cullet and green glass cullet, indicated 30-47%, a relatively low value, in the condition of a cullet ratio of 20-50%. The characteristics of the color chromaticity of the glass samples were indicated in a chromaticity diagram by x-coordinates, y-coordinates, Y (lightness). The values of x-coordinates and y-coordinates were moved with a regular directional property according to the kind and amount of glass cullet. Therefore, we concluded that refused coal ore can be used for raw materials of color glass products like art glass and glass tile.

포항 분지 제3기 장기층군에서 산출된 화석목재의 고식물학적 연구가 수행되었다. 하부 함탄층의 화석목재는 Ulmus sp., Prunus sp., and Acer sp.의 3속 3종으로, 상부 함탄층의 화석목재는 Taxodioxylon sp.와 Fagus hondoensis (Watari) Watari의 2속 2종으로 각각 동정되었다. 연구에 사용한 표본은 조직의 보존성이 좋지 않아서 종의 동정까지는 어렵지만, 이들은 모두 한국 마이오세 화석목재의 특징적인 구성 요소들이다. 하부 및 상부 함탄층에서 채집한 화석목재의 나이테를 분석하여 얻어진 평균민감도 값은 0.367과 0.370로 비슷하지만, 이들은 0.30보다는 약간 높다. 현재의 두 그룹의 자료만으로 판단하면, 뿌리에 대한 물의 공급은 계절적인 강수량의 변화에 의해 매년 어느 정도 제한을 받았거나 물 공급에 있어 다양한 변화가 있었던 것으로 추정된다.

Glass-ceramics were fabricated by heat-treatment of glass obtained by melting a coal bottom ash with Li2O addition. The main crystal grown in the glass-ceramics, containing 10 wt% Li2O, was β-spodumene solid solution, while in Li2O 20 wt% specimen was mullite, identified using XRD. The activation energy and Avrami constant for crystallization were calculated and showed that bulk crystallization behavior will be predominant, and this expectation agreed with the microstructural observations. The crystal phase grown in Li2O 10 wt% glass-ceramics had a dendrite-like shaped whereas the shape was flake-like in the 20 wt% case. The thermal expansion coefficient of the Li2O 10 wt% glass-ceramics was lower than that of the glass having the same composition, owing to the formation of a β-spodumene phase. For example, the thermal expansion coefficient of Li2O 10 wt% glass-ceramics was 20×10-7, which is enough for application in various heat-resistance fields. But above 20 wt% Li2O, the thermal coefficient expansion of glass-ceramics, on the contrary, was higher than that of the same composition glass, due to formation of mullite.

This study was carried out to design and develope conveyer combustion type coal heater in the green house. Different from existing coal heater, the conveyer combustion type coal heater was designed for circulating coal from supplying to exhausting. The size of traveling grate and velocity reduction gear ratio for driving traveling grate were designed to product coal heater had 200,000kcal/hr heating capacity. The result is that the coal heater of 200,000kcal/hr heating capacity was determined by the width of grate in between 600 to 800㎜ when the horizontal length of conveying combustion area was 1,500㎜. And the first and second reduction ratio of 1:100 and 1:70 was more effective at 1,350rpm, respectively, in the coal heater of 200,000kcal/hr heating capacity.

석탄회는 독특한 화학조성과 광물학적 특성을 나타내는 것으로 알려져 있다. 석탄회의 철산화광물에는 중금속원소들이 다량 농집되어 있어서 침출이 일어나는 환경에서는 토양과 지하수 및 해양오염의 가능성이 높다. 본 연구에서는 해안가에 위치한 당진화력 발전소에서 배출하고 있는 석탄회와 주변 해수와의 반응과정에서 토착 미생물이 어떤 역할을 하는지를 알아보고자 하였다. 이를 위해 해수와 석탄회를 혼합하여 배양기에 60일 동안 보관하면서 물시료와 석탄회 시료를 분석함으로써 박테리아의 활동에 따른 광물의 상변화 및 해수의 지화학적 변화 정도를 살펴보았다. 매립호수에서 해수의 평균 pH는 8.97이다. 지화학적 변화 결과에 비추어 볼 때, 박테리아의 활동은 실험 시작 7일 이후부터 급격하게 활성화되었다. SO42-는 글루코스를 첨가한 시료에서 다른 처리방식에 비해 현저하게 감소하는 경향을 나타낸다. 매립호수에 서식하는 박테리아는 주로 Mn, Fe, Zn와 반응하여 매립호수로부터 금속이온을 제거시킬 수 있을 뿐 아니라 탄산염 광물을 형성하는 과정에서 이산화탄소를 고정시킬 수 있는 역할도 할 수 있을 것으로 기대된다.

Recycling industrial wastes such as fly ash from a coal burning heat power plant and shell from an oyster farming were investigated to prevent environment contamination as well as to enhance the value of recycling materials. In this study, the lightweight aggregates and the red bricks were fabricated from fly ashes with other inorganic materials and wastes. The starting materials of the lightweight aggregate were fly ash powder and water glass, and the compacts of these materials were heat treated at . The fabricated lightweight aggregates had low bulk density, , hence floated on the water and had the strength of 7.0-11.0 MPa and the modulus of 2900-3300 MPa which indicates it has enough strength as the aggregate. Another type of the light weight aggregate was prepared from fly ashes, shell powders and clays. The bulk density, porosity, and compressive strength of these aggregates were and 5-12 MPa, respectively. The addition of a small amount of fly ash powder prevented hydration of the light weight aggregates. The red brick was also fabricated from the fly ash containing materials. It is suitable for the brick facing of a building as it has moderate strength and low water absorption rate.

MCMB (Mesocarbon microbeads) is a kind of anode material for lithium-ion secondary battery. MCMB charge/discharge cycle stability is one of the important criterion at lithium-ion battery operation. In this study, the cycling stability of a lithium-ion secondary battery has been examined. MCMB was made by the direct solvent extraction method. After the MCMB was carbonized and graphitized, the measurement of charge/discharge capacity and efficiency were carried out. In the result, discharge capacity of MCMB in the initial cycle was above 290.0 mAh/g. After the second cycle, efficiency of charge/discharge MCMB was about 98%. These results were similar to the commercial MCMB product.

MCMB (mesocarbon microbeads) has been synthesized from coal tar pitch, petroleum pitch and polymer compound generally. But yield of MCMB was low about 20~40 wt% and was not above 50 wt%. Neither MCMB was replaced with natural graphite because of economic performance, refining MCMB, and control of the particle size distribution. This study was performed to elevate yield of MCMB and to develop technique of particle size distribution. As the result, yield of MCMB that was synthesized from coal tar pitch increased more than 60 wt% about raw material and particle size of MCMB was restrained according to control of QI (quinoline insoluble) ingredient in raw pitch, heat treatment temperature and time.

Liquid-phase methanol synthesis via methyl formate using coal-derived syngas was carried out in a bench-scale(diameter 173 mm and dispersion height 1200 mm) slurry bubble column reactor(SBCR) Under the condition of 180˚. 61 atm, 30 L/min, H2/CO=2 and a slurry mixture of 2 kg of copper chromite and 0.5 kg of KOCH3 suspended in 14 L of methanol, the per pass conversions of syngas is 6 %, maximum concentration of methyl formate 3.088 mol% and maximum synthesis, rate of methanol 0.8 gmole/kg · hr. It is a significant evidence that copper chromite powder as heterogeneous catalyst didn't active for the hydrogenolysis of methyl formate to methanol, resulting copper chromite powder was not efficiently suspended in a slurry mixture. To enhance the hydrogenolysis of methyl formate in liquid-phase methanol synthesis process, the designed SBCR have need to use the higher specific gravity solvent and/or decrease the catalyst particle size.

Quinoline insoluble formed by the heat treatment was hot-pressed near its softening point. The green body was stabilized in the temperature range of 300~400℃ and subsequently carbonized below 1300℃ in an argon atmosphere. The behaviors of QI formation was examined with varying the heat treatment temperature and the lapse of time of the sample carbonized at various temperatures. And the mechanical property, corrosion resistance, and friction behavior were also measured optimum content of mesophase pitch ensured a dense structure and high LC(002) value, which resulted in high mechanical properties, good corrosion resistance, and low-stable friction behavior.