Cobalt tetraphenylporphyrin-benzylimidazole (CoTpp-BIm)을 산소 운반체로 이용하여 polyethersulfone (PES)와의 혼합물을 기반으로 하는 혼합 구조의 평판형 분리막의 기체 분리 성능을 조사하였다. CoTpp-BIm이 혼합된 PES막은 손가락 구조와 스폰지형 구조가 혼합된 비대칭 구조를 가졌고, 상부표면은 치밀한 형태를 보였다. 기체분리 성능 실험은 94%의 N2 기체에 6%의 O2가 혼합된 기체를 사용하여 평가하였다. 산소 및 질소 투과율은 △P가 15~228 cmHg 범위에서 실험하였고, PES막의 투과면은 진공수준으로 유지되었다. CoTpp-BIm이 혼합된 PES막의 산소 투과율은 공급 압력이 감소함에 따라 증가 하였다. 공급 압력이 15 cmHg일 때 산소 투과율(Po2)는 6676 Barrer이었고, O2/N2 선택도(α)는 6.1, 촉진인자(F)는 2.39까지 증가하였다. 이를 바탕으로 PES막에 CoTpp-BIm을 첨가하면 산소분리 특성이 향상되는 것을 확인하였다.

본 연구는 돼지의 정자와 난소내 과립막세포에서 bisphenol S(BPS)가 생존성과 활성산소 생산에 미치는 영향을 알아보고자 연구하였다. 돼지정액은 0, 5μM BPS를 처리하여 3, 6시간동안 배양하였다. 정자의 생존성은 SYBR14/PI를 이중 염색하여 분석하였으며, 활성산소의 생산을 측정하였다. 또한, BPS(0, 5, 10, 20μM)를 과립막세포에 처리하여 24, 48, 72시간동안 처리하였다. 처리 후, 세포의 생존율과 활성산소 생산(단, 5μM BPS)을 측정하였다. 그 결과, 돼지에서 정자의 생존율은 BPS에 의해 감소하였고, 활성산소의 생산은 모든 처리시간에서 증가하였다(p<0.05). 또한 과립막세포의 생존은 BPS에 의해 억제되었고, 활성산소는 유의적으로 증가하였다(p<0.05). 이상의 결과를 토대로, BPS의 노출은 정자의 활성과 번식과 관련된 세포에 나쁜 영향을 미칠 것이다.

During a long-term operation of polymer electrolyte membrane fuel cells(PEMFCs), the fuel cell performance may degrade due to severe agglomeration and dissolution of metal nanoparticles in the cathode. To enhance the electrochemical durability of metal catalysts and to prevent the particle agglomeration in PEMFC operation, this paper proposes a hybrid catalyst structure composed of PtCo alloy nanoparticles encapsulated by porous carbon layers. In the hybrid catalyst structure, the dissolution and migration of PtCo nanoparticles can be effectively prevented by protective carbon shells. In addition, O2 can properly penetrate the porous carbon layers and react on the active Pt surface, which ensures high catalytic activity for the oxygen reduction reaction. Although the hybrid catalyst has a much smaller active surface area due to the carbon encapsulation compared to a commercial Pt catalyst without a carbon layer, it has a much higher specific activity and significantly improved durability than the Pt catalyst. Therefore, it is expected that the designed hybrid catalyst concept will provide an interesting strategy for development of high-performance fuel cell catalysts.

The design of non-precious electrocatalysts with low-cost, good stability, and an improved oxygen reduction reaction(ORR) to replace the platinium-based electrocatalyst is significant for application of fuel cells and metal-air batteries with high energy density. In this study, we synthesize iron-carbide(Fe3C) embedded nitrogen(N) doped carbon nanofiber(CNF) as electrocatalysts for ORRs using electrospinning, precursor deposition, and carbonization. To optimize electrochemical performance, we study the three stages according to different amounts of iron precursor. Among them, Fe3C-embedded N doped CNF-1 exhibits the most improved electrochemical performance with a high onset potential of −0.18 V, a high E1/2 of −0.29 V, and a nearly four-electron pathway (n = 3.77). In addition, Fe3C-embedded N doped CNF-1 displays exellent long-term stabillity with the lowest ΔE1/2= 8 mV compared to the other electrocatalysts. The improved electrochemical properties are attributed to synergestic effect of N-doping and well-dispersed iron carbide embedded in CNF. Consequently, Fe3C-embedded N doped CNF is a promising candidate for non-precious electrocatalysts for high-performance ORRs.

In anion exchange membrane fuel cells, Pd nanoparticles are extensively studied as promising non-Pt catalysts due to their electronic structure similar to Pt. In this study, to fabricate Pd nanoparticles well dispersed on carbon support materials, we propose a synthetic strategy using mixed organic ligands with different chemical structures and functions. Simultaneously to control the Pd particle size and dispersion, a ligand mixture composed of oleylamine(OA) and trioctylphosphine(TOP) is utilized during thermal decomposition of Pd precursors. In the ligand mixture, OA serves mainly as a reducing agent rather than a stabilizer since TOP, which has a bulky structure, more strongly interacts with the Pd metal surface as a stabilizer compared to OA. The specific roles of OA and TOP in the Pd nanoparticle synthesis are studied according to the mixture composition, and the oxygen reduction reaction(ORR) activity and durability of highly-dispersed Pd nanocatalysts with different particles sizes are investigated. The results of this study confirm that the Pd nanocatalyst with large particles has high durability compared to the nanocatalyst with small Pd nanoparticles during the accelerated degradation tests although they initially indicated similar ORR performance.

높은 산소 분리 특성과 CO₂에 대한 안정성을 보인 LSTF가 코팅된 BSCF 분리막을 bench 규모의 장치에 적용하여 산소 투과 실험을 수행 하였다. 그 결과 실험실 장치에서 측정한 산소 투과율과 다른 결과를 보였다. 이와 같은 산소 투과율의 변화를 XRD와 SEM/EDS를 통해 분석 하였다. 또한 실험실 규모 장치와 bench 규모 장치의 분리막 반응기 내 온도 구배에 따라서 분리막을 3영역으로 나누어 각각 비교 분석하였다.

Microbubbles oxygen transfer to water was simulated based on experimental results obtained from the bubbles generation operated under varying liquid supply velocity to the multi-step orifices of the generator. It had been known that liquid supply velocity and bubble size are inversely related. In the oxygen transfer, a non-steady state was assumed and the pseudo stagnation caused the slow movement of bubbles from the bottom to the water surface. Two parameters were considered for the simulation: They represent a factor to correct the pseudo stagnation state and a scale which represented the amount of bubbles in supply versus time. The sum of absolute error determined by fitting regression to the experimental results was comparable to that of the American Society of Civil Engineers (ASCE) model, which is based on concentration differential as the driving force. Hence, considering the bubbles formation factors, the simulation process has the potential to be easily used for applications by introducing two parameters in the assumptions. Compared with the ASCE model, the simulation method reproduced the experimental results well by detailed conditions.

본 연구에서는 우리나라의 주요하천인 한강, 금강, 영산강, 섬진강 그리고 낙동강의 하구에서 해수중 화학적산소요구량(COD)의 농도를 결정하는 주요 요인과 수질인자에 대해 고찰하였다. 주성분분석으로 얻어진 해수중 COD 농도를 결정하는 주요요인은 염분과 클로로필-a를 중심으로 한 외래성 기원과 자생공급으로 나타났으며, 그 외 해저 퇴적층의 유기물도 영향을 미치는 것으로 나타났다. 하구해역의 COD 농도를 결정하는 수질인자들의 기여도는 회귀식 기울기를 통해 평가하였다. 조사시기별로는 전체적으로 염분의 영향을 많이 받는 것으로 나타났으며, 4월과 8월에는 클로로필-a의 영향도 함께 받는 것으로 나타났다. 하구별로는 낙동강에서는 클로로필-a, 한강과 영산강에서는 염분, 금강에서는 염분과 함께 클로로필-a의 기여도가 각각 큰 것으로 나타났으며, 섬진강에서는 염분과 클로로필-a 모두 낮은 기여를 나타내었다.

This study investigates the microstructure and wear properties of cermet (ceramic + metal) coating materials manufactured using high velocity oxygen fuel (HVOF) process. Three types of HVOF coating layers are formed by depositing WC-12Co, WC-20Cr-7Ni, and Cr3C2-20NiCr (wt.%) powders on S45C steel substrate. The porosities of the coating layers are 1 ± 0.5% for all three specimens. Microstructural analysis confirms the formation of second carbide phases of W2C, Co6W6C, and Cr7C3 owing to decarburizing of WC phases on WC-based coating layers. In the case of WC-12Co coating, which has a high ratio of W2C phase with high brittleness, the interface property between the carbide and the metal binder slightly decreases. In the Cr3C2-20CrNi coating layer, decarburizing almost does not occur, but fine cavities exist between the splats. The wear loss occurs in the descending order of Cr3C2-20NiCr, WC-12Co, and WC-20Cr-7Ni, where WC-20Cr-7Ni achieves the highest wear resistance property. It can be inferred that the ratio of the carbide and the binding properties between carbide–binder and binder–binder in a cermet coating material manufactured with HVOF as the primary factors determine the wear properties of the cermet coating material.

본 연구는 적작약 꽃 추출물의 활성산소 억제와 항염증 및 MMP-1 발현 억제능 효과에 관해 알아보고 기능성 화장품 소재로써의 가능성을 확인하고자 하였다. 본 실험 방법으로는 세포 내 ROS 측정을 통한 활성산소 억제효과와 세포 독성 평가 및 항염증 측정, HDF 세포에서의 MMP-1의 발현 억제능 효과를 측정하고자 하였다. 실험 결과, RAW 264.7 세포와 HDF 세포 내에서 ROS로 억제효과를 확인하였고, 세포 독성평가는 적작약 꽃 추출물 5, 10 μg/mL 처리 농도에서 90% 이상의 세포 생존율, 그 외 처리 농도에서는 80% 이상의 세포 생존율을 확인하였다. 또한 RAW 264.7 세포에서의 NO 생성 억제와 HDF 세포에서 MMP-1의 발현 억제능이 유의하게 억제되는 것을 확인하였다. 이상의 결과를 종합하면, 적작약 꽃 추출물의 세포 내 ROS 생성억제와 NO 생성 억제로 항산화와 항염증 효과, 피부세포에 대한 낮은 독성, MMP-1의 발현 억제를 통한 노화 효과가 확인됨에 따라 기능성 화장품 소재로써의 활용 가능성을 확인할 수 있었다.

Needle-like NiO protecting layers on NiCrAl alloy foam, used as support for hydrogen production, are introduced through electroplated Ni and subsequent microwave annealing. To improve the stability of the NiCrAl alloy foam, oxygen concentration of microwave annealing to form a needle-like NiO layer with good chemical stability and corrosion resistance is controlled in a range of 20 and 50 %. As the oxygen concentration increases to 50 %, needle-like NiO forms a dense coating layer on the NiCrAl alloy foam; this layer formation can be attributed to accelerated growth of the (200) plane. In addition, the increased oxygen concentration causes increased NiO/Ni ratio of the resultant coating layer on NiCrAl alloy foam due to improved rate of the oxidation reaction. As a result, the introduction of dense needle-like NiO layers formed at 50 % oxygen concentration improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the electrolyte and the foam. Thus, needle-like NiO can be proposed as a superb protecting layer to improve the chemical stability of NiCrAl alloy form.

이온전도성 분리막을 이용한 산소 제조 기술은 효율적으로 산소를 제조할 수 있으며, 산소부화 연소기술, 순산소 연소기술 등에 적용 범위가 넓다. 고온에서 운전하는 특성상 열적, 화학적으로 안정적이어야 하며, 특히 이산화탄소 재순환기술을 적용하기 위해서는 이산화탄소 내성이 필수적이다. 본 연구에서는 높은 투과성능을 가지는 Ba0.5Sr0.5Co0.8Fe0.2O3-δ를 상전이 및 소결법으로 중공사막을 제조하였으며 표면을 페롭스카이트-플로라이트 이중상 물질로 개질하여 이산화탄소 내성을 갖도록 하였다. 제조한 분리막을 산소 분리 모듈에 적용하여 부피당 면적에 따른 투과도 및 산소 유량 변화를 관찰하였다.

Nitrogen (N)-doped protein-based carbon as platinum (Pt) catalyst supports from tofu for oxygen reduction reactions are synthesized using a carbonization and reduction method. We successfully prepare 5 wt% Pt@N-doped protein-based carbon, 10 wt% Pt@N-doped protein-based carbon, and 20 wt% Pt@N-doped protein-based carbon. The morphology and structure of the samples are characterized by field emission scanning electron microscopy and transmission electron micro scopy, and crystllinities and chemical bonding are identified using X-ray diffraction and X-ray photoelectron spectroscopy. The oxygen reduction reaction are measured using a linear sweep voltammogram and cyclic voltammetry. Among the samples, 10 wt% Pt@N-doped protein-based carbon exhibits exellent electrochemical performance with a high onset potential of 0.62 V, a high E1/2 of 0.55 V, and a low ΔE1/2= 0.32 mV. Specifically, as compared to the commercial Pt/C, the 10 wt% Pt@N-doped proteinbased carbon had a similar oxygen reduction reaction perfomance and improved electrochemical stability.

The present study was aimed to determine the effects of green tea extract (GTE) and beta-mercaptoethanol (β-ME) supplementation in boar sperm freezing extender on in vitro fertilization (IVF) and reactive oxygen species (ROS) and glutathione (GSH) levels of presumptive zygotes (PZs). Experimental groups were allocated into lactose egg yolk (LEY) without antioxidant (control), GTE (1,000 mg/l in LEY) and β-ME (50 μM in LEY). In freezing, spermatozoa extended with LEY were cooled to 5°C for 3 h and then kept at 5°C for 30 min following dilution with LEY containing 9% glycerol and 1.5% Equex STM. The final sperm concentration was 1 × 108/ml. Spermatozoa were loaded into straws and frozen in nitrogen vapor for 20 min. For IVF, oocytes were matured in NCSU-23 medium and co-cultured with spermatozoa following thawing at 37°C for 25 sec. At 12 h following IVF, IVF parameters (sperm penetration and monospermy) were evaluated. In addition, GSH and ROS levels of PZs were determined by Cell Tracker Blue CMF2HC and DCHFDA, respectively. IVF parameters did not show any significant difference among the experimental groups. GSH and ROS levels of PZs were not significantly different between groups. In conclusion, antioxidant supplementation in boar sperm freezing could not influence IVF parameters, ROS and GSH levels of PZs.

Adhesive capsulitis of the shoulder is a common cause of pain that occurs during shoulder movement, thereby restricting shoulder rotation in clinical practice. Although most patients respond to pain relief treatment (NSAID or corticosteroids) by improving their range of motion, it remains poorly understood without any definitive treatment algorithm. In addition to immune cells, synoviocytes, chondrocytes and osteoblasts in the joint are known to produce pro-inflammatory mediators such as reactive oxygen species (ROS), inflammatory cytokines and lipid mediators, presumably contributing to the pathogenesis of osteoarthritis (OA) and adhesive capsulitis. Although inflammation and also fibrosis are proposed to be the basic pathological changes of a frozen shoulder, there is a lack of information regarding the downstream targets of the pro-inflammatory ROS signaling pathway in the synoviocytes and also how these ROS targets are modulated at the transcription level by a corticosteroid - dexamethasone. In this study, we used human fibroblast like synoviocytes (HFLS) to characterize the signaling targets of ROS by employing a human DNA microarray tool and studied the role of dexamethasone in this process. Our data suggest that several genes such as FOS, FOSB and NFkBIZ, which are known to be involved in pro- or anti- inflammation response, are modulated at the transcription level by ROS and dexamethasone.

Nitrogen (N) loading from domestic, agricultural and industrial sources can lead to excessive growth of macrophytes or phytoplankton in aquatic environment. Many studies have used stable isotope ratios to identify anthropogenic nitrogen in aquatic systems as a useful method for studying nitrogen cycle. In this study to evaluate the precision and accuracy of denitrification bacteria method (Pseudomonas chlororaphis ssp. Aureofaciens (ATCC® 13985)), three reference (IAEA-NO-3 (Potassium nitrate KNO3), USGS34 (Potassium nitrate KNO3), USGS35 (Sodium nitrate KNO3)) were analyzed 5 times repeatedly. Measured the δ15N-NO3 and δ18O-NO3 values of IAEA-NO-3, USGS 34 and USGS35 were δ15N: 4.7±0.1‰ δ18O: 25.6±0.5‰, δ15N: -1.8±0.1‰ δ18O: -27.8±0.4‰, and δ15N: 2.7±0.2‰ δ18O: 57.5±0.7‰, respectively, which are within recommended values of analytical uncertainties. Also, we investigated isotope values of potential nitrogen source (soil, synthetic fertilizer and organic-animal manures) and temporal patterns of δ15N-NO3 and δ18O-NO3 values in river samples during from May to December. δ15N-NO3 and δ18O-NO3 values are enriched in December suggesting that organic-animal manures should be one of the main N sources in those areas. The current study clarifies the reliability of denitrification bacteria method and the usefulness of stable isotopic techniques to trace the anthropogenic nitrogen source in freshwater ecosystem.

Purpose: This study investigated the effect of DPDMS on the oxygen permeability of contact lenses. Methods: The functional silicone monomers MPDMS [poly (dimethylsiloxane) methacrylate modified] were used and the hydrophilic monomers amino substituted methacrylate and HEMA (2-Hydroxyethyl methacrylate) were polymerized in proportions. Results: Oxgen transmissibility was measured in the range of 8.158 to 20.389 x 10-9 (cm/sec)( mlO2/ml x mmHg), and the oxygen permeability was measured in the range of 37.511 to 75.691 x 10-11(cm2/sec)(mlO2/ml x mmHg). As the addition ratio of MPDMS increased, the oxygen permeability increased. Conclusions: MPDMS is considered to be useful as a highly oxygen permeable contact lens material.