The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

The study on ice thermal storage system is to improve total system performance in actual air-conditioning facilities. To obtain the high charging and discharging efficiency in ice thermal storage system, the improvement of thermal stratification is essential, therefore the process flow must be piston flow in the cylindrical type. In the charging process, in case of inlet flow rate the thermal stratification has a tendency to be improved with the lower flow rate and smaller temperature gradient. The experimental results are as follows. (1) In case of Thermal storage, the stable stratification is formed with 2LPM and 4LPM after τ=0.5 and the temperature of inlet brine rises. therefore because of the heat conduction effect of Ice Ball and delay of inflowing water mixing, the heat flow keeps stably till τ＝1.5. (2) In case that the flow directions inside the thermal storage tank are the upward flow in charging and the downward in discharging, thermal stratification is improved because the thermocline thickness is maintained thin and the degree of stratification increases respectively.

The finite element stress analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B　6283) established from the Korean Standards Association. The changed water capacity due to the size of reservoirs could be heavily dependent for evaluating seismic effects, especially for large reservoirs. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS ADPL module. The numerical results obtained for different load cases mainly show the effect of the interactions between the different load combination and other various parameters, for example, the water capacity, and different stainless steel materials. The structural performance for various load combinations is also evaluated.

The study on ice thermal storage system is to improve total system performance in actual air-conditioning facilities. This paper deals with experimental research to observe the characteristics of heat flow and the effect of ice thermal storage in case of three sizes of ice ball, which are included identification of ice thermal extraction. Diameters of three ice ball was 103mm, 96mm, and 76mm is equivalent to 0.45, 0.50 and 0.55 in porosity respectively. Also inlet geometric parameters are the perforator and distributor. Flow rate of brine were 2LPM, 4LPM and 6LPM and the temperature difference in dynamic parameter are 8℃, 10℃ and 12℃. Flow rate of brine used the liter per minute(LPM) for liquid measurement applications. The effect of brine flow rate on efficiency increased as the temperature difference and porosity increased. An adaption of a long-term storage in case of smaller porosity(ɛ=0.45) was available through experiments of outlet temperature responses.

In this study, center marking process is numerically analyzed to investigate the characteristics of deformation of aluminium alloy bracket by the pin load. The proper size of groove which are required for marking system and the pressure of cylinder are predicted through the analyse of stress and strain fields of the plate. The results of this study show that von Mises stress is a maximum when the maximum of reaction force.

본 논문에서는 소스 코드가 공개된 라이브러리를 이용하여 선박의 성능을 예측할 수 있는 해석 코드를 개발하였다. 질량보존 방정식, 모멘튼 보존방정식, 난류를 고려하기 위해 난류모델과 벽함수를 고려하였다. 자유수면 계산을 위해 볼륨비 수송방정식을 고려하였고, 자유수면의 정확도 높은 계산을 위해 고차 도식을 포함하는 라이브러리를 개발하였다. 개발한 프로그램을 컨테이너선인 KCS에 적용한 결과 실험에서 포착된 자유수면 분포를 잘 예측하였다. 자항성능 평가 시 추진기 회전을 위해 GGI 라이브러리를 사용하였다. 계산결과 실험과 비교해 약 7 % 정도의 정확도로 자항성능을 예측하였다. 캐비테이션 예측을 위해 이상 균질 모델을 포함하는 새로운 라이브러리를 개발하였다. 이상 균질 모델을 추진기에 적용한 결과 일반적으로 발생하는 얇은 층 캐비테이션을 잘 예측하는 것을 확인하였다. 오픈 소스 라이브러리를 이용하여 개발한 수치수조를 KCS에 적용한 결과 오픈 소스 라이브러리에 대한 가능성을 확인하였다.

해상에서의 통신 환경이 개선되면서, 온라인 기반의 응용 소프트웨어에 대한 개발의 필요성이 고조되고 있다. 특히 전자해도는 해상온라인 애플리케이션에서 중심적 위치를 차지하고 있다. 본 연구에서는 중소형 선박을 위한 스트리밍 전자해도 개발에 필요한 관련 기술을 도출하고, 국내외 개발 과정과 동향을 파악하고자 했다. 지리정보시스템을 이끌고 있는 두 기관, OGC와 OSGeo의 수행 프로젝트, Ajax 기법, 메르카토르 도법과 전자해도 기술 일반을 검토…

Openplus have proposed a socially sustainable architecture and programme for Mapo oil reserve tank and its parking lot space. Mapo oil reserve tanks have been abandoned for more than 10 years but they are surrounded by beautiful nature and located in the state-of-the-art city, Mapo of Seoul. Instead of filling the space with programme and construction, Openplus proposed an art MADANG (open space) and art TANKs that will be filled and developed by local artists by leaving the site half empty. Instead, transformed topography and laid-out “service pole” was proposed as infrastructure to enable various size and shape of artist studios at Madang, and “service ring” was proposed as supporting space to enable tank to contain flexible programme in Tanks. Mapo Art Madang, Mapo Art Tank will be built by user themselves amd will build its unique character over time.

우이산호와 같이 특수 해양시설물인 유류터미널과 선박 간의 해양사고는 대규모 해양오염 발생으로 이어져 해당 기업에 심각한 손실을 끼치며 대형 환경오염을 수반한다. 본 연구는 대상선박을 실시간 모니터링하고 사고위험을 사전에 식별하여 항만시설물을 포함한 단계별 비상 대응이 가능한 유류부두 안전관리 종합정보시스템 개발을 제안한다. 해당 시스템은 선체, 선박운항자 및 유류터미널 시설물까지 유기적으로 통합된 능동적인 안전감시시스템으로 해상교통 모니터링과..

A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The porosity and heat transfer coefficient of filler material as well as inlet velocity of heat transfer fluid are selected as simulation parameters. The porosity is varied as 0.2, 0.5, and 0.8 to account for the effect of filler granule geometry. Two levels of the heat transfer coefficient is adopted to assess the heat transfer between heat transfer fluid and filler material. The inlet velocity is varied as 0.00278, 0.0278, and 0.278m/s. As both of the porosity and the heat transfer coefficient increase, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As the inlet velocity increases, the penetration depth of the heat transfer fluid increases proportionally.

Since 2003, policies and practices related to the reduction of CO2 gas emission from ships has been discussing by the International Maritime Organization. The representative emission index and indicator are the EEDI (Energy Efficiency Design Index) for the new ships and EEOI (Energy Efficiency Operational Indicator) during the voyage. In this paper a water tank test and procedure development are introduced for the purpose of improving EEDI. The results showed good agreement explaining the characteristics properly.

A 2D axisymmetric numerical analysis was performed to study the characteristics of charge process inside solar thermal storage tank. The interfacial area density and inertial resistance of filler material are selected as simulation parameters. The interfacial area density is varied as 800, 2000, and 4000 1/m. The inertial resistance is varied as 1, 3, and 5 1/m. When the interfacial area density increases from 800 to 4000 1/m, the discrepancy of the temperature distributions between the filler and heat transfer fluid decreases. As inertial resistance increases from 1 to 5, both of the temperature and fluid flow pattern changes considerably.

이 연구의 목적은 축소된 탱크 모델에서 측정되어진 슬로싱 압력을 이용하여 실제 크기의 탱크 모델에서의 압력을 예측하는 것이며, 또한 예측된 압력으로 LNG 코너 블럭의 슬로싱 하중에 의한 구조 강도를 평가하는 것이다. 이 목적을 위하여, Ansys CFX 프로그램을 이용하여 138K급 LNG 화물창 시스템의 크기 비율에 따른 슬로싱 해석을 수행 하였으며, 크기 비율에 따른 슬로싱 평균 압력 및 최대 피크 압력을 측정하였다. 또한, 측정된 압력은 프루드 법칙에 의해 실제 138K 크기의 압력으로 변환하여 실선 크기의 KC-1 코너블럭에 대한 구조강도 평가를 수행하였다.

In this study, an externally reinforced structural system for SMC(Sheet Molding Compound) panel water tank, designed according to the Japanese design code, is experimented to evaluate its seismic performance. The test tank is 3m long, 2m wide and 3m high, considering the capacity and size of the shaking table. The measured hydrodynamic pressures are found to be approximately 70% of the Japanese design code values. It may be partially due to the convex shape effect of the unit panels. The analytical results of externally reinforced system based on the measured dynamic water pressures are found in good agreement with the test results. If the design hydrodynamic pressures are estimated properly, the proposed analytical model for the externally reinforced water tank becomes a useful design tool and the Japanese design code is found to provide a safe design for the external frames of SMC panel water tank.

The present study has measured the velocity distribution in a three-dimensional shape model of the rectangular settling tank using PIV system. The experiment system consists of hi-speed camera, laser and host computer. Reynolds number based on the guide wall height(H=25mm) has been applied during the whole experiments. The results showed that recirculation flow in settling tank exists and a internal flow weakly influenced by Reynolds number at Re=5×103 greater.