본 논문의 1편에서는 레저선박의 실시간 선체구조모니터링시스템을 개발하기 위하여 도파로 어레이격자(AWG, Arrayed Waveguide Grating)와 광섬유 브래그격자센서(FBG, Fiber-optic Bragg Grating)를 이용한 선체구조모니터링시스템의 설계 및 적용 가능성을 검토하였다. 본 연구에서는 레저선박의 구조취약부의 실시간 모니터링을 위하여 광섬유센서 데이터의 측정 및 분석을 고속으로 처리할 수 있도록 시스템을 최적화하였으며, 레저선박의 선체구조안전모니터링을 위하여 레저선박의 선체 주재료인 FRP와 알루미늄 시편을 대상으로 재료 특성에 대한 기 초 데이터베이스를 구축하였다. 30feet 및 60feet급 세일요트의 알루미늄 마스트에 개발된 시스템을 적용하여 하중변화에 따른 변형률 특성 확인 및 레저선박의 선체구조안전성 평가를 위한 기초 연구를 수행하였다.

선박의 건조 공정 중 병목공정에 해당하며 전적으로 숙련자의 수작업으로만 이루어지는 공정이 곡가공 공정이다. 이러한 곡가공 공정을 자동화 하고자 산업계와 학계의 많은 노력이 경주되었다. 기존의 곡가공 자동화 시스템 개발은 산업계와 학계에서 오랜 동안 연구되어 왔음에도 불구하고 실제로 생산현장에 투입되어 성공적으로 운영되는 사례는 없었다. 본 연구는 이러한 기존 곡가공 자동화 시스템 개발의 문제점을 파악하고 이를 해결할 수 있는 대안으로 요구사항 정의, 시스템 설계, 하부시스템 및 구성요소의 구현, 시스템 통합 및 검증의 4단계 시스템 엔지니어링 기반의 시스템 개발방법론을 제안하였다. 제안된 개발방법론을 기반으로 선체 곡가공 자동화 시스템 프로토타입 개발에 적용하고 결과를 고찰하여 기존 곡가공 자동화 시스템 개발에서의 문제점을 해결할 수 있는 대안이 될 수 있음을 확인하였다.

주5일제 정착, 소득의 향상, 연안지역 접근성 개선으로 해양관광 활동에 대한 관심과 해양레저 활동에 대한 수요가 증가하고 있으나, 해양활동을 위한 인프라구축 및 레저선박과 인명의 안전을 위한 시스템개발은 미비한 실정이다. 일반선박과 달리 레저선박은 구조안전성 평가 시스템을 위한 규정 및 적용 기준이 명확히 정립되어 있지 않으며, 시스템 개발이 전무하여 레저보트의 운항안전성 확보를 위한 레저보트 구조 안전모니터링시스템의 개발이 필요하다. 따라서 본 연구에서는 도파로 어레이 격자(AWG, Arrayed waveguide grating)와 광섬유 브래그 격자 센서(FBG)를 이용하여 레저보트의 실시간 선체구조모니터링이 가능한 시스템을 개발하여 해상에서의 인명과 레저선박의 안전성을 확보하고자 한다.

소득의 향상 및 연안지역 접근성 개선으로 해양관광 활동에 대한 관심증가 및 해양레저에 대한 수요가 증가하고 있으나, 해상에서의 레저선박과 인명의 안전을 위한 시스템 개발은 미비한 실정이다. 레저선박의 경우 구조안전성에 관한 규정 및 적용 기준이 명확히 정립되어있 지 않으며, 안전성 평가를 위한 시스템 개발이 전무하여 레저보트의 운항안전성 확보를 위한 레저보트 구조안전모니터링시스템의 개발이 필요 하다, 본 연구에서는 도파로 어레이 격자(AWG)와 광섬유 브래그 격자센서(FBG)를 이용하여 레저보트의 실시간 구조안전모니터링 가능한 시스 템을 개발하여 해상에서의 인명과 레저보트의 안전성을 확보하고자 한다.

The small catamaran leisure boat which is 4.1m length, 1.9m breadth and 0.7 ton displacement was designed. To decide optimum breadth, four sets of distances between hulls were considered. CFD analysis using FLUENT was performed to examine flow patterns, pressure distribution and wave height between two hulls. Model test at CWC in INHA Technical College was also carried out to get the resistance for final hull form at design speed 5 knots. The feature of flow pattern among four different distances between hulls were compared and discussed. The optimum breadth of design vessel was decided depending on the CFD results and comments of expertise that has experience on board the small demihull. The design procedure to choose optimum breadth, especially small change of the hull distance, using CFD was described in this paper

To fulfill the design requirement from the Algeria owner, Hull form development of a trawl fishing boat was performed. Model test at CWC in INHA Technical collage was carried out to investigate the resistance characteristics and CFD analysis using FLUENT was performed to examine flow patterns and pressure distribution around hull etc. The designed hull form satisfies speed-power requirement of 10.5 knots at installed power. This paper describes the design feature of trawl fishing boat and evaluates the model test results and CFD results. The design constraints for Algeria trawl fishing boat were explained and the speed of the ship was compared with sea trial results.

To compare and evaluate the suitability and comfort levels of the environment on board a stern trawl training ship, KAYA(GT: 1737 tons, Pukyong National University), with the international standardization guide ISO 6954:2000(E), measurements of the hull vibration on accommodation areas and working areas of the training ship from July 8 to July 10, 2008 were completed upon KAYA's linear sea route. The vibrations along the z-axis were measured with the use of a 3-axis vibration level meter, which included a marine vibration card. Results show accelerations of the vibrations on the passenger's accommodation area to be 42.0-115.8(average: 78.0, standard deviation(SD): 21.0) mm/s2, which is largely below the permissible upper limit, but 75 % of the observation points exceeded the permissible lower limit of 71.5 mm/s2, indicating a comfortable environment. The accelerations of the vibration in a frequency of 10-24Hz lowering the visual performance were measured at 2.5-12.0(average: 7.6, SD: 3.1) mm/s2. The crew s accommodation area experienced vibration accelerations of 42.9-82.3(average: 93.1, SD: 53.1) mm/s2, which is generally below the permissible upper limit of 214.0 mm/s2, and 62.5% of the observation points did not exceed the permissible lower limit of 107.0 mm/s2, denoting a level of comfort. The acceleration of the vibration in a frequency of 10-24Hz were 4.7-28.3(average: 12.4, SD: 8.8) mm/s2. On the crew s working area the accelerations were measured at 86.9-153.9(average 119.3, SD 18.0) mm/s2. These values were generally below the permissible upper limit of 286.0 mm/s2 and only 12.5% of the observation points did not exceed the permissible lower limit of 143.0 mm/s2, the level at which a high level of comfort is maintained. The accelerations in frequency of 10-24Hz and 30Hz were 9.1-29.8 (average 13.8, SD= 4.5) mm/s2 and 8.9-13.7 (average 11.8, SD 2.1) mm/s2, respectively. In conclusion the boarding environment of the training ship was good in general although an improvement of the vibration condition partially needed on the crew s accommodation area near the engine room.

Recently a modern style sailing boat suitable for Korean sea was designed through full three dimensional design skill by the authors. In this paper, based on this three dimensional hull and deck design, a production process of 31ft class cruiser sailing boat was developed. First of all, it was possible to make the digital mock-up for design boat. Through this mock-up and RP(rapid prototyping) modeling, an appropriate general arrangement of design boat was able to be determined at final. And also the female deck mould was able to be made by a 5-axis NC cutting machine. By doing this method, more higher efficiency and precision for sailing boat production could be achieved than before. Through this research the total process of design and construction for the designed boat was established.

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

The initial hull form having a 3 gross tonnage and 30 knots class high speed leisure boat is newly developed based on a statistical analysis method. Fluid dynamics characteristics are studied by commercial CFD code, FLUENT. The effect of a fin attached on the hull side is investigated together. It can be found that the fin plays a role of increasing the resistance performan

검정콩 종피를 첨가하여 제조한 두부의 품질특성을 검토하였다. 황색콩과 검정콩 전체를 분쇄하여 가공한 두부의 수득량과 두부순물의 수득량은 거의 동일한 양상을 나타내었으나, 0.5% 및 5%의 검정콩 껍질을 첨가하여 두부를 제조한 경우 첨가된 껍질로 인해 황색 및 검정 두부에 비해 두부의 수득량이 뚜렷이 증가하였다. 특히, 5% 검정콩 껍질의 첨가 시에 황색과 검정 두부에 비해 1/2수준의 두부순물이 감소하였다. 두부의 물성검사에서는 검정콩 종피를 5% 첨가한 두부에서 응집성, 점착성, 씹힘성이 높은 양상을 나타내었으며, 황색콩과 0.5% 검정콩 껍질 첨가 두부 간의 물성을 비교한 결과는 점착성과 씹힘성에서 유의적인 차이가 나타나지 않았다. 이는 기존 두부의 가공비율 대비 0.5% 수준으로 검정콩 종피를 첨가하여도 가공된 두부의 견고성과 씹힘성에는 영향을 미치지 않는다는 결과를 추정할 수 있다. 또한 관능평가에서는 조직감(texture), 견고성(firmness)에서는 황색콩, 검정콩, 0.5% 검정콩 껍질 첨가 및 5% 검정콩 껍질 첨가 두부 간에 유의적인 차이가 나타나지 않았다. 두부 특유의 고소한 맛은 0.5% 검정콩 껍질을 첨가한 두부에서 가장 좋은 풍미를 나타내었으며, 5%검정콩 껍질 첨가 두부에서 가장 낮았다. 두부 저장기간에 따른 일반 세균수와 진균수를 측정한 결과는 5% 검정콩 껍질 첨가 두부에서 황색콩, 검정콩, 0.5% 검정콩 껍질 첨가 두부에 비해 균의 증가가 억제되는 양상을 보였다.

A series of model tests carried out at the CWC of WJFEL for the purpose of prediction of resistance for the performance and improvement of resistance by attaching appendage for the ship of 50 knots class planing hull. The resistance performance evaluation has been carried out for the bare hull and for the appendage hull with two different depth of vertical type wedges. In the bare model test, trim and sinkage is calculated for the planing hull and the resistance is calculated. For minimizing the resistance, wedge appendage is attached and tested. Analysis and tests shows that for a 12.5mm wedge, resistance is minimum and overall power tallied to 5636ps.

본 논문에서는 펌프 노즐이 부착된 잠수 선형의 유동에 관해 수치해석 결과를 보여준다. 이는 속도분포, 양력계수, 영각의 값을 갖는 펌프젯 노즐이 선체와 부착되었을 때와 부착되지 않았을 때의 종강도 모멘트 등의 값들을 계산한다. 선형의 속도 분포에 따른 노즐의 영향면적과 양력계수(변호의 특성요인) 종강도 모멘트, 영각에 따른 도함수 등을 보여준다.

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.

In this paper a free-form hull design program and performance prediction program for planing boat is introduced. This program enables the designer to do complex geometric hull shape design on a personal computer and accurately to predict power requirements for a given loading and velocity. For a free form design, Bezier curve model is adopted as a basic representation tool of curves and surfaces, and this program has versatile functions to do fairing jobs with a convenient graphical user interface. After creating a hull form the geometric data is provided in a manner compatible with a variety of analysis tools including 'Motion Analysis(by Zarnick)' for prediction of motion characteristics in regular waves, 'Running Attitude (by Savitsky)' for prediction of the running attitude and required power.