본 연구에서는 충격 및 폭발하중에 대한 콘크리트 구조물의 파괴 및 구조거동을 정확히 예측할 수 있는 콘크리트 재료모델인 최신 Microplane model을 개발하고, 콘크리트의 분쇄효과를 도입한 재료모델을 기존 상용 hydrocode에 탑재한 정밀 해석기법을 개발하고, 콘크리트 슬래브의 충돌해석을 수행하고, 그 우수성을 검증하였다.

아스팔트 콘크리트(AC) 궤도는 열차 하중에 의한 궤도 하부노반의 발생응력을 최소화하고, 적외선에 민감한 AC의 노출면적을 감소시켜 온도 영향에 따른 AC 도상의 소성변형을 줄일 수 있는 슬래브 패널 개발이 매우 중요하다. 본 연구에서는 형상 설계 및 실내성능시험을 통해 AC 궤도용 슬래브 패널을 개발하였으며, KRL-2012 표준열차하중 모델 및 KR-C코드에 의한 다양한 정적 하중조합에 따른 슬래브 패널에 작용하는 휨 인장응력 및 설계모멘트를 유한요소해석을 통해 구조 안전성을 검토하였다. 또한 AC 궤도용 슬래브 패널의 설계 적합성을 검증하기 위하여, EN 13230-2에 의거 슬래브 패널 주요 위치별로 정적 휨 강도 시험, 동적 휨 강도 시험을 수행하였다. 성능 시험 결과, AC 궤도용 슬래브 패널은 균열 하중 및 균열 확대 여부 등 유럽 표준에서 요구되는 성능 기준을 모두 만족하였다.

This study is part of a study on the maintenance method reflecting characteristics of PSC box girders. The top slab deterioration and damage cases occurred in PSC box girder bridges were investigated and analyzed. Finally, it is aimed to be used as basic reference of maintenance plan establishment.

The stresses occurred in the middle slab at the areas of the emergency passageway in a double-deck tunnel are analyzed when the slab is lifted to replace bearing pads placed between the middle slab and supporting bracket as a maintenance process. The middle slab can be lifted at several different points near the emergency passageway areas and the stresses of the middle slab depend on the lifting points. This study presents the effect of the lifting location of the middle slab on the stress occurrence for the maintenance work of replacing bearing pads under the middle slab near the emergency passageway areas.

The purpose of this study is to understand the structural performance of the specimens beam by changing the depth and width of the U-shaped composite beam. To this end, experimental specimens by changing depth and width as compared with a reference specimen were prepared and tested. As a result of this study, growth of the depth has great effect on the structural performance while a width increase has no significant effect on the structural performance of composite beam.

In this study, an experimental research was conducted to investigate the effective compressive strengths of slab-column connections with different strengths. From the test results, it was found that the effective compressive strengths of the interior columns completely restrained by slab were similar to the compressive strengths of the columns.

Voided Slab is a very efficient system that can reduce weight and its use has increased. In this paper, Shear performance of voided slab 3 type(rc slab, ball slab, ball slab with water) with improved damping performance was evaluated. As a result of the test, the shear performance was not much different from the existing RC slab.

In this study, non-destructive methods were applied to detect cavities behind face-slab of concrete-faced rockfill dam (CFRD). This study reviewed the effectiveness of the field IE, MASW, MIRA shear wave tomography and GPR findings. IR techniques also reviewed as an additional method of exploration to reinforce the proposed methods of exploration. Among previous methods, IE exploration was concluded most appropriate as an efficient way to detect cavity of the CFRD. Nevertheless, additional reinforcement investigation is required because the result of a single exploration is difficult to reduce the uncertainty.

본 논문에서는 노후된 중소규모 RC슬래브 교량에 대한 응답계수를 분석하였다. 이 응답계수는 진동수 기반 교량의 내하력 예측 모델에서 중요한 변수이며, 정적 및 동적 응답계수로 구성되어 있다. 정적 및 동적 응답계수는 교량의 현재와 이전(또는 설계) 상태의 진동수 변화와 충격 계수 변화에 따라 각각 결정된다. 여기서 충격계수 변화는 충격계수 응답스펙트럼에서 교량의 고유진동수에 따라 산출된다. 본 연구에서 고려한 총 4개의 대상교량은 지간길이가 12 m이고 시공 후 30년 이상 된 RC슬래브 노후 교량이다. 진동수 분석을 위해 덤프 트럭을 이용한 현장 동적 재하시험과 설계기반 FE모델을 이용한 고유치 해석을 통해 교량의 현재 및 설계 상태의 고유 진동수를 각각 도출하였다. 충격계수 응답스펙트럼 개발에 있어서 좀 더 현실적인 조건을 반영하기 위해 3축이동하중과 단순지지 및 양단고정 조건을 고려하였다. 분석 결과 응답계수는 0.21에서 0.91까지 광범위하게 분포하였고, 정적 응답계수가 총 응답계수 결과에 크게 기여한 반면 동적 응답계수는 결과에 작은 영향을 미쳤다. 1축 이동하중과 단순지지 조건에서의 응답계수와 비교해 보았을 때 최대 오차는 약 3%미만으로 매우 작게 나타났다.

In this study, the shear strength according to the width of the web was assessed by using the Waste styrofoam as hollow material without reprocessing. The concrete's design strength was set to 24MPa and the web width was 50mm, 100mm, and 150mm as variables. Shear strengths of KCI increased from 111.2% to 203.9%.

The impact factor response spectrum of bridges are generated based on the number of vehicle axles (one and three axles) and their boundary conditions (simply supported and both ends-fixed). In order to investigate the impact factor variation, a RC slab bridge aged over 40 years is considered. The natural frequencies for the current and undamaged initial state are evaluated from field test and FE model, respectively. Considering the natural frequencies and the generated response spectrum, the impact factors for each state are determined. From the result, the impact factor ratio defined the current to initial impact factor are almost same except the one axle and both ends-fixed case.

본 연구는 방음재를 삽입한 새로운 개념의 합성슬래브 시스템을 제안하고, T-형 바의 폭, 전단보강 철근의 설치 등을 실험의 주요변수로 한 총 7개의 실험체를 제작 Push-Down실험방법으로 수행한 수평전단성능에 대한 실험 결과를 제공하고 있다. 실험결과 T-형 바를 전단키로 적용하고 방음재를 삽입한 실험체가 기본실험체에 비해 수평전단성능에서 2배 이상 우수한 것으로 나타났다. 이는 제안한 합성슬래브상세를 실제 현장 적용하여도 기존의 합성슬래브 보다 구조적 측면에서 상당한 안전율을 확보할 것으로 생각되며, 내진동 및 방차음의 개선에도 크게 기여할 것으로 판단된다.

The purpose of this study is to estimate the thickness of concrete slabs using the impact echo method based on the stress waves, which is one of the nondestructive test method, to evaluate the safety and construction conditions of concrete slabs. If the correlation and reliability of the impact echo method and the slab thickness are secured, it can be considered that the quality control of the concrete slab is possible in existing structures and structures under construction.

SFRC slab track specimen was fabricated and tested under flexure according to BS-EN-13230. The track is reinforced only with steel fibers. Reinforced volume ratio was 0.6%Vol. In results, slab track was found to satisfy the required capacity even though there was no ordinary steel rebar.

In this study, concrete slab with insulation and non-insulated formwork was used to monitor and control its strength using a wireless sensor network with equivalent age method. As a result, the temperature and compressive strength of the structures were monitored without any problems, which revealed a good management tool.

In this study examined the strength of wall concrete using insulated molds and non-insulated forms by monitoring the strength of the structure using a wireless sensor network by maturity method. It was confirmed that the temperature and compressive strength of the structures are monitored in real time, along with effective strength control.

This paper presents the influence factors of heat transfer in a voided slab under fire situation. The effects of a void in a slab on heat transfer are presented and the results are quantitatively analyzed for each influence factor. For this purpose, the finite element analysis method was used to evaluate the influence of the heat transfer factors on the thermal characteristics in a voided slab. Based on these results, the influence factors which have significant difference in the temperature spectrum were derived.

In order to simulate the Helmholtz resonator environment, a perforated plate was inserted into a hollow slab to test its vibration performance. The vibration damping ratio was larger in the conventional hollow slab without apertures, however the accelerometer measurement showed a higher vibration reduction effect in the case of the perforated plate.

This research is about design optimization and performance evaluation for composite PC slabs using improved horizontal shear connectors. As a result of the tests, the improved shear connectors show structural performance even when they are placed only in the required section.

기존의 LB-DECK는 레티스바와 현장에서 배근되는 철근과의 간섭이 시공성 등을 저하시키는 문제점이 지적되고 있었다. HB-DECK는 레티스바의 형태를 단순화하고, 방향을 주철근 방향에서 배력근 방향으로 전환하였으며 강성을 증가시키기 위해 하면에 리브를 설치하였다. 본 연구에서는 HB-DECK가 프리캐스트 콘크리트 슬래브로써 성능을 발휘할 수 있는지를 검증하고자 하였다. 이를 위해 도로교설계기준(2015)에 의한 구조검증과 HB-DECK와 현장타설 콘크리트와의 합성거동 분석을 위해 정적재하시험을 수행하였다. 범용구조해석 프로그램인 MIDAS FEA를 이용하여 3차원 유한요소해석을 수행하였으며, 해석결과와 실험결과를 비교분석하였다. 그 결과, HB-DECK는 현장타설 콘크리트와 완전한 합성거동을 하는 것으로 나타났으며, 도로교설계기준(2015)에서 요구하는 구조성능을 만족하는 것으로 나타났다.