역삼투법 해수담수화 기술은 에너지 소모 및 농축수 처리 문제로 인하여 기술 활용의 보급에 제한이 있는 실정이다. 해수·하수를 유도용액과 원수로써 사용하는 정·역삼투 융합공정은 별도의 유도용액이 필요하지 않으며 희석된 해수가 역삼투 공정의 원수로써 사용되기 때문에 일반적인 역삼투법 해수담수화 기술보다 낮은 압력에서 운전된다. 또한 역삼투 공정 후단에 정삼투 공정을 추가시킴으로써 농축수를 희석시킬 수 있으며 이로써 농축수 배출로 인한 문제점을 최소화 시킬 수 있다. 현재 국외에서는 Modern water, Porifera사 주도로 정삼투 모듈 개발 및 실용플랜트 개발이 이루어지고 있으며, 국내의 경우 FOHC 연구단에서 해당 공정의 기본 메커니즘 및 실용화에 관한 연구가 이루어지고 있다.

Membrane-based separations provide significant advantages over the conventional thermally-driven separation process such as distillation since they require small footprints as well as less energy.1[] Polymeric membranes, most widely used for a variety of industrial gas separations, suffer from the limitation of separation performance, so-called the upper-bound limit due to their inherent drawbacks.2[] This presentation will introduce advanced membranes including mixed matrix membranes and ladder-structured polysilsesquioxanes, recently developed in our group to overcome the current limit of the separation performance of polymeric membranes.

고분자의 용이한 가공성과 우수한 투명성, 그리고 합리적인 비용 효율로 인해 식품 포장 산업에서 금속이나 유리용기들을 고분자 기반의 포장 소재들로 대체하려는 경향이 전 세계적으로 널리 퍼지고 있다. Barrier 고분자들은 산소, 이산화탄소, 수증기 등 대기 가스에 대한 낮은 투과성을 나타내고 있어 식품 포장 산업 이용에 유용하다. 이러한 식품 포장 산업의 전반적인 추세와 함께, 산소에 민감한 주스, 착향 음료, 그리고 에너지 음료 등 새로운 식품 산업의 성장으로 인해 고성능의 barrier 특성, 특히 O2와 CO2에 대해 낮은 투과성을 지닌 고분자 포장 소재의 개발이 시급한 상황이다. 기존의 고분자에 기반한 barrier의 성능 향상은 새로운 식품 포장 산업에 급격한 변화를 줄 것이다. 본 총설에서는 (1) antiplasticization을 유도한 barrier 소재들, (2) antiplasticization과 crystallization을 사용한 barrier 성능 상승 효과, (3) 새로운 barrier 고분자들, (4) 나노합성 소재, (5) 혼합 고분자 등과 더불어, 차세대 포장 소재들의 특성 분석을 소개하고자 한다.

With the advances in the imaging techniques, it is now possible to more accurately diagnose and stage pancreatic cancer. However, there is no uniform definition of “borderline resectable pancreatic cancer (BRPC)” and consensus on this terminology has not been reached yet. Although there has been much progress in the therapeutic strategies for pancreatic cancer, the optimal treatment scheme for BRPC is still under debate. In order to overcome these problems, prospective studies using multidisciplinary approaches are warranted. This article is intended to review the currently available definitions and management of BRPC. Promising novel ablative methods that are used as local treatments for locally advanced pancreatic cancer are also introduced. In the near future, these ablative methods might prove to be invaluable for those with BRPC.

This study investigated the effect of a co-culture of Scenedesmus dimorphus and nitrifiers using artificial wastewater on the removal of ammonium, nitrate and phosphate in the advanced treatment. To test the synergistic effect of the co-culture, we compared the co-culture treatment with the cultures using S. dimorphus-only and nitrifiers-only treatment as controls. After 6 days of incubation, nitrate was removed only in the co-culture treatment and total amount of N removal was 1.3 times and 1.6 times higher in the co-culture treatment compared to those in the S. dimorphus- and nitrifiers-only treatments, respectively. In case of total amount of P, co-culture treatment removed 1.2 times and 12 times more P than the S. dimorphus -and nitrifiers-only conditions, respectively. This indicates that the co-culture improved removal rates for ammonium, nitrate, and phosphate. This further implies that there was no need for denitrification of nitrate and luxury uptake of P processes because nitrate and phosphate can be removed from the uptake by S. dimorphus. In addition, co-culture condition maintained high DO above 7 mg/L without artificial aeration, which is enough for nitrification, implying that co-culture has a potential to decrease or remove aeration cost in the wastewater treatment plants.

In this paper. the effects of the aspect ratio on the natural frequency of the advanced composite road structures is studied. The advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. Some laminate orientations have decreasing values of  ,  ,  and  stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. Most of the road structures have large aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms.

본 연구에서는 첨단 함형에 레이더 반사면적 감소기술을 적용하고 특성을 분석하였다. 특히, 레이더 반사면적에 영향을 주는 요소, 레이더 반사면적을 최소화 하는 방안, 표적의 특수 재질 물성에 대한 레이더 반사면적의 변화 영향을 고찰하였다. DDG-1000 type 첨단 함형의 함정 고각별 레이더 반사면적 해석 결과 고각이 10도 높아짐에 따라서 RCS 평균값이 23.91 dBsm 증가하는 것을 확인하였다. 또한, 함정 상부구조물의 경사각이 6도 증가함에 따라서 RCS 평균값이 1.27 dBsm 감소하는 것을 확인하였다. 마지막으로 상부구조물 앞면과 뒷면에 전파흡수체를 부착한 경우 RCS 평균값이 2.27 dBsm 감소 하는 것을 확인하였다.

A 12-year-old spayed female Pomeranian (weighing 2.4 kg) was referred with primary complaints of acute dyspnea, cough, and lethargy. Diagnostic imaging studies found degenerative mitral valve cusps, chordae tendinae rupture, severe mitral regurgitation (5.45 m/s of peak velocity), and marked left atrial and ventricular dilation. The dog was diagnosed as having degenerative mitral valve disease (DMVD) with ISACHC stage IIIa heart failure. Her clinical condition was stabilized after administration of cardiac medication (e.g. diuretics and pimobendan). Ten months later, the dog was referred back to the clinic due to a sudden worsening of clinical signs. Echocardiographic study found pulmonary hypertension in addition to DMVD. After medication was adjusted, clinical signs were stabilized in 2 weeks. The patient was returned after 4 months for cardiac recheck and there was no obvious worsening of clinical signs. Incidental finding of a left-to-right atrial septal defect from rupture of the atrial septum secondary to marked left atrial dilation by DMVD was noted by echocardiography. To diminish left atrial volume overload, the frequencies of both furosemide and pimobendan were increased (i.e. from q 12 hr to q 8 hr) in addition to adding spironolactone (1 mg/kg q 12 hr). Based on diagnostic findings, this case was re-diagnosed as acquired atrial septal defect secondary to rupture of the atrial septum with advanced stage DMVD. The dog was then stabilized and is currently being regularly monitored.

Microalgae is known as one alternative energy source of the fossil fuel with the small size of 5 ~ 50 µm and negative charge. Currently, the cost of microalgae recovery process take a large part, about 20 - 30% of total operating cost. Thus, the microalgae recovery method with low cost is needed. In this study, the optimum current for Scenedesmus dimorphus recovery process using electrocoagulation techniques was investigated. Under the electrical current, Al metal in anode electrode is oxidized to oxidation state of Al3+. In the cathode electrode, the water electrolysis generated OH- which combine with Al3+ to produce Al(OH)3. This hydroxide acts as a coagulant to harvest microalgae.Before applying in 1.5 L capacity electrocoagulation reactor, Scenedesmus dimorphus was cultured in 20 L cylindrical reactor to concentration of 1 OD.The microalgae recovery efficiency of electrocoagulation reactor was evaluated under different current conditions from 0.1 ~ 0.3 A. The results show that, the fastest and highest recovery efficiency were achieved at the current or 0.3 A, which the highest energy efficiency was achieved at 0.15 A.

This study assessed the removal efficiency of NOM which is known as the precursors of DBPs in advanced water treatment using the ceramic membrane filtration, introduced the first in the nation at the Y water treatment plant (WTP). It is generally well-known that the removal of NOM by MF Membrane is very low in water treatment process. But, the result of investigation on removal efficiency of NOM in advanced water treatment using the ceramic membrane was different as follows. The removal rate of organic contaminant by the ceramic membrane advanced water treatment was determined to be 65.5% for the DOC, 85.8% for UV254, and 77 to 86% for DBPFP. The removal rate of pre-ozonation was found to be 6 to 15% more effective compared with the pre-chlorination. The removal rate of DOC and UV254 in biological activated carbon(BAC) process was over 50% and 75%, respectively although the rate was decreased 10 ~ 20% according to analysis items in converting from GAC to BAC.

PURPOSES: The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. For general construction material used, there is certain theoretical limit in sizes. For super road structure construction, the reduction in panel weight is the first step to take in order to break such size limits. METHODS: For a typical road structures panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. RESULTS: All types of advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel. The concrete panel is treated as a special orthotropic plate to obtain more accurate result. CONCLUSIONS: Advanced composite sandwich panels are considered as a self-weights less than one tenth (10%) of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of road structures.

본 연구는 축산분뇨 처리장(바이오가스 플랜트) 액비의 고도처리에 적합한 공정을 도출하기 위한 기초 연구이다. 액비를 고도처리하기 위하여 나노여과 및 역삼투(reverse osmosis) 공정을 각각 사용하였고, 전처리공정으로서 담체를 첨가하지 않은 MBR과 담체를 첨가한 MBR을 각각 적용하여 비교하였다. 액비의 질소는 주로 암모니아성 질소의 형태로 존재하였다. MBR의 운전에서 담체(biomedia) 유무에 따른 COD, T-N 및 T-P의 제거효율에서 큰 차이는 없었으나, 담체를 첨가한MBR의 TMP는 담체를 첨가하지 않은 MBR에 비해 매우 서서히 증가하였다. 전처리 공정으로 담체를 첨가한 MBR 공정을사용한 경우, NF에 의한 COD, T-N 및 T-P의 제거효율은 각각 99.8, 86.5% 및 99.8%이었으며, RO에 의한 제거효율은 각각99.9, 86.8% 및 99.9%이었다. MBR과 NF/RO 공정을 이용하여 처리한 액비의 최종 수질은 분뇨처리장 방류수 수질기준과비교하였을 때, COD와 T-P는 방류수 수질기준을 만족하였으나, T-N은 수질기준에 부적합하였다. 따라서 T-N에 대한 방류수 기준을 만족시키기 위해서는 MBR 조업 cycle의 조정 또는 나노여과/역삼투에 의한 2차 재처리 등의 개선이 필요한 것으로 판단된다.

Medical technologies are gaining in importance because of scientific and technical progress in medicine andthe increasing average lifetime of people. This has opened up a huge market for medical devices, where complex-shapedmetallic parts made from biocompatible materials are in great demand. Today many of these components are alreadybeing manufactured by powder metallurgy technologies. This includes mass production of standard products and alsocustomized components. In this paper some aspects related to metal injection molding of Ti and its alloys as well asmodifications of microstructure and surface finish were discussed. The process chain of additive manufacturing (AM)was described and the current state of the art of AM processes like Selective Laser Melting and electron beam meltingfor medical applications was presented.

C/N 비가 낮은 농촌마을 하수의 고도처리를 위하여 0.4 µm의 세공크기를 갖고 있는 평막이 침지된 연속회분식 반응기를 사용하였다. 분말활성탄의 투입, 폭기량 및 유입 유기물 농도가 처리효율과 여과 성능에 미치는 영향을 조사하였다.54일 이내의 조업 초기에서는 C/N 비가 증가할수록 COD, T-N 및 T-P의 제거율과 MLSS 농도는 증가하였다. 조업 89일 후의 COD, T-N 및 T-P의 제거율은 각각 97.1%, 75.0% 및 48.3%이었다. 막여과에 의해 처리수에서 SS는 검출되지 않았으며,T-P의 제거율이 낮게 나온 이유는 과잉의 슬러지를 배출하지 않았기 때문이다. 분말활성탄을 투여한 경우 조업이 진행됨에따라 분말활성탄의 혼합강도와 충돌빈도가 증가하여 슬러지의 입자크기가 감소하였으며, 이로 인해 분말활성탄을 투여하지 않은 경우에 비해 TMP 상승이 크게 나타났다.

The present study is triggered by the implementation of the achievement assessment system and the 2009 revised national curriculum, and the consequential need to help teachers to understand the new version of the curriculum when carrying out the achievement standard-based evaluation at school. The present study focuses on the newly introduced advanced courses of the 2009 revised national curriculum of English and provides an analysis of the hierarchical and interconnected relationship among these courses and the organization of their achievement standards. The study also provides guidelines for teachers on refining and customizing the curriculum-based achievement standards of the advanced English courses, for their own evaluation activities at school. Based on the analysis, the study attempts to suggest directions for the successful implementation of the new assessment system.

In this paper, two kinds of advanced powder processing techniques Metal Injection Molding (MIM) and Direct Laser Forming (DLF) are introduced to fabricate complex shaped Ti alloy parts which are widely used for med- ical and aerospace applications. The MIM process is used to strengthen Ti-6Al-4V alloy compacts by addition of fine Mo, Fe or Cr powders. Enhanced tensile strength of 1030 MPa with 15.1% elongation was obtained by an addition of 4 mass%Cr because of the microstructural modification and also the solution strengthening in beta phase. However, their fatigue strength was lower compared to wrought materials, but was improved by HIP. Subsequently, the effect of feed- ing layer height (FLH) on the characteristics of the DLF compacts was investigated. In the case of 100 µm FLH, sur- face roughness was improved and nearly full density (99.8%) was obtained. Also, tensile strength of 1080 MPa was obtained, which is higher than the ASTM value.

PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the D22 stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.

PURPOSES: Current theories for composite structures are too difficult for design engineers for construction. The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. METHODS: Some laminate orientations have decreasing values of D16, B16, D26 and B26 stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. In order to study the effect of Mx on the equilibrium equations, two cases are considered. Mx term is considered or neglected. RESULTS: Most of the road structures have high aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms. CONCLUSIONS: Most of the road structures have plate aspect ratios higher than 2. It is concluded that, for all boundary conditions, neglecting the longitudinal moment(Mx) terms is acceptable if the aspect ratio (a/b) is equal to or higher than 2. This conclusion gives good guide line for design of the road structures.

Almost all buildings and infrastructures made of advanced composite materials are fabricated without proper design. Unlike airplanes or automobiles, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long span bridges. People try to build 100-story buildings or several thousand meter long span bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design. Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical natural frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method. In this paper, concept optimization and folded plate theory are presented for practicing engineers.