Micelle formation and adsorption at the Ti02 interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous Ti02 dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the I1/I3 ratio, as the copolymer concentration increase; I1 and I3 are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of TiO2 particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with TiO2. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with Al2O3(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, 4℃, 40℃, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

In consideration that a high tensile strength and ion exchange capacity are maintained as the swℓing of membrane is controlled by the coagulation of PSf with the introduction of ion exchange groups and PPSS without the introduction of ion exchange groups, the block copolymer of PSf and PPSS were synthesized. The cation exchange membrane was prepared by sulfonation with CSA and casted. The synthesized block copolymer and cation exchange membrane were characterized by FT-IR and their thermal stability was confirmed by TGA. The optimum sulfonation could be accomplished at a mole ratio of BPSf to CSA 1:3. The best electrochemical properties obtained by the optimal condition were area resistance of 4.37 Ωㆍtextrmcm2, ion exchange capacity of 1.71 meq/g dry membrane, water content of 0.2941 g H2O/g dry membrane, and fixed ion concentration of 5.81 meq/g H2O. When GBL was used as an additive, area resistance was increased by 13.7 % and ion exchange capacity was increased by 14.6%. When the membrane was fabricated in a form of composite using non woven cloth as a support. the tensile strength of membrane could be improved, but the electrochemical characteristics were not influenced.

The purpose of this study is to examine the standard scale of measuring a block of Kyongju(慶州), the Capital of the Silla Dynasty(B.C.57~A.D.935). Through the study, it is clarified that 1). the block of Kyongju city is planned and divided by using the eight-Zhou-foot(周尺) as a standard scale, which is equivalent to the length of one-bo(보(步); 2). the distance between the center of the streets is around 100 bo and the width of the block is around 90 bo; 3). the distance between the streets is very near to the distance 167.054m of Jing-tian-zhi(井田制), which supports the use of Zhou-foot as a standard scale. As a result, it can be maintained that the city planning of Kyongju is related to that the Jing-tian-zhi of the Zhou Dynasty and the standard scale of measuring a block of Kyongju us executed by using the eight-Zhou-foot standard scale.

Manual dextrity is frequently evaluated in rehabilitation to estimate hand function. The Box and Block Test(BBT) mearsures gross manual dextrity. The first goal of this study was to verify the test-retest reliability of the BBT for 4, 5 years old children. The second goal of this reserch was to develop normative data from 35 convenient sample of normal children. The results showed the test-retest reliability was high (Pearson product moment correlation coefficients of 0.71 to 0.82).

This research was conducted to obtain the basic information on the cell block phenomenon occuring during early development in vitro of mouse embryos. Early embryos were recovered at 3h post-hGG injection(hph). Various chemicals (EDTA, EGTA, DTPA, MA and PRA) were tested to examine the effects of them on the overcoming the 2-cell block phenomenon. One hundreds M of the chelating agents were added to the M16 medium containing embryos. The treated embryos were worked and transferd to fresh M16 medium after 1, 3, 6 and 12h of treatment. Development was examined at 58 and l2Oph injection, respectively. 44.7~68.9% of the treated embryos developed to 4-cell stages at 58hph. Only 17.6~60.3% of the embyos developed upto blastocyst at l20hph. Whereas control embryos showed slightly lower development in M16 medium alone (38.9~42.4%, 4-cell and 3.8~65.5%, blastocyst). Three mitogenic agents were tested. 51.6~63.8% and 43.4~48.1% of embryos developed up to 2-cell and blastocyst stage, respectively when treated in 5 g PHA-M Imi for 5 min, 1, 3 and 6h subsequently cultured in fresh M16 medium. Control embryos only showed 38.8% for 4cell and 5.9% fo blastocyst at 58 and l2Ohph, respectively. 100M PMA was also beneficial for the 2-cell block. Showing better development them that of control (42.4 vs 57.9~59.4% 4cell and 5.9 vs 25.0~55.6% blastocyst, respectively. However 1M butyric acid was toxic to early embryos, thus arresting further development. These result indicate that either chelating or mitogenic agents could be used to overcome the "in vitro 2-cell block" occuring during early development in vitro of ICR embryosCR embryos

The purpose of this study is to construct the ACD model for the block trading volume duration. The ACD model based on the block trading volume duration is referred to as Volume ACD (VACD) in this study. By integrating with GARCH-type models, the VACD based GARCH type models, which include VACD-GARCH, VACD-IGARCH and VACD-FIGARCH models, are set up. This study selects Chunghwa Telecom (CHT) Inc., offering the America Depository Receipt (ADR) in NYSE, to investigate the block trading volume duration in Taiwanese equity market. The empirical results indicate that the long memory in volume duration series increases dependence at level of volatility clustering by VACD (2,1)-FIGARCH (3,d,1) model. Moreover, the VACD (2,1)-IGARCH (1,1) exhibits relatively better performance of prediction on capturing block trading volume duration. This volatility model is more appropriate in this study to portray the change of the CHT Inc. prices and provides more information about the volatility process for investment strategy, which can be a reference indicator of financial asset pricing, hedging strategy and risk management.

본 연구에서는 빛 감성친화형 콘크리트에 광촉매를 적용하여 대기질 및 실내공기질을 개선하기 위한 LEFC 블록을 개발하고자 하였다. LEFC에 광촉매를 적용하게 되면 자외선 입사면 반대편에서도 투과로 인한 자외선이 존재하여 광촉매가 반응함으로써 일반 건축 자재를 적용한 경우보다 광촉매 반응효율이 크게 상승한다. 따라서 광촉매를 LEFC에 적용하기 위해 슬럼프, J-ring, L-box 테스트를 통한 자기충전성능을 평가하여 최적 배합을 결정하였고, 압축 및 휨 강도 시험을 통해 역학성능을 평가하였다. 그리고 TiO2 분포도를 확인하기 위해 SEM과 EDS 분석을 실시하였다. ALC골재와 단열재 적용으로 광촉매 사용량을 줄이고 단위중량을 감소시키는 방안을 활용하여 광촉매 효율을 증가시키는 빛투과 콘크리트 블록을 제작하였고, 향후 건조수축 등의 문제점 개선 및 NOx 제거 실험을 통한 LEFC 블록 성능 평가를 진행하고자 한다.

파리기후협정에 따른 온실가스 자발적 감축 의무 이행을 위해 세계적으로 석탄발전과 원자력발전의 비중을 줄이고 태양광 발전을 비롯한 재생에너지의 보급에 국가적 노력을 기울이고 있다. 우리나라도 법령을 도입하여 2040년까지 재생에너지의 발전비중을 30~35%까지 늘리고자 하고 있다. 또한 국외에서는 태양광 발전을 보도 및 도로에 적용하고자 하고 노력하고 있으나 국내의 경우 관련 연구가 전무한 실정이다. 따라서 태양광발전 도로를 개발하기 위한 선행연구로서 보도 및 광장에 적용가능한 태양광 발전 콘크리트 블록을 개발하였으며 이를 현장에 시공하여 적용성을 평가하였다. 실내실험결과 압축강도는 25.5~35.7MPa이 측정되었고 휨강도는 5.1~10.5MPa이 측정되어 국내 기준은 모두 만족하는 것으로 나타났으나 단위시멘트량이 많을수록 부순잔골재의 혼입에 따라 강도가 낮게 측정되었다. 흡수율은 최대 5.7%로 나타나 국내 기준인 7%이하를 만족하였으며 동결융해시험 결과 100싸이클 후 압축강도 감소율은 최대 6.3%로 나타나 양호한 수준으로 측정되었다. 시공 후 침하량을 측정결과 최대 2.498mm가 측정되었으며 전면적에 대해 불규칙한 침하가 발생하였는데 이는 시공시 모래층의 다짐이 불량 하였거나 우수에 의한 모래 유출로 인한 것으로 판단된다. 초기발전량의 경우 일사량을 고려하면 적정량이 측정되었다. 태양광 패널과 콘크리트 블록의 유지관리 기법은 추후 연구를 통하여 보다 효율적으로 확립할 필요가 있다.

Purpose – As the scope of existing digital transformation expanded to various degrees, the Fourth Industrial Revolution came into being. In 2016, Klaus Schwab, Chairman of the World Economic Forum (WEF), said that the new technologies that lead the fourth industrial revolution are AI, Block chain, IoT, Big Data, Augmented Reality, and Virtual Reality. This technology is expected to be a full-fledged fusion of digital, biological and physical boundaries. Everything in the world is connected to the online network, and the trend of 'block chain' technology is getting attention because it is a core technology for realizing a super connective society. If the block chain is commercialized at the World Knowledge Forum (WKF), it will be a platform that can be applied to the entire industry. The block chain is rapidly evolving around the financial sector, and the impact of block chains on logistics, medical services, and public services has increased beyond the financial sector. Research design, data, and methodology – Figure analysis of data and social science analytical software of IBM SPSS AMOS 23.0 and IBM Statistics 23.0 were used for all the data researched. Data were collected from hotel employees in China from 25th March to 10th May. Results – The purpose of this study is to investigate the effect of the block chain characteristics of the existing hotel reservation system on the intention to use and to examine the influence of the block chain characteristics of the hotel reservation system on the intention to use, We rearranged the variables having the same or similar meaning and analyzed the effect of these factors on the intention to use the block chain characteristic of the hotel reservation system. 339 questionnaires were used for analysis. Conclusions – There are only sample hotel workers in this study, and their ages are in their 20s and 30s. In future studies, samples should be constructed in various layers and studied. In this study, the block chain characteristics are set as five variables as security, reliability, economical efficiency, availability, and diversity. Among them, Security and reliability made positive effects on the perceived usefulness. Also, security and economics did on the perceived ease. Availability and diversity did on both perceived usefulness and perceived ease. Perceived ease did on perceived usefulness. And perceived ease and perceived usefulness did on user intent. But security and economics did not on the perceived usefulness

민감도 향상을 위해 블록형 섬광체를 사용한 검출기를 개발하였다. 픽셀형 섬광체는 섬광체에서 발생된 빛을 최대한 광센서로 이동시키기 위해 픽셀 사이에 반사체가 위치하며, 반사체 부분으로 민감도 손실이 발생한다. 민감도를 향상시키고 픽셀형 섬광체의 특징을 가지게 하기 위해 블록형 섬광체를 레이저 각인을 통해 픽셀 형태의 섬광체로 가공하였다. 본 섬광체를 위치민감형 광전증배관과 결합하여 평면 영상을 획득 하였고, 각 픽셀별 에너지 스펙트럼과, 에너지 분해능을 측정하였으며, GATE 시뮬레이션을 통해 블록형 섬광체와 픽셀 섬광체의 민감도 분석을 수행하였다. 측정된 전체 에너지 분해능은 20.7%를 보였으며, 민감도는 픽셀 섬광체에 비해 18.5% 높은 결과를 나타내었다. 본 검출기를 감마카메라 및 양전자방출단층촬영 기기 등의 영상화 기기에 활용할 경우 높은 민감도 향상을 통해 촬영시간의 단축 및 적은 방사선원 사용으로 환자의 피폭선량 감소를 이룰 수 있을 것이다.

Recently, since stainless steels have important properties such as superior durability, fire resistance and corrosion resistance, they are widely used as non-structural element as well as structural element in building construction. In this study, experimental studies have been performed to investigate the structural behaviors such as ultimate strength and fracture mode of double shear two-bolted connection and four-bolted connection with austenitic stainless steel(STS304) and varied end distance. In case of two-bolted connection, all of specimens showed block shear fracture. And four-bolted connection failed by block shear fracture or net section fracture at test end.

Ground penetrating radar (GPR) is a typical sensor system for underground objects detection area. The multichannel GPR devices can give more detail and informative three-dimensional (3D) data for classification underground objects. Spatial information of underground objects can be well characterized in the three-dimensional GPR block data which consists of several B-scan and C-scan data. In this article underground object classification method is proposed by using 3D GRP data. Deep learning technique is recently being adopted into this field due to its powerful image classification capacity. The 3D GRP block data is then used to train deep three-dimensional convolution neural network (3D CNN). The proposed method successfully classifies cavity, pipe, manhole and subsoils having small false positive errors. The suggested method is experimentally validated by area data collected on urban roads in Seoul, South Korea.

The purpose of this experimental study is to investigate performance for atmosphere purification of concrete sidewalk block using high performance Nano TiO2 Carrier. As a result, concrete sidewalk block using high performance Nano TiO2 Carrier was confirmed to be superior than commercial TiO2 concrete sidewalk block to atmosphere purification.