Mesoporous alumina particles were prepared by spray pyrolysis using cetyltrimethyl-ammonium bromide (CTAB) as a structure directing agent and the effect of Al precursor types on the texture properties was studied using N2 adsorption isotherms, small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The surface area and the microstructure of alumina particles were significantly influenced by the Al precursor type. The largest BET surface area was obtained when Al chloride was used, whereas alumina particles prepared from Al acetate had the largest pore volume. According to small-angle X-ray scattering (SAXS) analysis, the alumina powders prepared using nitrate and acetate precursors had a clear single SAXS peak around 2θ = 1.0~1.5°, indicating that regular mesopores with sponge-like structure were produced. On the basis of TEM, SAXS, and N2 isotherm results, the chloride precursor was most profitable to obtain the largest surface area (265 m2/g), whereas, the nitrate precursor is useful for the preparation of non-hollow mesoporous alumina with regular pore size, maintaining high surface area (~233 m2/g).

This study examined the biostability and drug delivery efficiency of g-Fe2O3 magnetic nanoparticles (GMNs) by cytotoxicity tests using various tumor cell lines and normal cell lines. The GMNs, approximately 20 nm in diameter, were prepared using a chemical coprecipitation technique, and coated with two surfactants to obtain a water-based product. The particle size of the GMNs loaded on hangamdan drugs (HGMNs) measured 20-50 nm in diameter. The characteristics of the particles were examined by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-TEM) and Raman spectrometer. The Raman spectrum of the GMNs showed three broad bands at 274, 612 and 771 cm1. A 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay showed that the GMNs were non-toxic against human brain cancer cells (SH-SY5Y, T98), human cervical cancer cells (Hela, Siha), human liver cancer cells (HepG2), breast cancer cells (MCF-7), colon cancer cells (CaCO2), human neural stem cells (F3), adult mencenchymal stem cells (B10), human kidney stem cells (HEK293 cell), human prostate cancer (Du 145, PC3) and normal human fibroblasts (HS 68) tested. However, HGMNs were cytotoxic at 69.99% against the DU145 prostate cancer cell, and at 34.37% in the Hela cell. These results indicate that the GMNs were biostable and the HGMNs served as effective drug delivery vehicles.

Titanium dioxide particles are used as cosmetics, pigments, photocatalysts, adsorbents, catalytic supports, and sensors. The TiO2 particles were prepared by the precipitation in TTIP/Solvent mixtures and calcined at different temperatures. The resulting materials were characterized by XRD and SEM testing techniques. The TiO2 particles phase composition was determined by XRD ranging from amorphous to crystalline anatase and rutile largely proportional to the calcination temperature.

UV 경화형 수지를 바인더로 활용하고 다양한 크기, 형태, 재질의 입자를 첨가하여 분산시킨 분 산액을 TAC(triacetylcellulose) 필름에 코팅한 후 경화시켜 난반사필름을 제조 하는데 이때 투입된 입 자들이 필름의 물성에 미치는 영향을 분석하였다. 그 결과 입자의 형태가 구형 일 때 표면요철 형성에 유리하며 크기가 작은 입자보다는 큰 입자를 사용할 때 표면요철 형성이 용이하다는 것을 확인할 수 있었다. 입자의 재질이 표면요철에 미치는 영향은 입자의 크기나 형태에 의한 영향보다는 상대적으로 작았다. 입자와 바인더 수지는 각각 굴절율이 다르며 이에 따라서 바인더수지와 입자의 굴절율 차가 달라지게 된다. 따라서 입자의 재질에 따라 PS(polystyrene), silica, PMMA(poly(methyl methacrylate)) 순서로 total haze 변화율에 영향을 미치는 것을 확인할 수 있었다.

목적: 본 연구는 안경수건에 함유된 은나노 입자의 항균효과를 연구하기 위해 수행되었다. 방법: 은나노 입자가 함유된 안경수건과 함유되지 않은 안경수건의 세균수를 비교하였다. 결과: 은나노입자가 함유된 안경수건에서 뚜렷한 세균수의 감소가 관찰되었으며, 이 결과는 안경렌즈에 존재하는 세균에 대해 은나노 입자가 높은 항균성을 가짐을 의미한다. 결론: 가까운 미래에 나노기술을 이용한 항균작용 안경수건의 개발이 기대된다.

Eu red phosphor was prepared by microwave synthesis. The crystal phase, particle morphology, and luminescent properties were characterized by XRD, SEM, and spectrofluorometer, respectively. The prepared :Eu particles had good crystallinity and strong red emission under ultravioletet excitation. The crystallite size increased with calcination temperature and satuarated at . The primary particle size initially formed was varied from 30 to 450 nm with microwave-irradiation (MI) time. It was found that the emission intensity of :Eu phosphor strongly depends on the MI time. In terms of the emission intensity, it was recommended that the MI time should be less than 15 min. The emission intensity of :Eu phosphor prepared by microwave syntehsis strongly depended on the crystallite size of which an optimal size range was 50-60 nm

Titanium carbides are widely used for cutting tools and grinding wheels, because of their superior physical properties such as high melting temperature, high hardness, high wear resistance, good thermal conductivity and excellent thermal shock resistance. The common synthesizing method for the titanium carbide powders is carbo-thermal reduction from the mixtures of titanium oxide() and carbon black. The purpose of the present research is to fabricate nano TiC powders using titanium salt and titanium hydride by the mechanochemical process(MCP). The initial elements used in this experiment are liquid (99.9%), (99.9%) and active carbon(<, 99.9%). Mg powders were added to the solution in order to induce the reaction with Cl-. The weight ratios of the carbon and Mg powders were theoretically calculated. The TiC and powders were milled in the planetary milling jar for 10 hours. The 40 nm TiC powders were fabricated by wet milling for 4 hours from the +C+Mg solution, and 300 nm TiC particles were obtained by using titanium hydride.

Principles and historical background of high pressure liquid jet (HPLJ) technology is presented in the paper. This technology can be applied, among others, for production of nano particles. This target can be achieved in various type of disintegration systems developed and designed on the base of this technology. The paper describes principles of two examples of such systems: HPLJ-reactor, called also a linear comminuting system, HPLJ- centrifugal comminuting system, which prototypes have been manufactured. A linear mill, being high energy liquid jet reactor, has been developed and tested for micronization of various types of materials. The results achieved so far, and presented in the paper, show its potential for further improvement toward nano-size particle production. Flexibility of adjustment of the reactors and the mechanism of the process allows for the creation of particles with unprecedented rheology. The reactor can be especially suitable to micronize, mix and densify materials with a wide range of mechanical properties for various industrial needs. Presented prototypes of comminution systems generate interesting potentials toward production of nano particles. Their performance, based on up today research, confirms expected high efficiency of materials disintegration, which opens a new challenge for industrial applications. The paper points out benefits and area of possible applications of presented technology.

Silver particles were synthesized from silver nitrate by homogeneous precipitation and chemical reduction methods involving the intermediate silver cyanate. The obtained silver particles were characterized by XRD, SEM, TEM, and BET. Urea which could prevent the agglomeration of the reduced silver particles was used as a homogeneous precipitator. The spherical silver particles with average particle diameter of 100 nm were obtained under the optimum reaction conditions. The optimum synthetic conditions were found as follows: reaction temperature , reaction time 60 min, concentration of silver nitrate mol, urea mol, and sodium citrate mol. The phase of obtained silver particles was crystalline state and the silver particles were relatively dense, which had the surface area of .

Bioaerosols become a more noticed and important problem in indoor air quality (IAQ) control. In this study, we investigated antibacterial effects of silver nano-particles on Escherichia coli, the common Gram negative bacteria and Staphylococcus aureus, the well-mown Gram positive bacteria under aerosol conditions. The bioaerosols containing each bacterial culture were contacted with silver nano-particles sprayed in a closed chamber. Experimental results showed that the silver nano-particles had strong antibacterial activity against E. coli and S. aureus, respectively. As anticipated, high antibacterial activity was found at a high silver concentration and a long the contact time. It was also found that the bactericidal rate decreased with time due to the aggregation of silver nano-particles. Overall, the experimental finding suggested that silver nano-particles could be successfully applied to improve indoor air quality.

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water (DIO3). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than 200 Å remained after only a commercial dewaxer treatment. A DIO3 treatment in place of a dewaxer showed a low removal rate on a thick wax layer of 8000 Å due to the diffusion-limited reaction of ozone. A dewaxer was combined with a DIO3 rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the DIO3 rinse resulted in a surface with a contact angle of less than 5˚, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the DIO3 rinsing process. A reduction in the process time was obtained by introducing DIO3 cleaning with a dewaxing process.

배관 내부의 방사성 오염도를 측정하기 위한 ZnS(Ag)/플라스틱섬광체 조합의 알파/베타선 동시측정용 phoswich 검출기를 개발하였다. 알파/베타선 동시측정용 phoswich 검출기의 오염위치에 따른 검출 성능을 PSD (Pulse shape discrimination) 방법을 이용하여 평가하였다. 또한, 검출기를 방사성 오염물질로부터 보호하기 위한 오염방지용 필름에 대한 방사선 감쇄 정도를 실험적으로 평가하였다. PSD 방법으로 알파/베타선 분리 정도를 측정한 결과 충분히 알파와 베타선이 분리되었으며 오염방지용 필름의 적용 가능성을 확인하였다.

Al-Cu alloy nano powders have been produced by the electrical explosion of Cu-plated Al wire. The porous nano particles were prepared by leaching for Al-Cu alloy nano powders in 40wt% NaOH aqueous solution. The surface area of leached powder for 5 hours was 4 times larger than that of original alloy nano powder. It is demonstrated that porous nano particles could be obtained by selective leaching of alloy nano powder. It is expected that porous Cu nano powders can be applied for catalyst of SRM (steam reforming methanol).

나노입자란 직경 100nm 이하의 크기를 가진 입자로 가전, 기능성 화장품, 반도체, 항균제 및 광촉매제 등에 널리 사용되어 있어 본 연구는 9종류의 나노입자가 참굴 수정란에 미치는 영향을 살펴보았다. 나인입자를 첨가하지 않은 대조구에서는 인공 수정한 참굴 수정란의 78%가 D형 유생으로 발생하였다. 은(Ag)이 2% 함유된 AGZ020, Nano silver 및 P-25의 나노입자와 주석산화물인 SnO의 나노입자는 24시간 경과 후 0.05ppm 농도에서 각 각 22%, 52%, 58% 및 76%가 D형 유생으로 발생하였으나, 20ppm 농도에서 8시간 이내 참굴 수정란을 모두 파괴하였다. In, Sb, Sn, Zn 및 Ag-TiO2의 나노입자는 24시간 경과 후 0.05ppm 농도에서 모두 70%이상의 D형 유생으로 발생하여 상대적으로 낮은 농도에서 큰 영향을 받지 않는 것으로 나타났으나, 20ppm 농도에서 대조에 비해 D형 유생 발생율이 각 각 57%, 60%, 50%, 65% 및 64%로 저해되었다.

In this article a reliable and rapid method based on specific turbidimetry is proposed for the determination of sizes of nanoparticles. Conventionally in specific turbidimetry specific turbidities for a colloidal dispersion are measured as a function of light wavelength, and compared to theoretical values calculated from Mie scattering theory for presumed particle sizes. In contrast specific turbidity at a fixed wavelength is measured in the proposed method, and particle sizes are determined from the prepared calibration curve. The calibration curve is a plot of specific turbidity vs particle size and in this case the specific turbidities are measured for a couple of samples of known sizes.

This study quantitatively investigates foreign learners" acquisition of double particles in Korean. Some of the particles in Korean are jointly used with other particles and some are not, and the sequence of the particles determines the grammaticality of the double particles. Chinese and Japanese learners of Korean participated in the experiment in which they were asked to judge the grammaticality of a combination of a noun and double particles. The participants" judgment of the grammaticality of the double particles and their reaction time for the judgment were analyzed. The results of the study revealed that Japanese learners whose native language has a particle system similar to that of Korean performed better in the grammaticality judgment than Chinese learners whose native language shows no use of double particles. The advanced learners of Korean, regardless of their native languages, showed better judgment on the grammaticality of the use of double particles. This study also found that the type of double particles also affected the learners" judgment and that in the grammaticality judgment of ungrammatical joint of adverbial particles, most of the participants, regardless of their native languages and their Korean proficiency, scored much lower than in the judgment of the other types of double particles. The analyses of the participants" reaction time for the judgment showed congruent results with those of their grammaticality judgement.

니켈입자와 고분자를 함유한 니켈슬러리를 상전환법을 이용하여 중공사 형태로 성형한 후, 소결법을 이용하여 1,150℃ 환원조건에서 소결하여 금속 필터를 제조하였고 니켈 입자를 표면에 함침한 후, 800℃ 환원조건에서 소결하여 금속 정밀여과막을 제조하였다. 소결조건에 따른 금속 중공사 필터와 정밀여과막의 기공크기, 강도를 살펴보았다. 금속 중공사 정밀여과막은 산, 염기 및 염소에 대한 저항성이 뛰어났으며 역세척에 의한 투수량 회복률이 우수하였다.