국내 고속도로의 시멘트 콘크리트 포장은 초기 시공 비용이 저렴한 줄눈 콘크리트 포장을 주로 사용해 왔으나 포장이 노후화됨에 따 라 줄눈부 파손으로 인해 유지보수비용이 매년 증가하고 있는 실정이다. 이러한 줄눈부 파손을 근본적으로 해결할 수 있는 포장 형식 으로 연속철근 콘크리트 포장을 들 수 있다. 연속철근 콘크리트 포장은 1980년대에 중부고속도로 등에 적용하였으나 자연발생적이며 허용되는 횡방향 균열에 대한 이해가 부족하여 그 이후로는 사용이 미미하였으나 균열에도 불구하고 우수한 공용성을 지닌 것이 검증 되면서 최근에는 연속철근 콘크리트 포장을 확대하고 있는 실정이다. 하지만 본선차로가 연속철근 콘크리트 포장으로 시공되어도 접 속차로의 포장은 줄눈 콘크리트 포장을 사용하는 경우가 대부분이며 이러한 경우 서로 다른 포장 형식의 거동 차이가 타이바로 인해 구속되므로 과도한 응력 발생에 의해 접속부에서 파손이 발생하기도 한다. 따라서 본 연구에서는 본선차로가 연속철근 콘크리트 포장 이고 접속차로가 줄눈 콘크리트 포장일 경우 타이바가 포장 거동에 미치는 영향을 3차원 유한요소해석 프로그램을 통해 분석하였다. 유한요소해석은 타이바 배치가 서로 다른 모델을 구성하여 환경하중이 작용할 경우를 고려하여 수행하였다. 연구를 통해 타이바의 배 치가 줄눈에서 멀어지며 슬래브 중앙부에 집중적으로 배치될 경우에 슬래브와 타이바의 응력이 감소하는 것을 확인하였다

The importance of urban green space creation is increasingly recognized as the most realistic and efficient approach for fine dust mitigation in urban areas. Particularly considering the characteristics of domestic cities, the application of buffer green spaces along roads can maximize the efficiency of fine dust reduction without the need for separate green space creation. Accordingly, this study analyzed the fine dust mitigation effects based on the types of plantings in the central dividers and roadside trees in Jeonju City, Jeollabuk-do. To do this, we controlled various external variables of urban space and considered the planting arrangement types in the central dividers, carrying out the analysis using a CFD simulation. The simulation results confirmed that the central dividers with plantings demonstrated more effective ultrafine dust reduction than those without. Moreover, the arrangement of roadside trees showed a greater ultrafine dust reduction effect when adopting a multilayered structure compared to a single layer. Based on these findings, we concluded that installing both trees and shrubs simultaneously in the central dividers and along roads was effective for ultrafine dust mitigation. On this basis, we quantified the dust reduction effects of plants in urban street environments and proposed planting guidelines for roadside green spaces to improve air quality.

Before the 15th century, the main buildings of the residences of the ruling class in Seoul consisted of Momchae(身梗), Seocheong(西廳), and Naeru(內樓)‧Chimru(寢樓). Based on the equality of the relationship between husband and wife, the couple lived in the main building[Momchae] in the center of the mansion, but based on the individuality of the relationship between husband and wife, each had an area consisting of the same section within the building. Naeru‧Chimru was the two floors bedroom building became a common living space for the minister and wife, upstairs in summer, downstairs in winter. In preparation for large gatherings and important receptions, an open-structured West Hall(西廳) was located on the west side of the mansion. Momchae, Seocheong, and Naeru‧Chimru were the common building types and layouts of the residences of the highest ruling class, including high-ranking officials, until the reign of King Sejong. However, from around the time of King Seongjong, Seocheong and Chimru came to be regarded as privileged and luxurious buildings only allowed for the grand prince's residence. The layout of the bedroom, main building (including Wings), Outer Sarang[外舍廊], and Joyangru[朝陽樓] of Prince Bongrim's mansion built in the first half of the 17th century clearly shows the transitional period when the arrangement of chimru, main building, and western office was disrupted and the layout changed to the Inner main building(Anchae for wife) and Outer main building(Sarangchae for husband).

Recently, Free-Form and Irregular Shape high-rise buildings are constructed by IT technology development. Tilted shaped high-rise building which is one of Irregular shape high-rise buildings can cause lateral displacement by gravity load and lateral load due to tilted elevation shape. Therefore, it is necessary to review the behavior and structural aspects of the Tilted shape high-rise building by gravity load. In this paper, the dynamic characteristics of a tilted structure with a dual-core were analyzed with the core location as a design variable, and response behavior, vulnerable members, and vulnerable layers to earthquake loads were analyzed. As a result of the analysis, as the location of the core moved in an tilted direction, the eccentric distance and eccentric load decreased, reducing the axial force of the vertical members. However, the location of the core had little effect on the response.

원전 구조물의 실시간 모니터링 기술이 요구되고 있지만, 현재 운영 중인 지진 감시계통으로는 동특성 추출 등 시스템 식별이 제한 된다. 전역적인 거동 데이터 및 동특성 추출을 위해서는 다수의 센서를 최적 배치하여야 한다. 최적 센서배치 연구는 많이 진행되어 왔 지만 주로 토목, 기계 구조물이 대상이었으며 원전 구조물 대상으로 수행된 연구는 없었다. 원전 구조물은 미미한 신호대잡음비에도 강건한 신호를 획득하여야 하며, 모드 기여도가 저차 모드에 집중되어 있어 모드별 잡음 영향을 고려해야 하는 등 구조물 특성을 고려 해야 한다. 이에 본 연구에서는 잡음에 대한 강건도와 모드별 영향을 평가할 수 있는 최적 센서배치 방법론을 제시하였다. 활용한 지표 로서 auto MAC(Modal Assurance Criterion), cross MAC, 노드별 모드형상 분포를 분석하였으며, 잡음에 대한 강건도 평가의 적합성을 수치해석으로 검증하였다.

In the late Joseon Dynasty, the floor of the royal palace was covered with grass mat called ji-ui. Ji-ui was produced by connecting several mats named seokja(席子) and trimming the edge with narrow fabric named seon (縇). The standard manufacturing technique was to connect the shorter sides of the seokjas by overstitching them. A room was covered with either single or multiple ji-uis, depending on the case. In the case of the main and the subsidiary halls (jeong-jeon and pyeon-jeon, respectively) where the king conducted official meetings with the civil servants, multiple ji-uis were laid out to signify the division of space, which reflected the ceremonial aspects of the governing acts. The most essential division was the distinction of yeong-wae(楹外) and yeong-nae(楹內), with the jeon-goju (a tall frontal pillar inside the hall) functioning as the breakpoint. Jeong-jeon was divided into four spaces each covered with one ji-ui: yeong-nae, yeong-wae, and the left and the right sides of the royal seat named jwa-tap(座榻). Pyeon-jeon was covered with three ji-uis that divided the hall into three spaces: yeong-nae, yeong-wae, and hu-twae(後退) (the hind section) where the royal seat was placed on.

In an automotive plant, an automated storage and retrieval system (ASRS) synchronizes material handling flows from a part production line to an auto-assembly line. The part production line transfers parts on small-/large-sized pallets. The products on pallets are temporarily stored on the ASRS, and the ASRS retrieves the products upon request from the auto-assembly line. Each ASRS aisle is equipped with narrow-/wide-width racks for two pallet sizes. An ASRS aisle with narrow-/wide-width racks improves both storage space utilization and crane utilization while requiring delicate ASRS aisle design, i.e., the locations of the narrow-/wide-width racks in an ASRS aisle, and proper operation policies affect the ASRS performance over demand fluctuations. We focus on operation policies involving a common storage zone using wide-width racks for two pallet sizes and a storage-retrieval job-change for a crane based on assembly-line batch size. We model a discrete-event simulation model and conduct extensive experiments to evaluate operation policies. The simulation results address the best ASRS aisle design and suggest the most effective operation policies for the aisle design.

콘크리트 충전강관은 국부좌굴을 방지하고 내화성이 향상되기 때문에 건설현장에서 많이 적용되며 휨성능을 향상시 키기 위해 강관 내부에 철근을 보강하여 사용한다. 그러나 철근은 부식되며 내구성이 저하되기 때문에 이를 대신할 소재에 대 한 연구가 진행되고 있다. 탄소섬유보강근은 철근에 비해 경량이며 고강도와 내부식성이 우수하다는 이점이 있다. 그러나 임계 온도가 250℃로 철근의 임계온도인 538℃에 비해 현저히 낮기 때문에 내화피복이 필요하다. 따라서 열전달해석을 통해 탄소섬 유보강근을 사용하였을 때 온도분포를 확인하고 P-M상관도를 도출하여 적용 가능여부를 확인하고자 한다. 해석결과 내화성능을 확보하기 위해 콘크리트 피복두께 40mm, 뿜칠내화피복재 30mm를 적용하거나 콘크리트 피복두께 60mm, 뿜칠내화피복재 20mm 를 적용하면 3시간 내화성능을 만족하는 것으로 평가되었다.