철근의 부식 문제를 해결하기 위해 최근 복합재료 기반의 철근이 개발되어 사용되고 있으며 CFRP 그리드도 개발되어 구조부재로 사용되기 시작하고 있다. 그러나 CFRP 그리드의 부착 특성과 응력을 연구한 경우는 매우 드물다. 이에 본 실험은 CFRP 그리드의 부착거동, 부착응력을 평가하고 정착길이를 산정하기 위해 다양한 길이의 정착길이를 가진 인발실험체를 제작한 후 인발하였으며 실험 결과 부착력의 경우 정착길이가 길어질수록 커지며 반대로 부착응력은 정착길이가 길어질수록 작아지는 결과를 얻을 수 있었다. 이는 FRP 보강근도 같은 경향을 보이지만 CFRP 그리드와 FRP 보강근의 차이점은 부착응력의 추세선의 경향에서 두드러지며 또한, 최대 부착력 이후 거동에서 차이를 나타냈다. 위 실험 결과를 토대로 CFRP 그리드의 정착길 이를 산정한 결과 본 연구에서 사용된 CFRP 그리드의 보수적인 정착길이는 250mm로 나타났다.

본 논문에서는 상용프로그램을 이용한 유한요소해석을 통하여 포스트텐션 정착구역에서 보다 효율적인 응력분산이 가능 한 비부착식 단일 강연선용 포스트텐션 정착구 형상을 개발하는 것을 목표로 하였다. 이를 위하여 정착구 형상을 구성하는 각 부분의 변수해석을 수행하였다. 본 연구에서 제안한 정착구 형상을 사용하였을 때 발생하는 최대파열응력이 기존의 정착 구를 사용한 경우와 비교하여 정착구역내의 최대파열응력이 감소함을 확인하였다. 또한 본 연구의 정착구 형상을 사용하는 경우 최대파열응력 산정을 위해 AASHTO 및 기존 연구자들의 파열력 산정식을 통해 산출된 파열력을 비교 및 분석하였다. 그 결과 정착구 형상에 따른 위치계수를 수정한 파열력 산정식을 적용할 경우 정착구역이 효율적인 보강설계가 가능할 것으 로 판단되었다.

PURPOSES : A geo-grid pavement, e.g., a stress-absorbing membrane interlayer (SAMI), can be applied to an asphalt-overlay method on the existing surface-pavement layer for pavement maintenance related to reflection cracking. Reflection cracking can occur when a crack in the existing surface layer influences the overlay pavement. It can reduce the pavement life cycle and adversely affect traffic safety. Moreover, a failed overlay can reduce the economic value. In this regard, the objective of this study is to evaluate the bonding properties between the rigid pavement and a SAMI by using the direct shear test and the pull-off test. The predicted fractural energy functions with the shear stress were determined from a numerical analysis of the moving average method and the polynomial regression method. METHODS : In this research, the shear and pull-off tests were performed to evaluate the properties of mixtures constructed using no interlayer, a tack-coat, and SAMI with fabric and without fabric. The lower mixture parts (describing the existing pavement) were mixed using the 25-40-8 joint cement-concrete standard. The overlay layer was constructed especially using polymer-modified stone mastic asphalt (SMA) pavement. It was composed of an SMA aggregate gradation and applied as the modified agent. The sixth polynomial regression equation and the general moving average method were utilized to estimate the interlayer shear strength. These numerical analysis methods were also used to determine the predictive models for estimating the fracture energy. RESULTS: From the direct shear test and the pull-off test results, the mixture bonded using the tack-coat (applied as the interlayer between the overlay layer and the jointed cement concrete) had the strongest shear resistance and bonding strength. In contrast, the SAMI pavement without fiber has a strong need for fractural energy at failure. CONCLUSIONS : The effects of site-reflection cracking can be determined using the same tests on cored specimens. Further, an empiricalmechanical pavement-design analysis using the finite-element method (FEM) must be done to understand the appropriate SAMI application. In this regard, the FEM application analysis and bonding property tests using cored specimens from public roads will be conducted in further research.

Dental brackets are widely used by the orthodontists to correct the misalignment of teeth in the mouth over a long period of time. In this study, finite element analysis of orthodontic bracket has been carried out for the observation of the stress distribution and deformation pattern in the different materials bracket (Stainless Steel, Ceramic, Titanium, Polycarbonate and Nitinol) when subjected to arch wire torsion and tipping force. The simulation results were further optimized with respect to bracket attachment surface. It was found that it is possible to know the change in result is correlated with the attachment surface of the stress and deformation due to change in diameter. The results confirmed that the finite element method has proved to be successful for proper design analysis for future development of the teeth bracket.

Orthodontic is important to apply the optimal orthodontic force. The orthodontic bracket is deformed and the stress caused by tension and torsion of the wire. In this study, using the ANSYS the material that is currently widely used in orthodontic bracket material of stainless steel, ceramic, titanium, polycarbonate, by applying the nitinol analyzed the strain and the stress distribution on the bracket side. Simulation results on the stress distribution and deformation, and it was found a difference of each material.

This work examines the feasibility for estimating existing tensile stress on a stressed wire using the permeability of magnetic flux. A closed magnetic circuit has been constructed to induce magnetic flux inside a steel wire. With different tension stress levels on a wire, the permeability of magnetic flux on the wire has been measured. Two different experimental case studies have been conducted for the examination of sensitivity of permeability of magnetic flux on the stressed wire. One is a varying-length stress test, and the other is a fixed-length stress test. The results show that the permeability of magnetic flux in the varying-length stress test is inversely proportional to the applied stress, while the permeability in the fixed-length stress test is linearly proportional to the applied stress on the stressed wire. It is thus expected that the permeability of magnetic flux on a wire can be a promising indicator for the inspection of its tensile stress.

건축물의 고층화, 대형화에 따라 기둥이 부담해야할 하중이 증대되고, 이로 인한 기둥단면적의 증대에 효율적으로 대처하기 위해 CFT(콘크리트 충전강관)기둥의 형식을 개발하게 되었다. CFT기둥은 이질재료로 구성된 복합구조형식으로, 역학적 거동을 규명하기 위해 많은 연구가 이루어지고 있다. 본 연구는 원형과 각형의 CFT기둥에 있어서 콘크리트 코어와 강관, 두 이질재료간의 접촉면 부착응력에 대한 해석적 연구로서 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 shear-connector의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면의 역학적 특성에 대한 개선된 해석기법을 제시하고자 한다.

건축물이 고층화, 대형화 되어감에 따라 기둥이 부담해야할 내구성이 커진다. 이런 요구로 인하여 콘크리트 충전강관기둥의 형식을 개발하게 되었고, 역학적 거동을 규명하기 위해 연구가 이루어지고 있다. 본 연구는 실험에서 규명하기 힘든 콘크리트코어와 원형강관의 두 이질재료간의 접촉면에서의 상호작용에 대한 해석적 연구로써 비선형 해석프로그램인 ABAQUS/Standard Version 5.8을 이용하여 쉬어코넥트의 부착형태 및 위치에 따른 부착응력을 비교하고, 접촉면에 대한 역학적 특성을 나타낼 수 있는 모델링기법, 해석기법에 대하여 제시하고, 역학적 특성을 규명하고자 한다.

This paper is presented an experimental studies on bond stress between steel and concrete in concrete filled Rectangular steel tubes. In the actual building frames, vertical dead and live loads on beams are usually transferred to columns by beam-to-column connections. In case when concrete filled steel tubes are used as columns of an actual building frame which has a simple connection, shear forces in the beam ends are not directly transferred to the concrete core but directly to the steel tube. Provided that the bond effect between steel tube and concrete core should not be expected, none of the end shear in the beams would be transferred to the concrete core but only to the steel tube. Therefore, it is important to investigate the bond strength between steel tube and concrete core in the absence of shear connectors.

An analytic study on the bond stress between steel tube and concrete in concrete filled steel(CFT) rectangular column is presented in this paper. Recently buildings need members which are enhanced durability and ductility. Concrete filled rectangular column system is proposed as alternative plan. In this paper, ABAQUS/Standard Version 5.8 which is identified as usefulness for finite element analysis and has various element library is used. The variables in this study are the location and type of shear-connector. The modeling on contact problem practiced by Contact Pair and Contact Pressure method. In the step of physical bond, it is practiced by Change friction option After yielding of models, analytic results is less than that of experimental results.

This paper is presented an experimental studies on bond stress between steel and concrete in concrete filled steel tubes. In the actual building frames, vertical dead and live loads on beams are usually transferred to columns by beam-to-column connections. In case when concrete filled steel tubes are used as columns of an actual building frame which has a simple connection, shear forces in the beam ends are not directly transferred to the concrete core but directly to the steel tube. Provided that the bond effect between steel tube and concrete core should not be expected, none of the end shear in the beams would be transferred to the concrete core but only to the steel tube. Therefore, it is important to investigate the bond strength between steel tube and concrete core in the absence of shear connectors.

In this paper, the bond stress of Fe based Shape Memory Alloy(Fe-SMA) with near surface mounted strengthening was investigated. An lab-shear test using Fe-SMA strips glued with cementitious matrix was performed to evaluate bond stress. Bond length (250 mm, 350 mm, 450 mm) was considered as experimental variable. The bond stress and utilization of Fe-SMA are 1.487MPa and 80%, respectively, at the bond length of 450 mm.

This feasibility study examines if the tensile stress on bonded PSC tendon could be estimated by means of measuring electrical impedance. The impedances of the five beam specimens with different tensile stress levels were measured. As tensile stress on the tendon increases, the impedance of the tendon considerably decreases. Thus, it seems that the estimation of the tensile stress on the tendon could be possible by measuring the electrical impedance.

Because significant difference between normal concrete and fiber reinforced ultra-high strength concrete under tension and compression, bond behavior also have significant difference. Bond behavior may affect to the flexural behavior and shear behavior of reinforced concrete beams. Especially, because ultra high strength concrete usually be used as precast members, bond between concrete and steel rebar should be safely and accurately evaluated for design. In this study, bond test results about ultra high strength fiber reinforced concrete were investigated and evaluated with various types of prediction methods, especially for empirical equations.

최근 들어 FRP 판을 영구 거푸집 및 주요 인장보강재로 활용하기 위한 새로운 콘크리트 교량 바닥판 시스템 개발에 대한 연구가 활발히 진행되고 있다. 영구거푸집과 인장 보강재로의 병행이용은 기존의 콘크리트 바닥판 보다 공사비와 공사기간을 절감 할 수 있다. 본연구에서 는 영구거푸집 및 주요인장재로 활용한 FRP 판의 종류에 따른 현장타설 콘크리트와 부착응력에 대해 실험을 수행하였다. 부착성능 평가를 실시하였고, 부착특성을 나타내는 중요한 변수중에 하나로서 부착 강도 및 부착면의 파괴 매커니즘 특성을 알 수 있는 계면 파괴에너지를 나타내었다. 일반콘크리트에서 계면 파괴에너지는 GF11의 경우 0.24kN/m이고, GF21의 경우에는 0.43kN/m, GF31과 CF11의 경우에는 각각 0.46kN/m와 0.44kN/m로 나타났고, RFCON에서는 GF12의 경우 0.52kN/m, GF22와 CF12에서는 각각 0.36kN/m와 0.51kN/m로 나타났다.

본 연구는 콘크리트에서 인발실험(pullout test)을 통해서 인장을 가하지 않은 강연선의 부착특성을 파악하기 위한 것이다. 인장을 가하지 않은 강연선의 부착특성은 이형철근이나 인장이 가해진 강연선과는 다르게 나타난다. 본 연구에서 인장을 가하지 않은 강연선을 철근과 같은 용도로 사용하고 설계하기 위해서는 인장을 가하지 않은 강연선의 부착특성에 관한 연구가 필요하다. 본 연구는 묻힘 길이(10db～60db), 콘크리트 피복두께(45mm, 70mm, 100mm), 그리고 강연선의 직경(12.7mm : SWPC7B, 9.3mm : SWPC7A)을 주요변수로 선정하였다. 실험결과, 묻힘길이가 증가함에 따라 상대적으로 평균부착응력은 감소하는 경향을 보여주고 있으며, 묻힘길이가 60db 이상 확보된다면 인장을 가하지 않은 강연선의 부착성능에 기여할 수 있을 거라 판단된다.