Regulatory Guide (RG) 1.60 presents the response spectra for the seismic design, especially for the safe shutdown earthquake (SSE), of nuclear power plants. This guide is applicable to a two-step process involving the issuance of construction permits and operating licenses (10 CFR Part 50) as well as the issuance of combined construction and operating licenses (COLs), early site permits (ESPs), and standard plant design certifications (10 CFR Part 52) [1]. New reactor designs, however, require modified design response spectra (MDRS) by broadening the high-frequency range from design response spectra (DRS) in RG 1.60. In order to generate artificial time histories to meet the acceptable criteria described in NUREG-0800 [2], it9s necessary to develop the power spectral density of the MDRS. In this paper, we generate the artificial earthquake time histories of the MDRS for further research.

PURPOSES :This study proposes standards for rural access road pavement section and thickness design considering existing access road construction conditions; the study also proposes a complementary policy that can be used for design convenience.METHODS:Various literature review and case studies had been performed in terms of rural access road section and thickness design, both domestically and internationally, and this was followed by domestic rural access road field surveys. KPRP and KENLAYER were used to analyze the commonalities and predict the remaining life. Data on real cost is used to select an appropriate construction method through economic analysis.RESULTS:The economic efficiency of concrete pavement (15×15) was the highest in terms of economic efficiency of performance life and traffic volume. In the case of asphalt pavement, it is considered that the most economical method is to implement micro-surfacing method four times as a preventive maintenance method (once every 10 years and 4.5 years for asphalt concrete pavement and MS construction method, respectively). Repairable asphalt pavement is advantageous for areas where heavy vehicles are expected to pass. In the case of other general areas, it is considered economical to place concrete (15×15) pavement. However, as analytical results on its performance life are unavailable, it is to be considered for study in the future.CONCLUSIONS :This study proposed interim design guidelines based on various domestic and international design guidelines and case studies. However, in order to develop the final design criteria applicable to the field, it is necessary to (a) estimate the bearing capacity of the lower level of the pavement at various sites, (b) estimate the daily traffic volume, (c) implement advanced low-cost pavement technologies, and (d) propose maintenance standards and techniques for long-term performance.

System is the organization of hardware, software, personnel and facilities needed to perform a designated function within a stated environment with specified results. The trend of modern systems is getting more complex and larger. The system is necessary for modern society but the minor malfunction of the system can result the enormous human and material losses. Recently it is being heightened the concern for system safety and required to be built and applied Safety Engineering standard Guideline for safety of complex and large-sized system. This paper describes the System Engineering Process model integrated with Safety Engineering and the establishment of standard safety guidelines for safety of product development using DMADOV Methodology of the Lean 6 Sigma.

본 연구는 프리캐스트 콘크리트 슬래브를 이용한 급속 신설 도로 포장 공법의 국내 적용성을 분석하기 위한 기초 연구를 수행하고 시험시공을 통해 선설 프리캐스트 포장의 설계 및 시공 지침을 개발하기 위하여 수행되었다. 시험시공을 위해 가로, 세로, 깊이가 각각 실제 포장 슬래브의 1/2 크기인 슬래브를 설계하여 제작하였으며 이에 적합한 철근배근, 종방향과 횡방향의 연결부, 그라우팅 방법 등에 대하여 분석을 수행하였다. 이러한 슬래브를 이용하여 종방향과 횡방향으로 두 개씩 총 4 개의 슬래브를 연결하여 평탄성을 조절한 후 포켓 부분과 슬래브 하부의 공간을 그라우팅 함으로써 시공을 신속 용이하게 수행하였다. 시험 시공을 수행하며 프리캐스트 포장의 설계 및 시공과 관련된 세부 사항을 면밀히 분석하였으며 이에 바탕을 두어 프리캐스트 슬래브를 이용하여 급속하게 신설 도로를 건설할 때의 설계 및 시공 지침을 개발하였다.