최근 국내 구조물들의 노후화가 진행됨에 따라 구조물 보강과 관련된 연구에 대한 관심이 높아지고 있다. FRP보강은 노후화가 진행되어 성능이 저하된 구조물을 보강하는데 사용되며 주로 유리섬유 및 탄소섬유를 사용한다. 그러나 이 두 가지의 섬유는 경제적으로나 환경적으로나 나쁜 점이 있다. 따라서 본 연구에서는 친환경적이고 내열성이 우수한 현무암 섬유를 구조 용 보강재로 제시하고자 하였다. 또한 본 연구에서는 현무암 섬유에 가장 적합한 수지를 찾기 위하여 에폭시, 폴리에스테르 및 비닐에스테르를 함침 하였다.그 결과, 에폭시 수지를 사용하였을 때 가장 높은 인장 강도 및 탄성계수를 보였으며 전단강도 및 전단탄성계수가 타 수지에 비하여 50%정도 높게 측정되었다. 현무암섬유와 탄소, 유리 섬유의 물성을 비교한 결과 인장강도는 CFRF의 약 60%정도이나 GFRP보다 30%정도 높게 나타내었다.

본 연구는 소비자의 선호 촉감을 고려한 세면용 타월 개발에 도움을 주고자 수행되었다. 타월의 바탕조직은 동일하지만(면섬유), 파일을 구성하는 섬유의 종류가 서로 다른 3종(면 100%, 면 50% / 대나무 50%, 대나무 100%)을 시료로 선정하였다. 타월을 표준 세탁조건으로 반복세탁을 실시하였으며, 10회 세탁한 타월에 대하여 섬유유연제를 처리하여, 세탁에 따른 유연성과 흡수성(흡수속도와 흡수율) 등의 성능 변화를 고찰하고 대학생 남녀 소비자를 대상으로 주관적 감각과 촉감 선호도를 평가시켰다. 세탁횟수와 파일섬유의 종류에 따라 타월의 유연성은 유의한 차이를 보이지 않았다. 타월의 흡수성은 세탁에 따른 파일섬유의 종류에 따라 유의한 차이를 보여, 흡수속도는 대나무섬유 100%로 된 타월에서 높았으나, 흡수율은 면섬유로 된 타월이 높았다. 세탁 전 타월의 파일섬유 종류에 따른 주관적 감각 평가는 유의한 차이가 없었다. 세탁이 반복될수록 파일섬유의 종류에 따른 주관적 감각은 유의한 차이를 보였으며, 섬유유연제 처리시 더 부드럽고 매끄러우며 촉촉해진다고 평가하였다. 세탁 전 타월에 대한 촉감 선호도는 선호하는 편이었으나, 파일섬유 종류에 따른 유의한 차이는 없었다. 세탁횟수가 증가함에 따라 타월에 대한 촉감 선호도는 다소 저하되었으며, 대나무섬유로 된 타월의 촉감을 가장 선호하였다. 타월의 촉감 선호도에는 평활감, 유연감 등의 주관적 감각과 섬유유연제 처리가 영향을 주었다

본 연구에서는 인체 친화적이고 환경 친화적인 패션제품 소재기획을 위한 기초 자료를 제시하고자 수행되었다. 이를 위해서 4종의 섬유소 소재를 대상으로 염색조건을 달리하여 천연 쪽 염색을 실시하여 색채특성과 색채감성을 평가하였으며, 이러한 특성이 선호도에 미치는 영향을 분석하였다. 쪽 염색된 직물은 모두 중, 저명도와 저채도의 남색(PB)을 구현하였다. 이들 직물의 색채특성은 섬유종류와 염색조건에 따라 유의한 차이를 보였다. 쪽 염색된 직물에 대한 색채감성은 스포티 감성, 클래식 감성, 내추럴 감성 등 3가지 요인으로 분류되었다. 이러한 색채감성은 섬유종류와 염색조건에 따라 부분적으로 유의한 차이를 나타내었다. 또한 쪽 염색 직물의 색채특성과 색채감성 요인 간에는 부분적으로 유의한 상관관계를 보였다. 쪽 염색 직물의 색채 선호도에 영향을 주는 요인으로는 색채감성 요인 중에서 클래식 감성과 스포티 감성, 색채특성에서는 L*값인 것으로 나타났다.

The purpose of this research is to provide accurate information of household washers and detergents for consumers, so that help the producers who make washing machine and detergent to get basic material and also help consumers to choose washing machine. Experiment was proceed with two type of washers to compare energy consumption, washing performance, rinsing effectiveness further, damage caused by entanglement of laundry and fabric was assessed. Detergent P and T were used to compare the performance related to differences of ingredients of detergent. Soiled fabrics of EMPA 108 set were used to evaluate performance of washing by different types of contamination. A summary of experimental results are : First, for the consumption of water, drum-type washer consumed 53% less than pulsator-type washer. On the other hand, the washing time was almost similar for both these machines, but pulsator-type washer showed shorter progress, implying that power saving was more efficient in this case. Second, the drum-type washer showed better performance for contamination with all types of detergent, but the pulsator-type washer showed better rinsing performance. Third, the drum-type washer performed less data of tangle level and fabric damage. Fourth, detergent "P" exhibited better washing performance than did detergent "T", regardless of the type of soil. And with no limit of detergent variety, water-soluble protein soil showed high removal rate, liposoluble soil especially pigment was hardly removed.

이 연구에서는 녹차-목재섬유 복합보드에 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여 목재섬유에 녹차와 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 동적탄성률에 미치는 영향을 조사하였다. 또한, 동적탄성률을 이용하여 비파괴적으로 정적 휨강도성능을 예측하였다. 녹차-숯-목재섬유 복합보드의 동적탄성률은 백탄함유 복합보드에서 전체적으로 약간 우수하였으나, 숯의 종류에 따른 차이는 크지 않았다. 녹차와 숯의 배합비율이 증가할수록 복합보드의 동적탄성률의 감소하였다. E1급 요소수지를 사용한 복합보드가 E0급 요소수지를 사용한 그것보다 높은 동적탄성률을 나타내었으나, 양수지간의 차이는 녹차-목재섬유 복합보드에 비해 현저히 적었고, 녹차-목재섬유 복합보드보다 현저한 동적탄성률의 향상을 나타내는 것이 확인되었다. 복합보드의 동적탄성률과 정적 휨 강도성능사이에 대부분 1%의 신뢰수준의 상관관계가 확인되어, 동적탄성률로부터 정적 휨 강도성능이 예측이 가능하였다.

This study was designed to evaluate the effects of fructose(F) or sucrose(S) and guar gum intake on carbohydrate and lipid metabolism in 15-week-old male Goto-Kakizaki(GK) rats. Fifty rats were randomly assigned to 5 groups which were different in carbohydrate(25% of carbohydrate) and fiber(5% w/w) sources. The carbohydrate(CHO) sources of each group were comstarch(control group, 100% of CHO), fructose with cellulose(F), fructose with guar gum(FG), sucrose with cellulose(S), and sucrose with guar gum(SG). Each group was fed exterimental diet for 4 weeks. We measured food intake, body weight gain, adipose tissues weight and organs weight. We conducted oral glucose tolerance test(OGTT) and measured plasma insulin concentration to examine carbohydrate metabolism. To evaluate lipid metabolism, we measured the lipid profile of plasma, liver and feces. Food intake and weight gain of FG or SG groups tended to be less than those of F or S groups. Perirenal and epididymal fat pad weights of SG group were significantly lower than those of S group and those of FG group tended to be lower than those of F group. In OGTT, blood glucose values of F or S groups were significantly higher than those of C group, and FG or SG groups tended to be lower than those of F or S groups during the experimental time. The area under the curve(AUC) of C group was significantly highest among the groups, AUC and plasma insulin concentration of FG or SG groups tended to be lower than those of F or S groups. Plasma and hepatic triglyceride (TG) of FG and SG groups were significantly lower than those of F and S groups, plasma and hepatic total lipid(TL) and total cholesterol(TC) of FG and SG groups tended to be lower than those of F and S groups. Fecal TL, TG and TC of FG or SG groups tended to be higher than those of F and S groups. In conclusion, intake of guar gum should improve carbohydrate and lipid metabolism in partial substitution of fructose or sucrose for cornstarch in GK rats.

The present study was designed to investigate the effects of dietary fiber sources and levels on serum lipids in rats fed a hypercholesterol diet containing 0.5% cholesterol. Male Sprague-Dawley rats weighing 52.7 ± 7.27g were devided into sevel groups by completely randomized block design and fed various dietary fibers which were prepared from Rice bran, Siraegi (The dried green parts of a radish) and Bracken Fern at a level of 5% and 10% respectively. The results obtained in this study are summarized as follows: 1. Body weight gains were not significantly different among the groups and food intake was significantly higher in rats fed a diet of Siraegi 10% than those fed the control diet. 2. Fecal wet weights were significantly increased in all experimental groups. 3. Levels of serum total cholesterol in all experimental groups were significantly lower than that of the control group except the level in the R 10(Rice bran 10%) group. 4. Free Cholesterol levels in the serum were increased in all experimental groups, especially the levels in the R 10 (Rice bran 10%) and S 10 (Siraegi 10%) groups were significantly higher than that of the control group. 5. Ester Cholesterol levels in the serum were significantly lower in rats fed the experimental diets than those fed the control diet. 6. There was a tendency of higher serum HDL-Cholesterol levels in R5 (Rice bran 5%), R10 (Rice bran 10%) and B5(Bracken 5%) groups compared to the control group however no significant differences were found between the control group and all the experimental groups except in the case of the S5 (Siraegi 5%) group. 7. LDL, VLDL-Cholesterol levels in the serum sere significantly reduced in the S5 (Siraegi 5%), B5 (Bracken 5%) and B10 (Bracken 10%) groups. 8. The HDL-C./Total-C. Ratio was increased in all experimental group especially the Ratios in the S5 and B5 groups were significantly higher than that of the control group.

This paper describes the effect of tensile strength and aspect ratio of fiber on compressive and flexural toughness index of high- and normal-strength steel fiber-reinforced concrete(SFRC). For this purpose, eight types of SFRC mixtures were made and tested. Test results indicate that the compressive and flexural toughness index of SFRC increased with increasing in tensile strength and aspect ratio of steel fiber.

In this study, it evaluate the electrical conductivity of fiber reinforced cement composite by Fiber type. Hooked-ended steel fiber, Smooth steel fiber and Amorphous metallic fiber were reinforced 2.0 vol.% in cement composites respectively. The electrical conductivity was evaluated by calculating the electrical resistivity of each specimen after measuring the electrical resistance.

In this study, We evaluated the flexural behavior of high performance fiber reinforced cementitious composite (HPFRCC) with single steel fibers. to do this, we considered different types of steel fibers such as hooked, twisted and straight fibers. Test results indicated the flexural performance tends to increase as the incorporation rate of steel fiber increases and when the length of the fiber is long and at the high volume fractions(vf of 2.0) the flexural high performance was reduced.

The purpose of this paper is to evaluate the flexural strength and deflections developed of FRC beam with tensile bars composed of two layers combinations of steel bar, GFRP bar, and CFRP bar. As a test result, specimen with CFRP bars had the greatest maximum flexural strength. Specimens with FRP bars had more brittle failure behavior than only steel bars.

The purpose of this experimental research is to investigate the effect of types of lathe scrap on the characteristics of lathe scrap reinforced cementitious composites (LSRCCs). For this purpose, three types of lathe scraps were collected from processing plants of metal, and then LSRCCs containing these were made for 2mm width and 40mm length. As a result, it was observed from the test results that the compressive and flexural strength of LSRCCs were larger than these of plain mortar and effect of types of lathe scrap on the characteristics of LSRCCs were slightly large.

In this study, shear behaviors of various SFRC were predicted using Vector 2 program. Obtained analytical data was compared with preceded experimental data performed by other researchers. It was found that one increase in the span to depth ratio results in 54% decrease in the shear strength. Likewise, 1% increase in the reinforcement ratio causes a 19.9 % increase in the shear strength.

The effect of steel fiber types on the self-sensing capacity of strain-hardening fiber-reinforced cementitious composites (SH-SFRCs) was investigated. Three types of fiber, including twisted, smooth and hooked fibers, were used with a volume content of 1.5% in a mortar matrix. Although all the SH-SFRCs exhibited self damage-sensing capacity, the gauge factor, representing for damage-sensing ability, was different according to the types of fiber as follows: twisted (138.09) > smooth (99.85) > hooked (88.50). The SH-SFRC with twisted fiber produced the highest gauge factor which is very favorable for development of self damage-sensor.

In this study, the electrical resistivity of high performance fiber reinforced cementitious composites (HPFRCC) with four different types of steel fiber were investigated namely as twisted fiber, hooked fiber, smooth fiber (0.2 mm) and smooth fiber (0.3 mm). Experimental results indicate that the electrical resistivity of HPFRCC changes with type and diameter of steel fiber.

In this study, it evaluates autogenous Shrinkage of high strength concrete with polymix fiber and type of aggregate. Consequently, When concrete is mixed with limestone aggregate and spalling prevention fiber, Compressive strength, modulus of elasticity and autogenous shrinkage was better.