In South Korea, over 400,000 Non-building Structures are inadequately managed and exposed to potential risks due to insufficient inspection systems, leading to an increase in accidents and significant losses of life and property. Therefore, it is crucial for users to conduct proactive self-inspections to identify and mitigate potential hazards. This study reclassified Non-building Structures into four main categories by analyzing their structural characteristics and associated risks through statistical analysis. Among these, retaining walls, which account for the largest proportion, were systematically analyzed to identify common damage patterns. Based on this analysis, self-inspection checklists were developed for both non-experts and experts. The proposed process involves an initial visual inspection using a simple non-expert checklist, followed by a more detailed expert-level inspection if any anomalies are detected. The reliability of this process was validated through approximately 120 validation processes.

해상특수교량은 특수한 환경적 조건뿐 아니라 고주탑의 구조형식, 보호재로 쌓여있는 케이블 등 특 수한 형식을 가지고 있어 일반적인 육안전검으로 안전점검을 할 수 없는 사각지대가 존재한다. 주탑의 외부 손상상태 및 케이블의 손상에 대해서는 정밀안전점검에서도 점검이 되지 않는 경우가 대부분이 므로 이에 대한 대책 마련이 시급하다. 또한 해상특수교량에 대한 전문적인 경험과 기술이 부족한 관 리자도 대상교량의 손상과 이상거동을 직관적으로 확인하고 판단할 수 있는 지원체계가 필요하다. 이 에 본 연구에서는 해상특수교량 고주탑에 대한 손상정보를 파악하기 위하여 드론의 자동비행 기술을 개발하고 이를 이용하여 주탑 외부 균열 손상에 대한 안전점검을 실시하고 이를 분석하였다.

The public safety management guidelines were introduced in 2019 and continue to be dedicated to advancing comprehensive measures for public safety management, with a primary focus on prioritizing the safety and well-being of the public within governmental institutions. To achieve this goal, our previous study developed a establishment procedure of risk assessment-based safety inspection system for public institutions that order construction projects and applied it to highway construction projects to evaluate its effectiveness. To enhance the practicality of the establishment procedure, it is essential to collect and analyze feedback from stakeholders regarding its performance and suitability. This study conducted a survey involving 200 participants who had experience with the establishment procedure, and performed statistical analyses to evaluate its performance and applicability. The survey results indicated that the participants reported a high level of satisfaction (scoring 4 and above on a 5-point Likert scale) in several areas: specialization of safety inspection items for different types of work (with a satisfaction rate of 65%), the evaluation process for safety ratings (64.5%), and their willingness to recommend the procedure to other institutions (75.5%). In the factor analysis with Varimax rotation, two factors emerged: (1) a specialization factor related to safety inspection items, and (2) a grading factor associated with safety evaluation results. Regression analyses of these factors unveiled significant positive relationships with improvements in safety and health performance, including the prevention of fatal accidents, heightened safety responsibility, and raised safety inspection standards. The establishment procedure of safety inspection system developed in our previous study can play a crucial role in reducing accidents resulting in fatalities and injuries at construction sites, ultimately contributing to a safer working environment for all involved parties.

Due to the aging of a building, 38.8% (about 2.82 million buildings) of the total buildings are old for more than 30 years after completion and are located in a blind spot for an inspection, except for buildings subject to regular legal inspection (about 3%). Such existing buildings require users to self-inspect themselves and make efforts to take preemptive risks. The scope of this study was defined as the general public's visual self-inspection of buildings and was limited to structural members that affect the structural stability of old buildings. This study categorized possible damage to reinforced concrete to check the structural safety of buildings and proposed a checklist to prevent the damage. A damage assessment methodology was presented during the inspection, and a self-inspection scenario was tested through a chatbot connection. It is believed that it can increase the accessibility and convenience of non-experts and induce equalized results when performing inspections, according to the chatbot guide.

Public institutions have a responsibility to ensure the safety of their employees and the public. One way to do this is to implement a systematic safety inspection system based on risk assessments and continuous improvements. This study developed a systematic safety inspection system for public institutions that are ordered construction projects. The proposed system in this study consists of a three-step process: (1) developing safety grade evaluation tables, (2) preparing and conducting safety inspections, and (3) evaluating and improving safety management grades. The first step is to develop safety grade evaluation tables by analysis and diagnosis of the construction site's work type, disaster statistics, and related laws. The second step is to conduct safety inspections using the developed evaluation tables. The third step is to determine the safety management grade based on the results of the safety inspection, and to improve risk factors found during the safety evaluation. The proposed system was implemented in highway construction projects carried out by public institutions. The results showed that the proposed system has two major effects: (1) reducing accident-related deaths and injuries, (2) improving safety management levels by continuous evaluation and improvement. The proposed system can be utilized in construction projects ordered by public institutions to improve the level of occupational safety and health.

우리나라에서는 1995년 부터 시설물의 안전관리에 관한 특별법(이하 시특법)이 시행되어 왔다. 그 이후, 우리나라에서는 크고 작은 사건사고가 있었고, 구조적 안전성 확보를 위해 수차례의 법 개정이 있었다. 한국시설안전공단에서는 건축물 정밀안전점검 및 정밀안전진단 보고서를 시특법에 근거해 평가하며 그 결과를 사례집을 통해 주기적으로 발간하고 있다. 본 연구의 목적은 안전성 검사 및 진단을 위한 기술 및 제도 개선 방안 도출에 있다. 이를 위해 2011 년부터 2015 년까지 시설안전공단에서 발행한 정밀안전점검 및 정밀안전진단 보고서의 평가 사례 데이터를 비교 분석하였다. 비교 분석 결과를 토대로 정밀안전점검 및 정밀안전진단 수행 중 발생하는 문제의 원인을 파악하기 위해 전문가를 대상으로 한 설문 조사를 실시하였다.

PURPOSES : This study is to develop a automate road mapping system using ARASEO(Automated Road Analysis and Safety Evaluation TOol) for road management. METHODS: The road survey van named ARASEO(Automated Road Analysis and Safety Evaluation TOol) was used to generate highway drawings for Korea National Road number 37 automatically. In order to generate the highway drawings for purpose of road management, it is required to acquired the information for highway alignment, road width and road facilities such as safety barrier and road sign. Therefore the survey van acquired and analyzed the road width, median and guardrail data using rear side laser sensor of ARASEO and recognized the traffic control sign and chevron sign using foreside camera images. Also the highway alignment which is the basic information for highway drawing can be analyzed by acquisition the every 1m positional and attitude data using GPU and IMU sensor and developed algorithm. Finally, in this research the CAD based drawing software was developed to draw highway drawing using the analysis result from ARASEO. RESULTS : This study showed the comparison result of the surveyed road width and drawing data. To make the drawing of the road, we made the Autocad ARX program witch run in CAD menu interface. CONCLUSIONS : Using this program we can create the road center line, every 500m horizontal and vertical ground plan drawing automatically.

A research was conducted on Seoul regional elementary, middle, and high school nutritionists to study about their perception of HACCP control standards & performance conditions and sanitation & safety inspection, to seek for more efficient methods of school meals' sanitation system settlement. All surveys were distributed and collected via email. A total of 305 survey papers were collected, and out of these, 300 school results were analyzed. As for CCP 1 performance conditions, 43.3% of the nutritionist put emphasis on temperature control for cooking duration and 71.0% said that they manage both temperature and PHF food control. In CCP 2 stage, 65.8% of the nutritionists maintained the food's temperature, and 56.7% documented the recordings after cooking. A total of 79.3% of the schools scored above 90 points on school meal sanitation & safety inspection, 3.72 points on necessity for revisions, 3.38 points on objectivity, and 3.34 points on reliability. As for these results, a clear CCP control criteria as well as training must be set. Also, because the necessity of revision for sanitation & safety inspection is higher than reliability and objectivity, appropriate complementary measures must be taken.

Since 1995, the facility of class 1 and 2, classified by law had been subject to system of post maintenance management where periodic safety inspection and diagnosis to identify any problems and to take appropriate measures as a matter of urgency. Although the standards and systems had been revised many times for continuous improvement due to surrounding environmental factors, the technical factors and other factors for improvements, continuous researches and efforts are needed to ensure even higher effectiveness. Furthermore, the consciousness of the management body that executes and implements such improvements for facility management is most important. Therefore in this study, through such analysis, more realistic management consciousness review was performed. Also the direction for improvements is proposed, to carry out more effective facility safety management systems implementation.

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and r

IMF이후 건설 물량은 감소하고 있는 경향이나 재해율은 그다지 감소하지 않고 있고 여전히 중대재해는 계속 발생하고 있는 추세이며, 건설업체에서는 안전관리에 대한비용을 더욱 아끼려 하고 있어 비용절감을 위해 재해예방을 위한 안전시설 비용이나 안전활동 비용을 투자하지 않고 있다. 따라서, 본 연구는 중·소규모 건설현장 안전점검의 실태를 조사 분석하여 문제점을 도출하고 효율적 운영방안을 제시하는 것으로 하였다 현행 안전점검의 실태조사를 위하여 안전점검의 관계담당자인 전국의 노동부 지방노동관서 근로감독관, 한국산업안전의 각 지역본부 및 지도원 기술직원, 안전점검대상 건설현장 관계자에게 각각 설문 조사지를 배부하여 실태를 조사하고 분석하였으며, 또한 노동부의 최근 년도인 1999년, 2000년도의 재해발생통계 및 안전점검실적 자료, 대한건설협회의 최근 년도별 건설공사 수주금액, 공사규모별 현황 및 외국의 건설현장 안전점검사례를 수집하고 분석하였다. 이러한 실태조사 등 수집된 자료분석 및 각종 참고문헌 연구를 통하여 안전점검의 대상현장을 선정하는 기준과 위반사항에 대한 행정 및 사법조치 기준에 대한 문제점을 제시하고 이러한 문제점에 대하여 효율적인 개선대책을 제시하였다.

Domestic construction industry has considerable level of construction performance and technology thanks to the economic development and as the result of performing diverse oversea construction project. However, construction disasters have been steadily increasing, and do severe disasters at faster pace. Most of such disasters happen at small and small medium-sized construction fields, which contract size is less than 10 billion won. small and medium-sized construction fields are not obliged to designate a safety manager, and have limitations in engaging self-regulating disaster prevention activities due to reduced budget for safety facilities. For the small and medium-sized construction sites with less than 10 billion won, the Ministry of Labor has been carrying out mobile inspections of construction safety. However, the effect so far is insignificant and an improvement plan is required. Therefore, in the present thesis, we derive problems appearing in the current construction safety mobile inspection system, investigate and study systems in foreign countries, and suggest an efficient and effective plan to operate safety technology inspections. First of all, we establish a standard to select sites to be inspected that are high in construction risk and disaster occurrence probability In addition, we suggest a plan to take administrative and judiciary measures based on the total score for disaster factors considering the disaster occurrence probability and the illegal practices. Furthermore, a scheme to maximize the effect of disaster prevention is sought by building an organic cooperative system between the Ministry of Labor, Korea Occupational Safety ＆ Health Agency and other organizations specialized in instruction of construction disaster prevention. Finally, we induce a research conclusion that leads to self-regulating safety management through checking and instructing systematic management on mobile inspections.

IMF이후 건설 물량은 감소하고 있는 경향이나 재해율은 그다지 감소하지 않고 있고 여전히 중대재해는 계속 발생하고 있는 추세이며, 건설업체에서는 안전관리에 대한 비용을 더욱 아끼려 하고 있어 비용절감을 위해 재해예방을 위한 안전시설 비용이나 안전 활동비용을 투자하지 않고 있다 따라서, 본 연구는 노동부에서 현재 시행하고 있는 건설현장 페트롤 점검의 실태를 조사ㆍ분석하여 문제점을 도출하고 효율적 운영방안을 제시하는 것으로 하였다. 현행 페트롤 점검의 실태

IMF이후 건설 물량은 감소하고 있는 경향이나 재해율은 그다지 감소하지 않고 있고 여전히 중대재해는 계속 발생하고 있는 추세이며, 건설업체에서는 안전관리에 대한 비용을 더욱 아끼려 하고 있어 비용절감을 위해 재해예방을 위한 안전시설 비용이나 안전활동 비용을 투자하지 않고 있다. 따라서, 본 연구는 노동부에서 현재 시행하고 있는 건설현상 페트롤점검의 실태를 조사ㆍ분석하여 문제점을 도출하고 효율적 운영방안을 제시하는 것으로 하였다. 현행 페트롤점검의 실태조사를 위하여 페트롤점검의 관계담당자인 전국의 노동부 지방노동관서 근로감독관, 한국산업안전의 각 지역본부 및 지도원 기술직원, 페트롤점검 대상 건설현장 관계자에게 각각 설문조사지를 배부하여 실태를 조사하고 분석하였으며, 또한 노동부의 최근년도인 1999년, 2000년도의 재해발생통계 및 페트롤점검 실적자료, 대한건설협회의 최근 년도별 건설공사 수주금액, 공사규모별 현황 및 외곽의 건설현장 페트롤점검사례를 수집하고 분석하였다. 이러한 실태조사 등 수집된 자료분석 및 각종 참고문헌 연구를 통하여 4가지 문제점을 도출하였으며 각 도출된 문제점에 대하여 효율적인 개선대책을 제시하였다.