New type of White-Light Emitting Diode (WOLED) that emits three primary colors of red, green and blue has been demonstrated. WOLED is properly laid out with emitting layers so that all three wavelengths of light can be emitted by using fit energy level, and the organic functional layer named white balanced layer (WBL) is introduced. As for the material used as WBL, the experiment used NPB that has electron blocking effect with its large LUMO value. The color purity of such WOLED can be easily adjusted through the adjustment of the number of electron carriers injected into light emitting layer. In this of study, color coordinate was (0.341, 0.424) and light emitting efficiency was 16.5 cd/A at current density 10 mA/cm2, so the WOLED demonstrated highly efficient characteristics of over commercial level.

Two different emitting compounds, 1-[1,1;3,1]Terphenyl-5-yl-6-(10-[1,1;3,1]terphenyl-5-ylanthracen-9-yl)-pyrene (TP-AP-TP) and Poly-phenylene vinylene derivative (PDY 132) were used to white OLED device. By incorporating adjacent blue and yellow emitting layers in a multi-layered structure, highly efficient white emission has been attained. The device was fabricated with a hybrid configuration structure: ITO/PEDOT (40 nm)/PDY-132 (8∼50 nm)/NPB (10 nm)/TP-AP-TP (30 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). After fixing TP-AP-TP thickness of 30 nm by evaporation, PDY-132 thickness varied with 8, 15, 35, and 50 nm by spin coating in device. The luminance efficiency of the white devices at 10 mA/cm2 were 2.93 cd/A∼6.55 cd/A. One of white devices showed 6.55 cd/A and white color of (0.290, 0.331).

4-Methyl-7-(10-phenyl-anthracen-9-yl)-chromen-2-one (PhAC), 4-Methyl-7-(10-naphthalen-1-yl-anthracen-9-yl)-chromen-2-one (1-NAC), 4-Methyl-7-(10-naphthalen-2-yl-anthracen-9-yl)-chromen-2-one (2-NAC), and 7-Anthracen-9-yl-4-methyl-chromen-2-one (AC) were synthesized through Suzuki aryl-aryl coupling reaction. Four compounds were used as emitting layer (EMLs) in non-doped OLEDs with the following structures: ITO/2-TNATA (60 nm)/NPB (15 nm)/EMLs (35 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). Non-doped devices showed luminescence efficiency of 2.14, 2.07, 1.52, and 1.12 cd/A at a current density of 10 mA/cm2.

New three emitting compounds, AK-1, AK-2 and AK-3 including diazocine moiety were synthesized through Suzuki-coupling reaction. Physical properties such as optical, electroluminescent properties were investigated. UV-visible spectrum of AK-1, AK-2 and AK-3 in film state showed maximum 392, 393 and 401 nm. PL spectrum of AK-1, AK-2 and AK-3 showed maximum emission wavelength of 472, 473 and 435 nm. Three compounds were used as EML in OLED device: ITO/2-TNATA (60 nm)/NPB (15 nm)/EML (35 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). AK-3 OLED device showed C.I.E value of (0.18, 0.26) and luminance efficiency of 0.51 cd/A at 10 mA/cm2. New derivatives including diazocine moiety were introduced as OLED emitting material and the EL efficiency was increased by the proper combination of core and side group.

7-(4-([1,1-biphenyl]-4-yl(9,9-dimethyl-9H-fluoren-2-yl)amino)phenyl)-4-methyl-2H-chromen-2-one (BPFA-C) including coumarin moiety was synthesized through Suzuki aryl-aryl coupling reaction. Optical and electrical properties were examined by UV-visible absorption spectra, PL spectra, and AC-2. UV-visible spectrum of BPFA-C in a film state showed maximum absorption wavelength of 367 nm. PL spectrum of BPFA-C show maximum emission wavelength of 511 nm. BPFA-C showed highly efficient luminescence property. EL spectrum of BPFA-C exhibited a maximum value of 504 nm and BPFA-C device provided luminescence efficiency of 4.59 cd/A, power efficiency of 3.17 lm/W, and CIE (x,y) of (0.25, 0.53) at a current density of 10 mA/cm².

본 연구에서는 SiO2 나노파티클-전도성 고분자 PEDOT:PSS 복합 구조 기반의 유기발광다이오 드용 내부 광추출 구조를 간단한 용액 공정으로 제작하였다. 또한, 다양한 농도의 SiO2 나노파티클을 PEDOT:PSS에 분산하여 그 구조를 확인하였고, 상부/하부 버퍼레이어의 도입이 내부 광추출 구조 형성에 미치는 영향에 관하여 알아보았다.

본 연구에서는 대기 중 용액공정으로 유기발광다이오드(OLED)를 구현하였으며, 발광재료로서 고분자와 저분자 가 혼합된 하이브리드 host 물질과 저분자 dopant를 사용하였고, 고분자 소재의 홀이동층과 저분자 소재의 전자이동층 을 사용하였다. 모든 유기층들을 대기 중에서 용액공정으로 스핀코팅 되었으며, 용액공정 기반 OLED의 효율 향상을 위 해서 발광층의 두께 및 열처리 공정의 최적화 조건에 대해서 살펴보았다.

White organic light-emitting diodes with a structure of indium-tin-oxide [ITO]/ N,N-diphenyl-N,N-bis-[4-(phenylm- tolvlamino)-phenyl]-biphenyl-4,4-diamine [DNTPD]/ [2,3-f:2, 2-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile [HATCN]/ 1,1- bis(di-4-poly-aminophenyl) cyclo -hexane [TAPC]/ emission layers doped with three color dopants/ 4,7-diphenyl-1,10- phenanthroline [Bphen]/ Cs2CO3/ Al were fabricated and evaluated. In the emission layer [EML], N,N-dicarbazolyl-3,5-benzene [mCP] was used as a single host and bis(2-phenyl quinolinato)-acetylacetonate iridium(III) [Ir(pq)2acac]/ fac-tris(2- phenylpyridinato) iridium(III) [Ir(ppy)3]/ iridium(III) bis[(4,6-di-fluoropheny)-pyridinato-N,C2] picolinate [FIrpic] were used as red/green/blue dopants, respectively. The fabricated devices were divided into five types (D1, D2, D3, D4, D5) according to the structure of the emission layer. The electroluminescence spectra showed three peak emissions at the wavelengths of blue (472~473 nm), green (495~500 nm), and red (589~595 nm). Among the fabricated devices, the device of D1 doped in a mixed fashion with a single emission layer showed the highest values of luminance and quantum efficiency at the given voltage. However, the emission color of D1 was not pure white but orange, with Commission Internationale de L'Eclairage [CIE] coordinates of (x = 0.41~0.45, y = 0.41) depending on the applied voltages. On the other hand, device D5, with a double emission layer of mCP:[Ir(pq)2acac(3%) +Ir(ppy)3(0.5%)]/ mCP:[FIrpic(10%)], showed a nearly pure white color with CIE coordinates of (x = 0.34~0.35, y = 0.35~0.37) under applied voltage in the range of 6~10 V. The luminance and quantum efficiency of D5 were 17,160 cd/m2 and 3.8% at 10 V, respectively.

본 연구에서는 발광층의 전자와 정공의 재결합 영역을 확인하고, 단계적 도핑구조를 이용하여 여기자들의 효율적인 분배를 통해 roll-off 효율을 감소시켜서 녹색 인광 유기발광다이오드의 수명 증가 를 나타냈다. 발광층 내 호스트는 양극성의 4,4,N,N'-dicarbazolebiphenyl (CBP)를 사용하여 전하의 이 동을 원활하게 하였다. 발광층을 네 구역으로 분할하여 각각 소자를 제작하였고, 네 구역의 도판트 농도 에 따라 발광효율과 수명 향상을 보였다. 이로써 발광층 내의 단계적 도핑구조를 이용하여 캐리어와 여 기자들이 원활하게 분배된 것을 확인하였다. 기준소자 대비 발광층의 도판트 농도를 5, 7, 11, 9% 순서 로 단계적 도핑구조를 적용한 device C의 수명이 약 73.70% 증가하였고, 휘도 효율은 51.10 cd/A와 외 부 양자 효율은 14.88%의 성능을 보였다.

본 연구에서는 전하 조절층을 이용하여 녹색 인광 유기발광다이오드의 효율의 향상을 나타냈다. 양극성의 4,4,N,N'-dicarbazolebiphenyl (CBP)를 호스트와 전하 조절층으로 사용하여 발광층 내에서 전하의 이동을 원활하게 할 수 있다. 게다가 전하 조절층의 삽입으로 엑시톤을 효과적으로 발광층 내에 제한하여, 삼중항-삼중항 소멸 현상을 억제할 수 있음을 확인하였다. 발광층의 전체 두께는 유지하고, 전하 조절층의 변화를 준 다섯 개의 소자를 제작하여 최적화된 전하 조절층의 두께를 이용한 Device D는 외부 양자 효율 16.22%와 휘도 효율 55.76 cd/A의 성능을 보였다.

본 연구에서 7,7'-(2,2'dimethoxy-1,1'-binaphthyl-3,3'-diyl) bis(4-(thiophen-2-yl) benzo[e] [1,2,5] thiadiazole (TBT) 라는 binaphthyl기를 기반으로 가지는 녹색 도판트 물질을 합성하였다. 추가적으로 인광 발광 물질인 iridium(III)bis[(4,6-di-fluoropheny)-pyridinato -N,C2]picolinate (FIrpic)을 홀 수송용 호스트 물질인 N,N'-dicarbazolyl-3,5-benzene (mCP)에 도핑하고, TBT와 bis(2-phenylquinolinato)-acetylacetonate iridium(III) (Ir(pq)2acac)를 전자 수송용 호스트 물질인 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi)에 도핑하여 백색 빛을 발광하는 white organic light emitting diode (OLED)를 제작하였다. TBT를 사용하여 제작한 white OLED의 최대발광 효율과 외부 양자 효율은 각각 5.94 cd/A 과 3.23%를 나타냄을 알 수 있었다. Commission Internationale de I'Eclairage (CIE) 색 좌표의 값은 1000 nit에서 (0.34, 0.36)을 띄면서 순백색을 구현함을 확인하였다.

New organic light-emitting diodes with structure of indium-tin-oxide[ITO]/N,N'-diphenyl-N, N'-bis-[4-(phenyl-m-tolvlamino)-phenyl]-biphenyl-4,4'-diamine[DNTPD]/1,1-bis-(di-4-poly-aminophenyl) cyclohexane[TAPC]/bis(10-hydroxy-benzo(h)quinolinato)beryllium[Bebq2]/Bebq2:iridium(III)bis(2-phenylquinoline-N,C2')acetylacetonate[(pq)2Ir(acac)]/ET-137[electron transport material from SFC Co]/LiF/Al using the selective doping of 5%-(pq)2Ir(acac) in a single Bebq2 host in the two wavelength (green, orange) emitter formation were proposed and characterized. In the experiments, with a 300Å-thick undoped emitter of Bebq2, two kinds of devices with the doped emitter thicknesses of 20Å and 40Å in the Bebq2:(pq)2Ir(acac) were fabricated. The device with a 20Å-thick doped emitter is referred to as "D-1" and the device with a 4Å-thick doped emitter is referred to as "D-2". Under an applied voltage of 9V, the luminance of D-1 and D-2 were 7780 cd/m2 and 6620 cd/m2, respectively. The electroluminescent spectrum of each fabricated device showed peak emissions at the same two wavelengths: 508 nm and 596 nm. However, the relative intensity of 596 nm to 508 nm at those wavelengths was higher in the D-2 than in the D-1. The D-1 and D-2 devices showed maximum current efficiencies of 5.2 cd/A and 6.0 cd/A, and color coordinates of (0.31, 0.50) and (0.37, 0.48) on the Commission Internationale de I'Eclairage[CIE] chart, respectively.

Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.

In this study, we fabricated a polymer light emitting diode (PLED) and investigated its electrical and optical characteristics in order to examine the effects of the PFO [poly(9,9-dioctylfluorene-2-7-diyl) end capped with N,N-bis(4-methylphenyl)-4-aniline] concentrations in the emission layer (EML). The PFO polymer was dissolved in toluene ranging from 0.2 to 1.2 wt%, and then spin-coated. To verify the influence of the TPBI [2,2',2"-(1,3,5-Benzinetriyl)-tris(1-phenyl-1-H-benzimidazole)]electron transport layer, TPBI small molecules were deposited by thermal evaporation. The current density, luminance, wavelength and current efficiency characteristics of the prepared PLED devices with and without TPBI layer at various PFO concentrations were measured and compared. The luminance and current efficiency of the PLED devices without TPBI layer were increased, from 117 to 553 cd/m2 and from 0.015 to 0.110 cd/A, as the PFO concentration increased from 0.2 to 1.0 wt%. For the PLED devices with TPBI layer, the luminance and current efficiency were 1724 cd/m2 and 0.501 cd/A at 1.0 wt% PFO concentration. The CIE color coordinators of the PLED device with TPBI layer at 1.0 wt% PFO concentration showed a more pure blue color compared with the one without TPBI, and the CIE values varied from (x, y) = (0.21, 0.23) to (x, y) = (0.16, 0.11).

본 논문에서는 청색 인광 발광 물질인 bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium (III) (Flrpic)과 녹색 인광 발광 물질인 fac-tris(2-phenypyridine) irdium(III) (Ir(ppy)3)와 적색 인광 발광 물질인 his(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ((Bzppy)2Ir(acac))를 각각 적층하여 백색 유기 발광 다이오드를 제작하였고, 각각의 발광층 사이에 혼합된 스페이서인 4,4'-N,N'-dicarbazole-biphenyl (CBP):4,7-diphenyl-1,10-phenanthroline (BPhen)을 적층하여 그 때의 영향에 대하여 연구하였다. 최적화된 구조에서의 전력 효율은 0.014 mA/cm2에서의 19.7 lm/w를 나타내었으며, 0.127 mA/cm2에서의 11.5%의 외부 양자 효율을 나타내었고, 8 V에서 Commission Internationale do I'Eclairage (CIEx,y) coordinates (x=0.36, y=0.44)의 색좌표를 나타내었다.