Recently, high-rise residential buildings in Korea have adopted slender shear walls with irregular section shapes, such as T-shape, H-shape, and C-shape. In the seismic design of the slender shear walls, the transverse reinforcement for lateral confinement should be provided in the boundary elements to increase deformation capacity and subsequent ductility. However, in practice, the irregularity of the shear walls is not adequately considered, and the lateral confinement region is calculated for the rectangular wall segments. This study investigated the proper design method for lateral confinement regions using finite element analysis. The lateral confinement region was considered in analysis for two cases: 1) as a typical rectangular wall segment and 2) as an irregular wall. When the irregularity of the walls was considered, the compression zone depth was increased because the vertical reinforcement in the flange was addressed. The effect of lateral confinement design methods on the structural performance of the walls was directly compared under various design parameters, including the length of the flange, concrete compressive strength, vertical rebar layout, axial load ratio, and loading direction. According to the results of the parametric analysis, the peak strength and deformation capacity could be significantly increased when the lateral confinement region was calculated based on irregularly shaped walls, regardless of the design parameters. In addition, the effective compression zone was located within the lateral confinement region. Thus, it is recommended that the lateral confinement region of T-shaped walls is calculated by addressing the irregularity of the walls.

Non-uniform reinforced concrete brace facade systems are newly considered to improve seismic performance of reinforced concrete frame buildings under lateral load. For normal and high strength concrete of 30MPa, 80MPa, and 120MPa, the cross-sections of reinforced concrete brace facade systems were designed as different size with same amount of reinforcements. The strengthened frame systems were analyzed by a non-linear two-dimensional finite element technique which was considering material non-linearities of concrete and reinforcing bars under monotonic and cyclic loadings. From the study of non-linear analysis of the systems, therefore, it was provided that the proposed braced facade systems were reliable to improve laterally load-carrying capacity and minimize damages of concrete members through comparisons of load-displacement curves, crack patterns, and stress distributions of reinforcing bars predicted by current non-linear finite element analysis of frame specimens.

본 논문에서는 유한요소해석 프로그램을 통해 파괴 거동 유형별 철근콘크리트 기둥 및 폭발 하중을 모델링하였으며, 실제 실험과 의 동적 응답을 비교하여 모델의 적합성을 입증하였다. 개발한 모델을 이용하여 폭발 하중에 대한 부재의 동적 응답을 확인하기 위해 폭발 하중 시나리오를 설정하였으며 해당 시나리오별 폭발 하중에 대한 시간에 따른 변위 및 응력 결과를 도출하였다. 동적 응답을 통 해 폭발 하중에 대한 기둥의 성능평가(Ductility, Residual)를 수행하였으며 이를 비교 및 분석하였다.

IPCC에서 발표한 제6차 기후변화 보고서에 따르면 지구온난화에 따른 해수면 상승이 가속화되고 있으며, 2100년 예상 해수면 상승은 저탄소 시나리오(SSP 1~2.6)에서는 47cm, 고탄소 시나리오(SSP 5~8.5)에서는 82cm로 분석되었다. 해수면 상승은 항만 인프라에 심각 한 피해를 입히고, 항만 내에 정박 중인 선박의 계류안전성을 저하시킬 수 있다. 본 연구에서는 해수면 상승시 부두에 계류한 선박의 계류 안전성 향상 방안을 도출하기 위해 만조시 침수 피해가 잦은 목포항을 선정하여 해수면 상승 시나리오에 따른 실제 접안 선박에 대한 계 류 평가 요소의 민감도를 분석하였다. 분석 결과, 해수면이 상승함에 따라 동일한 환경조건에서 계류라인 장력, 계선주 하중, 계류라인 수 직각도, 선체 6자유도 운동값이 대체로 증가하는 것으로 분석되었다. 또한, 마루높이가 상향되면 모든 계류 평가 요소의 값이 대체로 감소 하여 선박 및 부두의 안전성 향상에 유리한 것으로 분석되었다. 본 연구 결과는 목포항 해수면 상승에 따른 항만 및 선박의 안전성 향상 방안을 확보하기 위한 기초자료로 활용될 수 있을 것이다.

In this study, considering the expansion/contraction behavior of the upper structure at all times and the abnormal behavior of the receiving friction elements that allow horizontal movement during earthquakes, a port receiving test body simulating the protrusion of the friction elements was created and the modulus performance was evaluated. In order to confirm the influence of the friction element's projection, the friction element's degree of separation was divided into four stages, and the shear behavior of the test specimen and the friction coefficient were confirmed. As a result of the experiment, it was found that the friction load increases as the protrusion degree of the friction element increases. On the other hand, as the degree of protrusion of the coefficient of friction increases, the coefficient of friction also increases. It was confirmed that damage to the friction elements during use increases the coefficient of friction, hinders smooth expansion and contraction of the upper structure, and causes stress concentration at the fixed-end support.

신기술에 대한 투자규모가 크게 증가하고 있고, 과학기술이 사회 전반적으로 대규모·복합적인 영향을 미치고 있다. 정부는 새로운 신기술이 사회에 수용되려면 과학기술에 대한 국민적 관심이 큰 만큼 기술이 국민과 사회에 미치는 영향에 대해서 잘 평가할 의무가 있다. 이를 위한 사회적 합의를 이루기 위해 기술영향평가를 한다. 이를 위한 방법에 대한 연구가 50년째 지속되고 있고, 다양한 학술연구와 수많은 신기술 대응 정책을 통해 논의 된 이후 시대적 변화와 흐름이 있었기에 글로벌 학계와 정책에서 신기술의 미래사회 영향력에 대한 다각적 분석 등이 강조되고 있다. 본 연구는 선진국의 기술영향평가 창안 방식과 우리나라에서 발전된 방식이 다름에도 불구 하고 그동안 신기술 기술영향평가 고려되어야 하는 예측요소와 단계 등 연구 변화에 주목하였다. 연구결과 인식도에 대해 기술 이해도, 전문성, 성별특성 세 개 요소를 도출하고, 기존 요소에 추가해 신기술 예측요소로 제안하였다. 연구의 결과는 우리나라 과학기술기본법에 의거 개선된 기술영향평가를 실시하는데 있어 학술 및 정책적 뒷받침하는 근거를 제시하였다.

As earthquakes have increased in Korea recently, people are paying attention to the seismic performance of buildings built in the past. Many school buildings in Korea were built based on standard drawings before the seismic design was applied. However, since school buildings are often designated as emergency evacuation facilities in case of disasters such as earthquakes, seismic evaluation and retrofit must be done quickly. This study investigated the failure modes among structural components (beams, columns, and joints), focusing on 1980s standard drawings for school buildings. The effects of column axial force, partial masonry infills, and different material strengths for concrete and rebar were considered for detailed evaluation. As a result, most of the joints were found to be the weakest among structural components. Column axial forces tended to make the joints more vulnerable, and partial masonry infills increased the possibility of joint failure and shear failure in columns.

Seismic demand on nonstructural components (NSCs) is highly dependent on the coupled behavior of a combined supporting structure- NSC system. Because of the inherent complexities of the problem, many of the affecting factors are inevitably neglected or simplified based on engineering judgments in current seismic design codes. However, a systematic analysis of the key affecting factors should establish reasonable seismic design provisions for NSCs. In this study, an idealized 2-DOF model simulating the coupled structure-NSC system was constructed to analyze the parameters that affect the response of NSCs comprehensively. The analyses were conducted to evaluate the effects of structure-NSC mass ratio, structure, and NSC nonlinearities on the peak component acceleration. Also, the appropriateness of component ductility factor (R p) given by current codes was discussed based on the required ductility capacity of NSCs. It was observed that the responses of NSCs on the coupled system were significantly affected by the mass ratio, resulting in lower accelerations than the floor spectrum-based response, which neglected the interaction effects. Also, the component amplification factor (a p) in current provisions tended to underestimate the dynamic amplification of NSCs with a mass ratio of less than 15%. The nonlinearity of NSCs decreased the component responses. In some cases, the code-specified R p caused nonlinear deformation far beyond the ductility capacity of NSCs, and a practically unacceptable level of ductility was required for short-period NSCs to achieve the assigned amount of response reduction.

선박의 주묘 위험성을 평가할 수 있는 프로그램이 개발되어 있지만 선박의 제원에 해당되는 다양한 입력요소들을 직접 찾아서 입력해야 하므로 VTS 관제사가 정박지에 정박 중인 선박들로부터 이러한 입력요소들을 모두 확인하여 프로그램을 활용하는 것은 현실적으로 어려운 상황이다. 이에 본 연구에서는 VTS 관제사 입장에서 선박으로부터 쉽게 획득할 수 있는 총톤수(GT)를 독립변수로 설정하고 프로그램 입력요소들을 종속변수로 하여 선형 및 비선형 회귀분석을 실시하였다. 다항식 모델(선형)과 멱급수 모델(비선형)의 적합도를 비교한 결과, 컨테이너선과 벌크선의 경우에는 모든 입력요소에서 멱수급 모델이 적합한 것으로 평가되었다. 하지만 탱커선의 경우에는 수선간장, 선폭, 흘수는 멱수급 모델이 적합하고, 정면풍압면적, 앵커의 무게, 의장수, 묘쇄공으로부터 선저까지의 높이는 다항식 모델이 더 적합한 것으로 평가되었다. 또한 탱커선의 정면풍압면적 요소를 제외한 다른 나머지 종속변수들은 모두 결정계수가 0.7 이상으로 높은 적합도를 보였다. 따라서 주묘 위험성 평가 프로그램의 입력요소 중 외력 요소, 해저 저질, 수심 및 앵커 체인의 신출량을 제외한 나머지 입력요소들은 선박의 총톤수만 입력하면 회귀분석 모델식에 의해 자동으로 입력됨으로써 주묘 위험성 평가가 가능할 것으로 판단된다.

PURPOSES : The purpose of this study is to evaluate the road design elements affecting the lateral driving safety under high-speed driving conditions with a speed limit of 140 km/h and to derive useful implications to design of safer roads. METHODS : A full-scale driving simulator was used to evaluate the various design scenarios. Different regression techniques and a random forest method were adopted to conduct comprehensive comparisons among the simulation scenarios. The relationships between the safety indicators, including the frequency of the lane departures and the standard deviation of the lateral acceleration, and the design elements were explored in terms of lateral driving safety. RESULTS : The length of the combined alignment was found to be a significant factor affecting the lateral driving safety based on the analysis of the frequency of lane departures. Regarding the standard deviation of the lateral acceleration, it was identified that the length of the horizontal curve, the length of the bridge, and the right-side superelevation must be considered significant factors associated with driving safety while designing the road under high-speed driving conditions. CONCLUSIONS : Based on the findings of this study, a set of recommendations for designing roads was proposed. For example, the proper length of the combined alignment and the horizontal curve should be determined to prevent crashes due to hazardous lateral driving events because the installation of sufficient superelevation in the bridge section would be limited under high-speed driving conditions. In addition, applying a larger horizontal curve radius with longitudinal grooving is a promising approach to tackle risky driving conditions.

In the event of an earthquake, non-structural components require seismic performance to ensure evacuation routes and to protect lives from falling non-structural components. Accordingly, the seismic design code proposes horizontal force for the design and evaluation of non-structural components. Ground motion observed on each floor is affected by a building's eigen vibration mode. Therefore, the earthquake damage of non-structural components is determined by the characteristics of the non-structural component system and the vibration characteristics of the building. Floor response spectra in the seismic design code are estimated through time history analysis using seismic waves. However, it is difficult to use floor response spectra as a design criterion because of user-specific uncertainties of time history analysis. In addition, considering the response characteristics of high-rise buildings to long-period ground motions, the safety factor of the proposed horizontal force may be low. Therefore, this study carried out the horizontal force review proposed in the seismic design code through dynamic analysis and evaluated the floor response of seismic waves considering buildings and predominant periods of seismic waves.

Tomb of King Muryeong, located in Sonsan-ri, was found vulnerable due to leakages during since the summer of 2016. This research aims to evaluate structural safety of the Tomb under the tumulus. Site surveys were conducted to find vulnerable inner parts. Structural safety assessment is presented based on both site survey results and analytical results obtained through FEM analysis using the ANSYS program. The underground structure was explicitly modeled to focus on two types of loadings: design loads and actual gravity loads. In general, the tomb does not show any critical deflection increase or damage through the analytical investigation. However, maintenance through continuous monitoring is necessary to prevent severe deflections and stress concentrations since the rigidity of the tomb materials are very vulnerable and likely to be reduced due to prolonged weathering and continuous rain leakage.

본 논문에서는 유한요소해석을 이용하여 흉요추 후방 고정술의 고정분절 변화에 따른 척추 안정성을 평가하였다. 이를 위해 추간판, 인대, 추간관절(Facet joint) 등을 포함한 정상 흉요추(T10–L4)의 유한요소모델을 구축하였으며, 문헌으로 보고된 재료물성치를 부여하였다. 한편, L1을 병변 부위로 가정하였으며, L1-L2, T12-L2, T12-L1-L2 총 3가지 종류의 후방 고정술을 흉요추 유한요소모델에 구현하고 전방 굽힘, 후방 굽힘, 측면 굽힘, 축 회전의 하중 조건을 부여하였다. 시리즈 유한요소해석을 통해 고정분절에 따른 척추경 나사못, 척추골, 추간판의 변형량, 등가 응력, 운동 범위, 모멘트를 계산하였으며, 그 결과를 바탕으로 척추 안정성을 평가하였다.