PURPOSES : In this study, we evaluated the quality levels of abrasion resistance and freeze-thaw resistance to the surface layer (colored layer) by using an overseas abrasion resistance test method to confirm the quality suitability of the concrete block surface for a domestic production permeable block. METHODS : In this study, a new evaluation item for increased durability apart from the quality standard of the permeable block was considered, namely, evaluation of the durability of the surface layer and the freeze-thaw resistance of the permeable block itself by EN 1338, ASTM C 779, 994, and GR 4009 (KS F 4419). RESULTS : The abrasion resistance test for the permeable block revealed that there were relative differences according to the different test methods. However, it was observed that if the ASTM C 779 test results did not meet the wear resistance quality standards, it did not satisfy ASTM C 944 and EN 1338. The ASTM C 779 test result was analyzed to have the highest objectivity and discernment, and this test method was proposed as a permeable block wear test method. In addition, the freeze-thaw resistance test method by the GR 4007 standard can be measured by strength, so it is possible to evaluate the resistance of the permeable block through this test method. CONCLUSIONS : The abrasion resistance test and freeze-thaw resistance test can contribute to the improvement of the permeable block when added to the current quality evaluation tests.

PURPOSES : This study was conducted to analyze the problems of the permeable block by objectively evaluating the quality of the permeable block and providing basic data to improve the quality and construction defect of the permeable block pavement in accordance with the continuously increasing demand of the permeable block. METHODS : In this study, we evaluated the current quality standard suitability of nine products to evaluate the current quality level of domestic production permeable blocks. The evaluation items were evaluated for surface layer thickness, block dimension, strength, and permeability coefficient, and the Korea Standard suitability for these evaluation items was analyzed. In addition, a three-dimensional finite element analysis was conducted to determine the effect of vehicle load on the deformation of block pavement structure. RESULTS : The results demonstrated that the surface layer (colored layer) thicknesses of domestically produced permeable block products were different according to the quality standards, and the dimensions were evaluated to be excellent for domestic permeable blocks currently being produced and delivered. In addition, the strength and permeability coefficient evaluation result demonstrated that all products meet the strength and permeability coefficient quality standards, but the correlation between these strengths and permeability coefficients is not high. The quality standard of strength and permeability coefficients is evaluated as being sufficiently achieved by domestic production technology. CONCLUSIONS: The intensity and permeability coefficients measured in this study were in line with the quality standards; however, the variable coefficient was found to have a significant difference in the quality control level from a maximum of 26% to a minimum 1.7%.

미국 정부는 2011년 식품안전현대화법(FSMA, Food Safety Modernization Act)을 제정하였으며 단계적으로 실시 및 실시예정에 있다. 이중 농산물안전(Produce Safety) 최종규칙은 농산물 재배, 수확, 포장 및 보관과 관련된 생물학적 위해요소에 초점을 맞추고 있는데, 영농규모 등에 따라 2017년 1월부터 단계적으로 시행되고 있다. FSMA 의 농산물안전 규칙 중 현장에서 준수해야 하는 조항을 55개 선별하여 한국 GAP기준과 비교한 결과, 비교 대상 인 두 개의 기준이 조항별 관리사항에 대해 1:1로 단순비교하기에는 어려운 점이 있으나 상당수의 한국 GAP기준이 대응이 가능하다. 다만 한국 GAP기준은 포괄적 기준으로 평가자에 따라 다른 판단을 할 여지가 많으므로 기준의 세부 사항의 보강이 필요하다. 조항별로 보면, 작업자 안전위생(FSMA Subpart D)에 대하여 한국 GAP기준은 가장 높게 대응이 되며, 그 다음으로는 가축 및 야생 동물(FSMA Subpart I), 건물·장비·도구(FSMA Subpart L), 재배·수확 등의 활동(FSMA Subpart K) 순으로 대응이 되고 있다. 그러나, 농업용수 관리(FSMA Subpart E)와 관리자의 자격 및 교육(FSMA Subpart C)에 대해서는 다소 미 흡한 실정이며, 가축분뇨기반 퇴비 관리(FSMA Subpart F) 에 대해서는 대응이 취약한 편이다. FSMA 규칙은 인증 기준은 아니나, 세계적으로 식품안전의 표준을 선도하는 미국이 제시한 규칙인 만큼 파급력이 상당할 것으로 예상 된다. 따라서 국내 농산물 기준 중 FSMA 규칙에서 강조 하는 미생물적 안전성에 대응하는 기준이 GAP기준이므로 한국 GAP기준의 재검토를 통해 우리 농산물의 품질 향상 및 수출확대에 도움이 되기를 바란다.

본 연구에서는 단지 내 아파트 블록포장 50곳의 현장조사를 통하여 주요 파손형태를 조사하여 공용성을 평가하였다. 공용성 평가결과에 따르면, 조사대상지역에서 9년의 공용연수를 가진 블록포장의 유지관리지수는 7.9에서 8.9사이이며, 블록포장의 상태는 양호한 것으로 나타났다. 따라서 건설교통부 '보도설치 및 관리지침'에 10년으로 제시된 보도의 교체주기는 검토할 필요가 있다는 결론을 도출하였다. 또한 블록포장의 공용성을 객관적으로 평가하기 위해서 일본블록포장협회에서 제시한 유지관리 기준과 건설교통부 '보도설치 및 관리지침'의 유지관리기준을 조합하여 국내 현실에 적합한 유지관리기준을 제시하였다. 외국과 비고할 때 국내의 블록포장의 기준에는 내구성 관련기준과 줄눈채움재 및 모래안정층의 품질관리 기준이 명확히 제시되어 있지 않다. 따라서 블록포장의 기대수명과 유지관리비용을 줄이기 위하여, 본 연구에서는 국내외 기준을 비교하여 이러한 기준들을 국내기준에 포함시킬 것을 제안하였다.

The number of pixel defects including bright and black dots on a panel is one of the critical factors determining the quality of TFT-LCD. Since pixel defects on the TFT-LCD panels are sometimes unavoidable, manufacturers have to inspect the panels so that any panel with an unacceptable number of defects will not be delivered to the buyers. However, the buyers demand for the manufacturers to meet different pixel defects tolerances (acceptable number of pixel defects on a TFT-LCD panel) around central(tight) and peripheral(loose) inspection zones. The disagreement in quality standard among different buyers also cause confusions in screening non-confirmative products and unstable yield of production. Few research has focused on the effects of defect locations on a TFT-LCD panel on their detection probabilities and the rational division of defect inspection zones. In this research, experiments were conducted to find the detection probabilities of black dot defects with respect to their varying locations on a TFT-LCD. It is proposed a rational division of inspection zone on a TFT-LCD panel on the basis of detection probabilities of the defects. With these division of inspection zones and the mean defect detection probability within each zone, it is expected to establish a more reasonable pixel defects tolerances.

Cold-mixed asphalt concrete is used to resurface locally damaged area as patching technique. However, due to the durability of Cold-mixed asphalt concrete, resurfacing needs recur for the patching conducted area. Throughout marshall stability tests, residual stability tests, and wheel tracking tests of 12 different resurfacing materials, additional quality standards were suggested in this study such as higher than 7350N in stability test, air void range from 3% to 10%, and 750/mm in dynamic stability.

There are some international standards and organization controling the quality characteristics of varieties and seeds such as UPOV, OECD, ISTA, AOSA. The National List system to check variety performance such as quality characteristics of plant varieties and seeds was established by each countries. The UPOV (International Union for the Protection of New varieties of Plant) regulates the requirement of plant variety protection that is distinctness (D), uniformity (U), stability (S) (here in after called DUS), Novelty and Denomination, and some quality characteristics are used to examine the requirement of plant variety protection by each crops. OECD (Organization for Economic Cooperation Development) seed scheme regulates the seed certification for seed trade between countries. ISTA (International Seed Testing Association) and AOSA(Association for Official Seed Analyst) regulates the seed analysis standard and methods. Most of the countries in Europe has the National List system, which check the value for cultivation and use(VCU), that is to say, variety performance such as yield, quality and stress to environment. All the seeds should be enlisted in the National List before sell the seed in their country. All the quality characteristics checked variety performance are for instance, amylose and amylopectin content in rice, molting quality, β -glucan, protein in barley, protein and sugar content in soybean, sugar and amylopectin content in corn etc. Conditions for the protection of new variety of plant are DUS. Quality characteristics may be the important characteristics and used to check DUS in crop by crop. It is very important to develop a new characteristics and establish standard method fur examine the VCU and DUS test for each crop.