Welding is a representative processing technology applied in many industrial sites due to its quality and convenience. In particular, fiber laser welding can be welded at a faster speed compared to arc welding, and there is an advantage in welding distortion, which is the most significant disadvantage of welding. In this study, the weldable thickness was predicted, and the optimal welding angle was estimated using simulations during the welding of the T-shape structure. The multi-layer heat source model proposed in the previous author's study was used, and the study was conducted using the proposed welding heat source under specific conditions of 4kw and 1.0m/min. As a result, it was predicted that high-quality welding would be possible when the thickness was 3mm or 4mm, and it was also confirmed that welding should be performed at an angle of 82.5° or more when welding a 3mm thick structure. As a follow-up study, we plan to build a welding heat source model under various conditions and conduct a study to derive welding conditions at various thicknesses.

In this study, a finite element analysis was used to analyze the stress state and vibration characteristics generated by continuous contact between wheels and rails when driving urban railway vehicles. The rails applied to the analysis were divided into straight and curved shapes, and three-dimensional modeling was performed to analyze the changes in structural characteristics of wheels and rails when driving on straight and curved rails. As a result of the analysis, the stress characteristics were up to 6.5 MPa on a straight rail and 9.81 MPa on a curved rail, and it is believed that this increase in stress will increase noise due to an increase in friction at the interface. The vibration characteristics of the wheels and rails showed similar behavior from the 3rd mode to the 9th mode of the rail to the intrinsic vibration characteristics from the 4th mode to the 6th mode of the wheel.

경험식에 기반한 폭발 해석방법은 폭압-시간 이력곡선을 하중으로 적용하여 해석하는 방법이다. 이 방법은 모델링이 간단하고 해 석시간이 짧아 효율적이지만, 일부 연구에 따르면 근거리 폭발 해석에는 적합하지 않음이 보고되고 있다. 본 연구에서는 예로써 환산 거리 0.4~1.0의 근거리 폭발조건에 있는 RC 보에 대해 해석방법에 따른 결과의 차이 및 원인을 분석하였고, 이를 통해 경험식 방법을 이용한 해석의 적용 범위를 구체적으로 검토 및 확인할 수 있었다. 사용된 유한요소해석 프로그램은 LS-DYNA이다. 해석결과에 따르 면, 원거리 폭발 실험 데이터를 근거로 하는 경험식 해석방법은 충격량을 과소평가하고 있었다. 이로 인해 RC 보의 처짐은 측정된 처 짐 또는 ALE(Arbitrary Lagrangian Eulerian) 해석결과에 비해 작게 계산되었다. 구조체의 응답이 크게 나타나는 근거리 폭발에 대해 서는 ALE 해석방법을 사용하는 것이 더 적합할 것으로 사료된다.

Existing reinforced concrete building structures constructed before 1988 have seismically-deficient reinforcing details, which can lead to the premature failure of the columns and beam-column joints. The premature failure was resulted from the inadequate bonding performance between the reinforcing bars and surrounding concrete on the main structural elements. This paper aims to quantify the bond-slip effect on the dynamic responses of reinforced concrete frame models using finite element analyses. The bond-slip behavior was modeled using an one-dimensional slide line model in LS-DYNA. The bond-slip models were varied with the bonding conditions and failure modes, and implemented to the well-validated finite element models. The dynamic responses of the frame models with the several bonding conditions were compared to the validated models reproducing the actual behavior. It verifies that the bond-slip effects significantly affected the dynamic responses of the reinforced concrete building structures.

이 논문에서는 이동하는 질량체의 연직 방향에 대한 관성 효과를 고려하여 보의 진동을 해석할 수 있는 유한요소해석 방법을 제안 한다. 제안하는 방법은 정밀한 상호작용 해석을 요하지 않는 경우에 계산의 효율성을 높이는 방법으로서, 이동하는 질량체의 관성 효 과를 운동방정식에 연계시키고 질량체와 보의 상호작용력은 외부 하중으로만 고려한다. 범용 유한요소해석 소프트웨어인 Abaqus를 이용하여 시간 영역 해석을 수행하고 보의 절점과 이동하는 강체 질량의 절점 변위를 다지점 구속조건으로 연계하여 해석하는 방법 을 제시하였다. 기존 해석적 방법에 의한 해와 비교하여 제안하는 방법을 검증하고 보행하중 모델을 이용한 이동 보행 하중해석에서 보행자의 질량 효과를 살펴보기 위한 간단한 연속 보 모델에 대한 해석 결과를 제시하였다.

Various optical devices are utilized to fire artillery in Korean Army. To transport and store the optical devices, some cases are made up for a set. The covers of cases are made of Glass Fiber Reinforced Plastic(GFRP) and resin. Because of materials of case, it has a disadvantage in productivity for manufacturing covers and assembling components. In this study, ABS resin is presented for alternative and verify possibility through FEM analysis. Comparing with GFRP, max stress-ratio of ABS is decreased 19.6% for bottom, 8.2% for side and 25.4% for edge. Also each strain is changed 17.3%, 180.3% and 17.7%. According to the research results, ABS resin is considered possible for alternative. And the number of components is decreased for around 73.8%.

본 논문에서는 유한요소해석 프로그램 Abaqus를 이용하여 고온과 편심 축하중을 받는 세장한 철근 콘크리트 기둥의 유한요소해석 절차를 제시하고 해석 결과를 비교･분석하였다. 기둥에 축하중과 화재가 가해지는 상황을 해석에 반영하기 위해 Abaqus에서 제공하 는 순차 결합 열-응력 해석을 사용하였다. 우선 콘크리트 단면에 대한 열전달 해석을 수행하여 검증한 뒤, 이를 3차원 요소로 확장하고 구조해석과 결합하여 해석을 수행하였다. 해석 과정에서 수렴성 및 정확성에 영향을 미치는 인장 증강 효과와 초기 불완전성을 고려 하여 모델링하였다. 해석 결과는 74개 실험 데이터와 비교하였으며, 내화시간을 기준으로 평균 6%의 오차를 나타냄에 따라 유한요소 해석을 통해 철근콘크리트 기둥의 내화성능을 예측할 수 있게 되었다.

본 논문은 FRP 그리드로 보강된 콘크리트 보의 휨 성능을 예측하기 위한 해석적 연구결과를 제시한다. FRP 그리드 로 보강된 콘크리트 보의 휨 성능 예측을 위해 상용구조해석 프로그램인 LS-DYNA를 이용하여 유한요소해석이 수행되었다. 유 한요소해석 시 콘크리트와 FRP 그리드 간의 본드-슬립을 고려하였으며, 콘크리트와 FRP 그리드의 구속조건은 BEAM_IN_SOLID 모델이 적용되었다. 이후, 국내 여러 연구자들에 의해 수행된 실험 결과의 재현해석을 통해 제안된 유한요소해석 모델의 정확성 이 검증되었다. 최대하중, 최대하중 시의 변위 실험값에 대한 해석값의 비는 각각 0.990, 0.924, 표준편차 각각 0.056, 0.087로 제 안된 해석모델은 FRP 그리드로 보강된 콘크리트 보의 휨 성능을 잘 예측할 수 있는 것으로 나타났다. 제안된 유한해석모델을 이용하여 콘크리트 보의 인장재로 철근이 아닌 CFRP그리드를 적용하기 위한 매개변수해석이 수행되었으며, 콘크리트 압축강도, FRP그리드의 겹 수, FRP그리드의 유효깊이는 CFRP그리드로 보강된 콘크리트 부재의 휨성능에 중요한 인자임을 확인하였다.

본 논문에서는 유한요소해석을 통한 모듈러 구조물 접합부의 힌지접합부 연구에 관하여 소개한다. 모듈러 구조물은 모듈과 모듈을 적층하는 방식으로 공사를 진행하여 단위 모듈간의 기둥 및 보의 일체성을 기대하기 어려운 특성을 가지고 있다. 그러나 현 모듈러 설 계 시 이러한 구조적 특성을 무시하고 횡력에 대한 모멘트전달을 고려하여 기존 강구조와 동일한 방식으로 해석하고 있다. 더구나 모 멘트접합을 체결하기위해 모듈러 외부뿐만 아니라 내부에서 볼트 체결이 이루어져 조립 후 마감을 추가하는 불합리한 상황도 발생한 다. 이러한 일체성을 기대하기 어려운 특성을 고려하기 위하여 힌지접합을 활용한 모듈러구조시스템을 제안하였다. 논문에서는 기존 의 모멘트접합부에서 힌지접합부로 변경하였을 때 하중의 전달을 확인하기 위하여 이전 다른 연구에서 활용되었던 가위 모델을 변형 한 변형 가위 모델을 고안하여 접합부의 기본 이론을 제안·검토하였고, 기본을 바탕으로 계산된 결과는 구조해석 프로그램인 마이다 스 젠과 비교하여 검증하였다. 추가적으로 기존 모멘트접합부로 설계되었던 모듈러구조물을 힌지접합부로 변경하여 부재내력 및 사 용성을 검토하였다.

This paper presents the effect on the inelastic behavior and structural performance of concrete and filled steel pipe through a numerical method for reliable judgment under various load conditions of the CJS composite structural system. Variable values optimized for the CJS synthetic structural system and the effects of multiple variables used for finite element analysis to present analytical modeling were compared and analyzed with experimental results. The Winfrith concrete model was used as a concrete material model that describes the confinement effect well, and the concrete structure was modeled with solid elements. Through geometric analysis of shell and solid elements, rectangular steel pipe columns and steel elements were modeled as shell elements. In addition, the slip behavior of the joint between the concrete column and the rectangular steel pipe was described using the Surface-to-Surface function. After finite element analysis modeling, simulation was performed for cyclic loading after assuming that the lower part of the foundation was a pin in the same way as in the experiment. The analysis model was verified by comparing the calculated analysis results with the experimental results, focusing on initial stiffness, maximum strength, and energy dissipation capability.

This study proposed a simplified finite element analysis procedure for designing the nonstructural masonry wall in the out-of-plane direction. The proposed method is a two-step elastic analysis procedure by bilinearizing the behavior of the masonry wall. The first step analysis was conducted with initial stiffness representing the behavior up to the effective-yield point, and the second step analysis was conducted with post-yield stiffness. In addition, the orthotropic material property of the masonry was considered in the FE analysis. The maximum load was estimated as the sum of the maximum loads in the first and second step analyses. The maximum load was converted into the moment coefficients and compared with those from the yield line method applied in Eurocode 6. The moment coefficients calculated through the proposed procedure showed a good match with those from the yield line method with less than 6% differences.

Gas springs applied to various industrial fields are generally composed of a cylinder, a piston rod, a cover, and a seal mount. Because of the thin wall of the cylinder, small gas springs are manufactured using a roller forming process that presses the cylinder wall into a groove of cover in the cylinder. In this study, finite element analysis and process design of roller forming are performed to systematically manufacture the small gas spring and develop a roller forming machine. In order to perform roller forming analysis, tensile tests of structural steel pipe are performed and mechanical properties are analyzed. Roller forming process parameters such as radius and depth of roller grooves are derived using the incompressible condition of plastic deformation theory and the results of finite element roller forming analysis. Using the derived roller shape, a roller forming machine is developed and prototypes of the small gas spring are manufactured. Finally, the dimensional accuracy of the manufactured gas spring prototypes is analyzed through three-dimensional shape measurement.

본 논문에서는 우리나라의 중저준위 방폐물 처분을 위한 사일로 형식 지하동굴의 유한요소해석을 수행하였다. 사일로의 벽체부분 은 지름 25m의 원형구조이고, 높이는 35m이다. 사일로의 천장부분은 지름 30m의 돔 형식이고, 높이 17.4m의 규모이다. 사일로는 해 수면으로부터 –80m에서 –130m에 위치하고 있다. 중저준위 방폐물 처분 1단계 시설로 6개의 사일로가 건설되어 운영되고 있으나, 본 연구에서는 1개의 사일로에 대해서 고려하였다. SMAP-3D 프로그램을 사용하여 2차원 축대칭 유한요소모델과 3차원 유한요소모델 을 생성하였다. Generalized Hoek and Brown Model이 수치해석에 적용되었다. 다양한 측압계수(수평방향 현장응력과 수직방향 현장 응력의 비)의 변화에 따른 사일로 형식 지하동굴의 유한요소해석을 수행하였으며, 수치해석결과 및 분석결과가 제시되었다.

Due to environmental pollution, regulations on existing petroleum-based fuels are increasing day by day. LNG is in the spotlight as an eco-friendly fuel that does not emit NOx or SOx, but its boiling point is -163°C, so it needs to be handled with care. Materials that can be used at the above temperature are defined by IMO through the IGC Code. Among them, 9% nickel steel has great advantages in yield strength and tensile strength under cryogenic conditions, but it is difficult to use in arc welding such as FCAW for various reasons. This study is a study to apply fiber laser welding to solve this problem. As a previous study, this study conducted a study to find a welding heat source. After performing bead on plate welding, the optimal heat source was derived by analyzing the shape of the bead and adjusting the parameters of the heat source model. In this case, by applying the multi-island genetic algorithm, which is a global optimization algorithm, not the intuition of the researcher, accurate results could be derived in a wide range.

ROPS is a structure installed to protect drivers from tractor rollover accidents and is being tested for certification under the OECD code. Because this test requires a lot of cost and time to develop the ROPS and to produce test model, the OECD is discussing the introduction of virtual test using finite element analysis. In this study, the results were compared by conducting a strength test and finite element analysis applied with the OECD code to use it as a basic data for standardization of ROPS virtual test methods. It was confirmed that the results of the analysis of the bolts and plates of the coupling part and the folding part were more close to the physical test results than the rigid elements and constraints at the point of coupling the tractor and ROPS.

This study develops finite element models for seismically-deficient reinforced concrete building frame retrofitted using fiber-reinforced polymer jacketing system and validates the finite element models with full-scale dynamic test for as-built and retrofitted conditions. The bond-slip effects measured from a past experimental study were modeled using one-dimensional slide line model, and the bond-slip models were implemented to the finite element models. The finite element model can predict story displacement and inter-story drift ratio with slight simulation variation compared to the measured responses from the full-scale dynamic tests.

In this study, the seismic safety of nuclear power plant structures is evaluated and verified by performing a vibration test on a relatively simple shear wall structure. The shear walls are the prominent members of nuclear power plants and resist the seismic load. The shear wall structure is designed and manufactured to perform shaking table tests and is used to increase the accuracy of the analytical method by comparing them with the numerical analysis results. Different results will be checked and more efficient application methods will be studied depending on the method of designing reinforced concrete structures.