In this study, the structural analysis and welding performance experiments were performed to reduce the weight of the semi-automatic TIG welding device. The structural analysis based on finite element method was performed on the lightweight design of the wire feeder's main frame to evaluate the structural safety and straightness of the lightweight frame. To reduce the weight of the welding wire feeder, the step motor was changed to a servo motor and a pinion gear made of lightweight reinforced plastic material was applied. In addition, a new type of welding torch was developed to reduce the weight of the welding torch and to supply more effective fillers. As a result of performing the TIG welding experiment using a prototype of TIG welding device consisting of a lightweight frame, feeding device and welding torch, it was confirmed that the working criteria were satisfied in terms of welding speed, welding bead shape, feeding uniformity and torch durability. The developed lightweight TIG welding device is expected to improve welding productivity and work convenience.

물 유거(Run-off)에 따른 토양유실량을 자동정량하고자 ISCO 6712 수질환경 종합측정장치를 이용하여 토양유실량 추정장치를 고안하였고, 이 장치를 통해 실시간으로 유실되는 토양량을 추정할 수 있었다. 토양유실량 추정장치는 ISCO 6712 장치에 수위계(ISCO 730), 우량계(ISCO 674) 그리고 흙탕물을 받는 저수조 내에 층위 별로 흙탕물을 자동으로 채취할 수 있는 시설을 추가하였다. 1 × 5 m2 크기, 경사 15 %의 라이시미터(lysimeter) 내 석비레(Saprolite) 토양에 옥수수를 심어 실험한 결과 2017년 1회 강우량 161.3 ㎜의 강우사상에서는 실측 토양유실량의 85.1%, 82.6 ㎜ 강우사상에서는 101.7 %의 토양량을 추정하였다.

In order to secure competitiveness of companies in the semiconductor industry, state management of equipment is one of the most important key factors. Particularly, after carrying out preventive maintenance (PM) work to maintain the best equipment condition, process reliability inspection is carried out. This work must be performed manually by the intervention of the operator. This inspection work is becoming more and more difficult due to the difficulty of the manufacturing worker, the increase of the simple repetitive workload, and the increase of the inspection items for the engineer, as the condition and the procedure continuously change as the semiconductor scaling down. Therefore, we would like to carry out an empirical study on the construction of an automatic inspection system in order to carry out the more reliable and efficient inspection procedure by eliminating the problems and unreasonableness of the past based on the investigation and analysis of the work procedures and conditions of the existing manual method.

Wire rods having various sectional shape are generally used in various applications. In a 2-roll shape rolling process, step-by-step rolling operations are executed repeatedly and the rollers must be changed whenever the sectional shape of wire rod is changed. The frequent changes of the rollers and discontinuous repeated operations are cause various shortcomings such as increase of manufacturing cost and reduction in precision. We had developed a high precision automatic wire rod manufacturing system to reduce these shortcomings in the previous study. In this study, we evaluated the field application performance of the developed system in terms of straightness, thickness deviation, surface precision, tensile and hardness of the wire rod in order to verify the feasibility of the system.

The purpose of this study was to produce a prototype after performing the design for the traditional flooring Hanji after coating. It performs the following test results were as follows. The prototype was commissioned to establish optimal coating conditions through. The production of high quality flooring can be produced after the year 192,000 sheets. Largely due to the coating operation to improve hand and contributed to improving the working environment.

Wire rods having various sectional shape are generally used directly in various applications. In the shape rolling, a couple of grooved rollers are used and the groove match the sectional shape of the wire rod. In this 2 roll system, a couple of rollers must be changed whenever the sectional shape of the wire rod is changed, and the frequent changes of roller cause rise of manufacturing cost. In this study, in order to apply a highly precise 4 roll rolling mill developed in previous studies on the shape rolling manufacturing process, the raw wire feeding equipment, 2 roll rolling mill, turks Head rolling mill, large heat treatment equipment, a steam cleaning equipment, a large winding equipment, cooling equipment, a tension adjustment equipment, designed and manufactured to the main control system. In addition, the problems corrected throughout these various equipments for manufacturing high-precision automatic rolling mill system developed by assembling more than six months and was conducted between complementary and testing process.

Through the inspector's real name to improve the quality of inspection is to show the design Radiological examination pursuant to the Ordinance of the Ministry of Health and Welfare for patient safety in the Image. However, the use of existing and in EMR, equipment within the handwriting input, the individual initial use has a problem. In this study, increasing the stability of the patient and the precise inspection, In order to increase the efficiency and convenience than the real-name system for quality control inspectors of medical equipment, Using the EMR and PACS developed and applied to evaluate the usefulness of automatic enrollment. Enter your information in the EMR, which was developed markers that inspectors use to compare the before and after images PACS satisfaction. Convenience than using traditional, consistency, the entry of the missing were higher as a statistically significant difference. A test strip automatic enrollment programs are developed in this study. You can increase the stability of the patient by checking the image to show the real tester, we expect the quality of care would be improved.

Automatic continuous manufacturing system is necessary to raise the productivity and strengthen the competitiveness in the wire manufacturing. The automatic wire cutting technology is an important element to link various processes and it is crucial technology to obtain high accuracy and quality of the wire. This study was performed to develop an automatic stainless steel wire cutting equipment that is consist of the first and second cutting equipments besides related devices to cut stainless steel wire. This wire cutting equipment can cut wire with high accuracy, and it can prevent sintering and discoloration

본 연구는 식물공장의 각 공정 간을 연결하는 육묘라인을 폐쇄형 레일로 설정하고, 그 레일 상에서 구름바퀴 이동을 하는 육묘베드가 있고, 이 육묘 베드위의 일정위치에 육묘트레이를 자동으로 올려놓는 자동적재장치를 개발하기 위하여 수행되었다. 이 장치의 개발을 위한 기초시험으로 바닥재 위에 육묘트레이를 올려놓고 밀기이송을 하는 시험을 실시하고, 밀기이송력의 변화를 측정 분석하여 최적의 육묘트레이 자동적재장치를 개발하였다. 바닥 위에 파종완료한 트레이를 올려놓고 밀기 이송을 할 때 최대 이송력은 이송속도 30 cm/s에서 트레이 3개를 이송할 때로 초기이송시점에서 최대 피크이송력과 초기 과도상태 이후 최대 정상상태 이송력이 각각 바닥재료가 고무판에서는 32.8 N, 29.4 N, 목재판 29.7 N, 22.5 N, 아크릴판 26.9 N, 19.6 N, 철판 27.6 N, 19.1 N으로 나타났다. 이 이송력의 변화는 모노레일 컨베이어가 트레이와 충돌 직후 최대로 발생했으며, 이후 점차 줄어들어 안정적으로 변화되는 것으로 나타났다. 트레이를 2개 이상 맞대어 밀기이송 시 트레이 외각 받침날의 겹침현상이 일어났다. 최종적으로 개발한 육묘 트레이 적재이송장치는 100회의 작동시험 결과 작동에러는 없었으며, 최대 육묘트레이 적재이송 작업속도는 2초/매, 트레이 이송위치 최대오차는 0.5 cm로 나타났다.

This study was conducted to propose a way to increase the accuracy and precision of β-ray measurement equipment. Statistical processing results of equivalent evaluation data from 2016 to 2021 confirmed that the concentration of micro dust measured by β-ray measurement equipment was higher than that of micro dust sampler. According to quarterly data, it was confirmed that the data from the third quarter (July to September) showed a different trend from other periods, which is assumed to be due to weather conditions. This study indicates that automatic micro-dust measurement equipment evaluation at air pollution measuring stations during the third quarter should be excluded. The evaluation cycle should be changed from once every two years to quarterly. In addition, when the criterion for determining equivalence evaluation falls within the range of the slope and intercept values of the existing trend line, it is necessary to evaluate the R2 value together and reduce the slope from 0.9-1.1 to 0.9-1.0.