In this investigation, we synthesized a novel quaternary nanocomposite, denoted as RGO-Ba(OH)2/CeO2/TiO2, through a straightforward and cost-effective solid-state synthesis approach. The as-prepared composites underwent a series of comprehensive characterizations, including XRD, FTIR, TGA-DTA, XPS, SEM, EDAX, and TEM analyses, affirming the successful synthesis of a quaternary nanocomposite with well-interconnected nanoparticles, nanorods, and sheet-like structures. Further, our electrochemical performance evaluations demonstrated that the electrochemical capacitance of the RGO-Ba(OH)2/CeO2/ TiO2 nanocomposite achieved an impressive value of 445 F g− 1 at a current density of 1.0 A g− 1, particularly when the mass ratio of CeO2 and TiO2 was maintained at 90:10. Furthermore, the specific capacitance retained a remarkable 65% even after 2000 cycles at a current density of 6 A g− 1 in a 3 mol KOH electrolyte. Comparatively, this outstanding electrochemical performance of the RGO-Ba(OH)2/CeO2/TiO2 (90:10) nanocomposite can be attributed to several factors. These include the favorable electrical conductivity and large specific surface area provided by graphene, TiO2, and Ba(OH)2, the enhanced energy density and extended cycle life resulting from the presence of CeO2, and the synergistic contributions among all four components. Therefore, the RGO-Ba(OH)2/CeO2/TiO2 nanocomposite emerges as a highly promising electrode material for supercapacitors.

Composite-based piezoelectric devices are extensively studied to develop sustainable power supply and selfpowered devices owing to their excellent mechanical durability and output performance. In this study, we design a leadfree piezoelectric nanocomposite utilizing (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 (BCTZ) nanomaterials for realizing highly flexible energy harvesters. To improve the output performance of the devices, we incorporate porous BCTZ nanowires (NWs) into the nanoparticle (NP)-based piezoelectric nanocomposite. BCTZ NPs and NWs are synthesized through the solidstate reaction and sol-gel-based electrospinning, respectively; subsequently, they are dispersed inside a polyimide matrix. The output performance of the energy harvesters is measured using an optimized measurement system during repetitive mechanical deformation by varying the composition of the NPs and NWs. A nanocomposite-based energy harvester with 4:1 weight ratio generates the maximum open-circuit voltage and short-circuit current of 0.83 V and 0.28 A, respectively. In this study, self-powered devices are constructed with enhanced output performance by using piezoelectric energy harvesting for application in flexible and wearable devices.

The effects of La3+ substitution for Sr2+-site on the crystal structure and the dielectric properties of (Ba0.7Sr0.3-3x/2Lax) (Ti0.9Zr0.1)O3 (BSLTZ) (0.005 ≤ x ≤ 0.02) ceramics were investigated. The structural characteristics of the BSLTZ ceramics were quantitatively evaluated using the Rietveld refinement method from X-ray diffraction (XRD) data. For the specimens sintered at 1,550 °C for 6 h, a single phase with a perovskite structure and homogeneous microstructure were observed for the entire range of compositions. With increasing La3+ substitution (x), the unit cell volume decreased because the ionic size of La3+ (1.36 Å) ions is smaller than that of Sr2+ (1.44 Å) ions. With increasing La3+ substitution (x), the tetragonal phase fraction increased due to the A-site cation size mismatch effect. Dielectric constant (εr) increased with the La3+ substitution (x) due to the increase in tetragonality (c/a) and the average B-site bond valence of the ABO3 perovskite. The BSLTZ ceramics showed a higher dielectric loss due to the smaller grain size than that of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 ceramics. BSLTZ (x = 0.02) ceramics met the X7R specification proposed by the Electronic Industries Association (EIA).

During the initial cooling period of spent nuclear fuel, Cs-137 and Sr-90 constitute a large portion of the total decay heat. Therefore, separating cesium and strontium from spent nuclear fuel can significantly decrease decay heat and facilitate disposition. This study presents analytical technique based on the gas pressurized extraction chromatography (GPEC) system with cation exchange resin for the separation of Sr, Cs, and Ba. GPEC is a micro-scaled column chromatography system that allows for faster separation and reduction volume of elution solvent compared to conventional column chromatography by utilizing pressurized nitrogen gas. Here, we demonstrate the comparative study of the conventional column chromatography and the GPEC method. Cation exchange resin AG 50W-X12 (200~400 mesh size) was used. The sample was prepared at a 0.8 M hydrochloric acid solution and gradient elution was applied. In this case, we used the natural isotopes 88Sr, 133Cs, and 138Ba instead of radioactive isotopes for the preliminary test. Usually, cesium is difficult to measure with ICP-OES, because its wavelengths (455.531 nm and 459.320 nm) are less sensitive. So, we used ICP-MS to determine the identification and the recovery of eluate. In this study, optimized experimental conditions and analytical result including reproducibility of the recovery, total analysis time and volume of eluents will be discussed by comparing GPEC and conventional column chromatography.

In this article, Pb2Ba1.7Sr0.3Ca2Cu3O10+δ superconductor material was synthesized using conventional solid-state reaction method. X-ray diffraction (XRD) analysis demonstrated one dominant phase 2223 and some impurities in the product powder. The strongest peaks in the XRD pattern were successfully indexed assuming a pseudo-tetragonal cell with lattice constants of a = 3.732, b = 3.733 and c = 14.75 Å for a Pb-Based compound. The crystallite size and lattice strain between the layers of the studied compound were estimated using several methods, namely the Scherrer, Williamson-Hall (W.H), sizestrain plot (SSP) and Halder Wagner (H.W) approach. The values of crystallite size, calculated by Scherrer, W.H, SSP and H.W methods, were 89.4540774, 86.658638, 87.7555823 and 85.470086 Å, respectively. Moreover, the lattice strain values obtained by W.H, SSP and H.W methods were 0.0063240, 0.006325 and 0.006, respectively. It was noted that all crystallite size results are consistent; however, the best method is the size-strain plot because it gave a value of R2 approaching one. Furthermore, degree of crystallites was calculated and found to be 59.003321%. Resistivity analysis suggests zero-resistance, which is typical of superconducting materials at critical temperature. Four-probe technique was utilized to measure the critical temperature at onset Tc(onset), zero resistivity Tc(off set), and transition (width ΔT), corresponding to temperatures of 128 K, 116 K, and 12 K, respectively.

This paper makes a detailed description and analysis of the syntactic function and semantic orientation of “Ba+O+V”, and draws the following conclusions: a. “Ba+O+V” has various syntactic functions. Besides being a predicate to form the Ba Sentence, it can also be a subject, an object, a prepositional object, an attribute, a complement, etc. In addition, it can also form the De phrase with De, and form the location phrase with some location words. It presents different structural features in different syntactic positions. b. “Ba+O+V” is the most free when it acts as predicate, and is more or less limited in structure when it is used as other syntactic components，so the frequency of it in different syntactic positions is different. c. Because “Ba+O+V” can appear in different syntactic positions in the sentence, it can be semantically related to different components in the sentenc e，showing the diversity of its semantic direction. d. In teaching Chinese as a foreign language, we can’t just limit ourselves to the teaching of Ba sentence with “Ba+O+V” as the predicate. In order to improve students’ overall understanding of the function of “Ba+O+V”, we should also pay attention to the explanation of the usage of it in the non predicate position, so as to effectively improve their practical application ability.

NKN [(Na,K)NbO3] is a candidate lead-free piezoelectric material to replace PZT [Pb(Zr,Ti)O3]. A single crystal has excellent piezoelectric-properties and its properties are dependent of the crystal orientation direction. However, it is hard to fabricate a single crystal with stoichiometrically stable composition due to volatilization of sodium during the growth process. To solve this problem, a solid solution composition is designed (Na,K)NbO3-Ba(Cu,Nb)O3 and solid state grain growth is studied for a sizable single crystal. Ceramic powders of (Na,K)NbO3-M(Cu,Nb)O3 (M = Ca, Sr, Ba) are synthesized and grain growth behavior is investigated for different temperatures and times. Average normal grain sizes of individual specimens, which are heat-treated at 1,125 oC for 10 h, are 6.9, 2.8, and 1.6 m for M = Ca, Sr, and Ba, respectively. Depending on M, the distortion of NKN structure can be altered. XRD results show that (NKN-CaCuN: shrunken orthorhombic; NKN-SrCuN: orthorhombic; NKN-BaCuN: cubic). For the sample heat-treated at 1,125 oC for 10 h, the maximum grain sizes of individual specimens are measured as 40, 5, and 4,000 m for M = Ca, Sr, and Ba, respectively. This abnormal grain size is related to the partial melting temperature (NKN-CaCuN: 960 oC; NKN-SrCuN: 971 oC; NKN-BaCuN: 945 oC).

A lead-free bulk ceramic having a chemical formula Ba0.8Ca0.2(Ti0.8Zr0.1Ce0.1)O3 (further termed as BCTZCO) is synthesized using mixed oxide route. The structural, dielectric, impedance, and conductivity properties, as well as the modulus of the synthesized sample are discussed in the present work. Analysis of X-ray diffraction data obtained at room temperature reveals the existence of some impurity phases. The natural surface morphology shows close packing of grains with few voids. Attempts have been made to study the (a) effect of microstructures containing grains, grain boundaries, and electrodes on impedance and capacitive characteristics, (b) relationship between properties and crystal structure, and (c) nature of the relaxation mechanism of the prepared samples. The relationship between the structure and physical properties is established. The frequency and temperature dependence of the dielectric properties reveal that this complex system has a high dielectric constant and low tangent loss. An analysis of impedance and related parameters illuminates the contributions of grains. The activation energy is determined for only the high temperature region in the temperature dependent AC conductivity graph. Deviation from the Debye behavior is seen in the Nyquist plot at different temperatures. The relaxation mechanism and the electrical transport properties in the sample are investigated with the help of various spectroscopic (i.e., dielectric, modulus, and impedance) techniques. This lead free sample will serve as a base for device engineering.

There are several manufacturing techniques for developing thermionic cathodes for vacuum ultraviolet(VUV) ionizers. The triple alkaline earth metal emitters(Ca-Sr-Ba) are formulated as efficient and reliable thermo-electron sources with a great many different compositions for the ionizing devices. We prepare two basic suspensions with different compositions: calcium, strontium and barium. After evaluating the electron-emitting performance for europium, gadolinium, and yttrium-based cathodes mixed with these suspensions, we selected the yttrium for its better performance. Next, another transition metal indium and a lanthanide metal neodymium salt is introduced to two base emitters. These final composite metal emitters are coated on the tungsten filament and then activated to the oxide cathodes by an intentionally programmed calcination process under an ultra-high vacuum(~10-6 torr). The performance of electron emission of the cathodes is characterized by their anode currents with respect to the addition of each element, In and Nd, and their concentration of cathodes. Compared to both the base cathodes, the electron emission performance of the cathodes containing indium and neodymium decreases. The anode current of the Nd cathode is more markedly degraded than that with In.

Pb(Zr,Ti)O3 (PZT) is used for the various piezoelectric devices owing to its high piezoelectric properties. However, lead (Pb), which is contained in PZT, causes various environment contaminations. (K,Na)NbO3 (NKN) is the most well-known candidate for a lead-free composition to replace PZT. A single crystal has excellent piezoelectric-properties and its properties can be changed by changing the orientation direction. It is hard to fabricate a NKN single crystal due to the sodium and potassium. Thus, (Na,K)NbO3-Ba(Cu,Nb)O3 (NKN-BCuN) is chosen to fabricate the single crystal with relative ease. NKNBCuN pellets consist of two parts, yellow single crystals and gray poly-crystals that contain copper. The area that has a large amount of copper particles may melt at low temperature but not the other areas. The liquid phase may be responsible for the abnormal grain growth in NKN-BCuN ceramics. The dielectric constant and tan δ are measured to be 684 and 0.036 at 1 kHz in NKN-BCuN, respectively. The coercive field and remnant polarization are 14 kV/cm and 20 μC/cm2.

Lead free (Ba0.7Ca0.3) TiO3 thick films with nano-sized grains are prepared using an aerosol deposition (AD) method at room temperature. The crystallinity of the AD thick films is enhanced by a post annealing process. Contrary to the sharp phase transition of bulk ceramics that has been reported, AD films show broad phase transition behaviors due to the nanosized grains. The polarization-electric hysteresis loop of annealed AD film shows ferroelectric behaviors. With an increase in annealing temperature, the saturation polarization increases because of an increase in crystallinity. However, the remnant polarization and cohesive field are not affected by the annealing temperature. BCT AD thick films annealed at 700 ℃/2h have an energy density of 1.84 J/cm3 and a charge-discharge efficiency of 69.9%, which is much higher than those of bulk ceramic with the same composition. The higher energy storage properties are likely due to the increase in the breakdown field from a large number of grain boundaries of nano-sized grains.

Ranunculus asiaticus characterizes colorful and attractive flower shapes that are related with the ornamental value of bulbous plants. Improving ornamental value of bulbous flowers has been the general goal of floricultural market. Gibberellic acid (GA3) and benzyladenine (BA) play an important role in growth and developmental processes in floriculture. Combinational treatments of these two hormones have been used in floriculture to improve flower quality. We assessed the effects of combined GA3 and BA, as well as the individual effects of each hormone, on growth characteristics using soil drench application to eight R. asiaticus cultivars, ‘Giallo Millepetali’, ‘Bianco Millepetali’, ‘Arancio Millepetali’, ‘Rosa SC’, ‘Arancio Pratolino’, ‘Giallo Pratolino’, ‘Bianco Pratolino’, and ‘Rosa Ch Pratolino’. GA3 treatments increased plant height and first flower size of R. asiaticus cultivars. Moreover, about 5 to 9 days to flowering were averagely shortened by GA3 treatments compared to controls. On the other hand, the opposites, including first flower size and days to flowering, were observed for cultivars treated with BA, compared with controls. Treatments of GA3 + BA generally affected growth traits, such as plant height, flower size, and the timing of flowering on some R. asiaticus cultivars. In particular, about 5 to 6 days to flowering were reduced on average by Treatments of GA3 + BA. Our results showed positive growth effects, including plant height, days to flowering, first flower height, number of flowers from the application of individual and combined hormones to R. asiaticus cultivars and demonstrate a role for these hormones in future bulbous floriculture.

In the production of zirconium cladding tube, a pickling acid solution is used to remove surface contaminants, which generates tons of pickling acid waste. The waste pickling solution is a valuable resource of Hf-free Zr. Many studies have investigated separating the Hf-free Zr source from the waste pickling acid. The results showed that Ba2ZrF8 precipitates prepared from the waste pickling acid were useful as an electrolyte for the electrorefining of Zr in molten salt. In the present work, electrorefining was performed in a Ba2ZrF8-LiF binary electrolyte to recover Zr from a Hf-free CuZr ingot anode prepared by electroreduction. Before electrorefining, two pretreatments are performed. First, electrolyte melting was carried out to determine the eutectic temperature, and second, the electrolyte was treated to eliminate impurities, mainly hydride. After electrorefining, the cathode deposits were analyzed by O2 gas analyzer and SEM-EDX to explore the possibility of recovering nuclear-grade Zr metal. Moreover, the anode was analyzed by SEM-EDX to determine the Zr dissolution depth.

In the teaching of Chinese as a foreign language, Ba-construction is a difficult grammar items. In the study of Chinese ontology, there are quite a few articles on Ba-construction, and the study of Ba-construction in Chinese as a foreign language teaching has also achieved remarkable results. In recent years, more and more attention has been paid to the teaching of Ba-construction and based on contrastive analysis or language acquisition research. The study of Ba-construction is gradually developed from the background of the cross-linguistic to the background of specific native language . The students' mother tongue has a great influence on Ba-construction learning. Korean is an Altaic language and Chinese is a Sino-Tibetan language. There is a big difference between the two languages. The deep semantic relations of Chinese language are expressed by superficial syntactic relations of Korean language, and The differences between different semantic types and semantic orientations directly affect its correspondence in Korean language. The Ba-construction with different Semantic type have neat corresponding forms in Korean. However, Korean students try to find the similarity between the sentence pattern and native language in the process of Ba-construction acquisition, so make a lot of error sentences. This paper tries to classify Ba-construction into four categories from the perspective of semantic type and the corresponding characteristics of Korean, and discusses the teaching methods of Ba-construction for korean students.

La1-xBaxMnO3 (x = 0.30, 0.35 and 0.40) samples have been prepared by solid-state reaction method. The X-ray diffraction (XRD) study showed that all the samples crystallized in a rhombohedral structure with an R-3c space group. Variation of the magnetization as a function of the temperature and applied magnetic field was carried out. All the samples revealed ferromagnetic to paramagnetic (FM-PM) phase transition at the Curie temperature TC ~ 342 K. The magnetic entropy change was also studied through examination of the measured magnetic isotherms M(H, T) near TC. The magnetocaloric effect was calculated in terms of the isothermal magnetic entropy change. The maximum entropy change reaches a value of 1.192 J/ kgK under a magnetic field change of 2.5T for the La0.6Ba0.4MnO3 composition. The relative cooling power (RCP) is 79.31 J/ kg for the same applied magnetic field.

2005년 10월 17일 중국현대문학 최후의 거장 바진이 사망하였다. 중국의 대중매체들은 그의 죽음을 두 고 “중국의 한 시대 문학의 역사가 진정으로 마쳤음을 상징한다”라고 보도하였다. 하지만 ≪수상록≫과 바진의 사망에 따라 촉발된 바진에 대한 연구 열풍은 곧 식어갔고, 중국현대문학 최후의 거장 바진에 대 한 기억들도 세인들의 뇌리에서 서서히 잊혀져갔다. 세인들의 바진에 대한 기억은 언론매체들의 상투적 평가, 예컨대 ‘기치’, ‘한 시대의 모범’, ‘하나의 금자탑’ 등으로 고착화되어 버렸다. 그런데 문제는 바진 에 대한 찬양 일변도의 행태가 과연 그에 대한 올바른 평가를 내리는 데 도움이 되냐는 것이다. 어떠한 이의도 제기하지 않고 일관되게 칭송만 하는 것은 바진을 오히려 박제화시키는 결과를 낳고 있다. 즉, 바진은 하나의 단순한 문화 기호로 소비되고 있는 것이다. 그런 의미에서 바진 사후 10여년이 흐른 지금 바진에 대한 진중한 고찰과 비판적 성찰이 필요할 것으로 보인다.

산소 분리를 위한 세라믹 중공사막을 상전이 방적기술을 통해 제조하였다. 초기 BSCF 선구물질은 고상반응법을 이용하여 합성한 상용 분말이며, 고분자 용액에 분산시킨 후 이중관형 노즐을 통해 사출하였다. 사출된 분리막은 상전이 과정을 거친 후 건조시켰으며 중공사막의 한쪽 끝을 밀봉하였다. 한쪽 끝이 막힌 중공사막의 표면에 dip coating 방법으로 LSCF를 코팅하였으며 1100 ℃에서 소결하여 치밀성을 갖는 한쪽 끝이 막힌 LSCF coated BSCF 중공사막을 제조하였다. 분리막의 공급측은 대기 중 공기를 사용하였으며 투과측은 진공상태를 유지하였다. 투과된 기체의 유량 및 산소의 농도를 측정하였으며 장기투과 실험과 EDS 분석을 통해 분리막의 안정성 평가를 진행하였다.