도로 포장 기술이 발달함에 따라 내구성 확보 등의 구조성능 중심에서 이용자의 승차감 및 소음 저감 등의 기능성 중심으로 변화하 고 있다. 최근 도로 소음에 대한 민원이 증가하고 있고 도로 소음으로 인한 피해를 보상하라는 판결 사례도 증가하고 있다. 이러한 문 제를 해결하기 위해 차량 소음 저감 효과가 우수한 저소음 포장을 적용하고 있다. 본 연구에서는 저소음 배수성 포장과 저소음 비배 수성 포장의 내구성 및 공용성을 평가하였으며, 기대수명 예측을 위해 국내에 있는 배수성 8종, 비배수성 3종의 제품을 이용하여 실내 성능 평가를 수행하였다. 국토교통부의 "아스팔트 콘크리트 포장 시공 지침(2021)"의 배수성 포장 품질기준 및 비배수성 혼합물에 대 한 품질기준에 따라 시험을 진행하였다. 아스팔트 혼합물의 생산, 저장, 운반 및 포설 시 아스팔트의 흘러내리는 양이 적합한지를 평 가하기 위해 드레인다운 시험을 진행하였고, 배수성 혼합물의 골재 비산 저항성을 평가하기 위해 칸타브로 손실률 시험을 진행하였다. 또한 포장의 수분 저항성을 평가하기 위해 인장강도비(TSR) 시험과 소성변형 저항성을 평가하기 위해 동적안정도 시험을 진행하였다. 이후, 배수성 포장의 투수 성능을 평가하기 위한 실내투수계수 시험을 진행하였고, 저소음 포장의 소음 저감 성능을 평가하기 위해 임 피던스 관을 이용한 흡음률 시험을 진행하였다. 시험 결과 모든 종류의 혼합물이 품질기준을 통과하여 충분한 기초 성능을 가지고 있 는 것으로 나타났고, 흡음률 시험의 경우 배수성 혼합물이 평균 0.779, 비배수성 혼합물이 평균 0.638의 흡음계수를 나타내었다. 배수 성 혼합물과 비배수성 혼합물의 평균 공극률은 각각 19.3%, 3.2%로 배수성 혼합물이 비배수성 혼합물에 비해 많은 공극률을 가지고 있어 소음 저감 성능이 비배수성에 비해 우수한 것으로 판단하였다.
This study is about the design of an elastic support system to isolate the structural noise of the low accumulator of the naval artillery among the equipment mounted on a warship. As the structural noise measurement value of the low accumulator transmitted to the ship exceeded the standard value, a method of applying an elastic mount between the equipment and the ship was devised to isolate the structural noise. By calculating the target vibration isolation efficiency, the vibration isolating system was designed in consideration of design factors such as the system's natural frequency and static displacement. Finally, the performance of the structural noise reduction of the designed vibration isolating system was verified by evaluating the structural noise transmitted to the foundation plate of the equipment from the low accumulator to which designed elastic support system was applied.
PURPOSES : The purpose of this study is to estimate the reduction in traffic noise in a double-layered specific porous pavement at roadsides based on variations in traffic volume and driving speed.
METHODS : A statistical pass-by (SPB) method was employed in this study to measure noise. Variations in the following parameters were measured: running speed, heavy traffic percentage, and traffic volume.
RESULTS : Quantitative analysis revealed that the double-layered porous pavement reduced noise levels by 9.16 dB(A) at a 95% confidence level at the sides of roads.
CONCLUSIONS : As a countermeasure of traffic noise, porous pavement has been recommended. This research quantitatively proved that double-layered porous pavement can reduce traffic noise by more than 9.0 dB(A) at roadsides
PURPOSES : The purpose of this study is to estimate the reduction of traffic noise in a double-layered specific porous pavement based on the traffic speed variation.
METHODS : The close-proximity method was used in noise measurement, and the running speed was measured at 10 km/h and from 50 to 80 km/h.
RESULTS : From the quantitative analysis, it was found that the double-layered porous pavement reduced by 9.4 dB (A) on the average and 9.16 dB (A) at a 95% confidence level.
CONCLUSIONS : The use of porous pavements have been recommended to minimize traffic noise. In this study, it is quantitatively demonstrated that the double-layered porous pavement can reduce the traffic noise by more than 9.0 dB(A).
PURPOSES : In many European countries, the fine-size exposed aggregate concrete pavement (EACP) technique has been adopted for a quiet pavement. However, different noise reduction levels were reported based on the mixture design and texture conditions. This study aims to suggest a quality control condition for achieving low-noise texture and a mixture design procedure for exposed aggregate concrete overlay (EACO), which will provide the optimum mixture of the surface texture that can reduce the tire-pavement noise.
METHODS : The tire-pavement noise is highly influenced by the pavement surface texture. The surface texture of the EACP can be quantified by the mean texture depth (MTD) and the exposed aggregate number (EAN). The optimum condition for the low-noise texture of the EACP was investigated herein based on the analysis of the review of the texture conditions and noise measurement in many EACP sites.
RESULTS : The MTD and EAN criteria can be derived according to the investigated relationship between noise and texture condition. The optimum mixture design to satisfy these criteria can be achieved by controlling the maximum size of the coarse aggregate and the S/a.
CONCLUSIONS: This study aimed to suggest a quality control condition for achieving low-noise texture and an optimum mixture design for EACO. As a result, we found that the early traffic opening of EACO can be achieved by using high early-strength cement.
In advanced countries, various policies are being enforced to reduce equipment noise level at it’s source. This paper analyses the problems of domestic noise policies related to noisy equipment, and presents a plan for improving the implementation of expansion policy of low noise equipment based on this analysis. This paper proposes that the equipment satisfying the compulsory rule be able to use the environmental certification mark, the standards of which are defined in recommended rules, to improve the linkage between the two policy measures. This paper also suggests expanding the range of equipment to be supervised and using new noise label that has grades and shows detailed noise level of the equipment to improve environmental certification system. In addition, supplementing the construction permission system and supporting international certification system are offered to expand the use of low noise equipment.
PURPOSES : The purpose of this study is to compare noise reduction quantities between before/after two-layer low noise pavement implementation using equivalent noise level analysis and to analyze the noise reduction effects of the two layer low noise pavement with a statistical method such as the Anderson-Darling Test.METHODS: In order to compare and to analyze noise reduction effects between before/after two-layer low noise pavement implementation, data acquisition as noise levels on a roadside and an apartment rooftop was conducted in the study area. The equivalent noise level was estimated in order to compare noise reduction quantities and the Anderson-Darling Test was carried out for estimating noise reduction effects of the two-layer low noise pavement.RESULTS: The equivalent noise levels of before/after two-layer low noise pavement implementation for the roadside during the daytime are 65.355 dB and 63.520 dB and during the nighttime are 62.463 dB and 59.088 dB. The equivalent noise levels for the apartment rooftop during daytime are 57.301 dB and 59.088 dB and during the nighttime are 54.616 dB and 52.464 dB. Also two-layer low noise pavement decreased the noise reduction effects estimated with the statistical method as the Anderson-Darling test for the roadside during the daytime by around 66.68% and decreased noise reduction effects on the roadside during the nighttime by 0.70%. Moreover it reduced noise reduction effects in the apartment rooftop during the daytime and nighttime by 0% and 96.32%, respectively.CONCLUSIONS : Based on the result of this study, two-layer low noise pavement can positively affect noise reduction during both the daytime and nighttime according to the results of estimating the equivalent noise levels and the Anderson-Darling test.
With increasing number construction of high-rise building which has about 40 to 60 floors there have been many kinds of problem which related with usage from vibration. To predict response acceleration, it is important to assess correct natural frequency. However, due to the noise of MEMS sensor, it is difficult to measure dynamic characteristic such as natural frequency when measuring ambient vibration using MEMS sensor within cell phone. Therefore, a comparative analysis on vibration measuring applications was performed after measuring ambient vibration of 2 skyscrappers which have height between 133.5~244.3m that are located in Seoul and Observation tower using I-jishin APP with noise reduction function of MEMS sensor in order to verify the effectiveness of low noise type vibration measurement APP.
OBJECTIVES : The objective of this research is to determine the moisture resistance of the freeze-thaw process occurring in low-noise porous pavement using either hydrated-lime or anti-freezing agent. Various additives were applied to low-noise porous asphalt, which is actively paved in South Korea, to overcome its disadvantages. Moreover, the optimum contents of hydrated-lime and anti-freezing agent and behavior properties of low-noise porous asphalt layer are determined using dynamic moduli via the freeze-thaw test. METHODS: The low-noise porous asphalt mixtures were made using gyratory compacters to investigate its properties with either hydratedlime or anti-freezing agent. To determine the dynamic moduli of each mixture, impact resonance test was conducted. The applied standard for the freeze-thaw test of asphalt mixture is ASTM D 6857. The freeze-thaw and impact resonance tests were performed twice at each stage. The behavior properties were defined using finite element method, which was performed using the dynamic modulus data obtained from the freezethaw test and resonance frequencies obtained from non-destructive impact test. RESULTS: The results show that the coherence and strength of the low-noise porous asphalt mixture decreased continuously with the increase in the temperature of the mixture. The dynamic modulus of the normal low-noise porous asphalt mixture dramatically decreased after one cycle of freezing and thawing stages, which is more than that of other mixtures containing additives. The damage rate was higher when the freeze-thaw test was repeated. CONCLUSIONS : From the root mean squared error (RMSE) and mean percentage error (MPE) analyses, the addition rates of 1.5% hydrated-lime and 0.5% anti-freezing agent resulted in the strongest mixture having the highest moisture resistance compared to other specimens with each additive in 1 cycle freeze-thaw test. Moreover, the freeze-thaw resistance significantly improved when a hydrated-lime content of 0.5% was applied for the two cycles of the freeze-thaw test. Hence, the optimum contents of both hydrated-lime and anti-freezing agent are 0.5%.
The noise from the exhaust system to the engine is important in terms of the problem of noise pollution, as well as improved marketability, there are many studies being made. Normally, the exhaust noise change is the exhaust manifold of the muffler or four days depending on the structure of the portion of the shape and the Lancer, called look a big difference, and the perforated pipe resonance, expression that contains a study of the structure of the muffler is a general precedent. This muffler is based on four wheel to differentiate between the borrower and the borrower can be broken down into a motorcycle. The details of the stock muffler, the muffler is tuned racing use. Therefore, this study is the last motorcycle noise and exhaust emission for environmental tests have not been established yet 125cc motor cycle noise is used as a reference for the criteria for information about the experiment. There are few types of motorcycle muffler, such as stock muffler, slip on muffler and full system muffler used racing. On this study through to the measurement motorcycle exhaust noise and analysis 1/3 octave band get a target frequency. For the design resonance muffler used Helemholtz’s resonance formular. Also when design the muffler consider mount of frame. This studied expect reduction noise without sound absorption.
저주파소음(low frequency noise; LFN)은 인체의 다양한 기관과 정신적 상태에 영향을 미치며, 진동음향질환(vibroacoustic disease; VAD)같은 질병들을 야기 시킨다 이전의 연구에서는 인간 또는 설치류에서 VAD는 우울증 또는 불안장애와 같은 만성적인 정신 건강에 위험을 미친다고 보고되고 있다. 본 연구에서는 LFN이 스트레스의 신경생리적 반응에 미치는 영향을 규명하고자 하였다. 이를 위하여, LFN에 노출된 흰쥐에서 스트레스 반응에 중요한 역할을 하는 paraventricular nucleus of the hypothalamus(PVN)에서 초기발현유전자인 c-fos 양성세포 발현, locus coeruleus(LC)에서 NE 생성 효소인 tyrosine hydroxylase(TH) 양성세포 발현과 스트레스 호르몬의 농도를 측정하였다. LFN 집단은 각각 32.5Hz 와 125Hz를 하루에 4시간씩 이틀 동안 소음에 노출 하였으며, 정상집단은 소음에 노출되지 않도록 하였다. 저주파소음에 노출 후 집단 간 혈액내 코르티코스테론 분석과, 면역 조직염색법을 이용하여 스트레스에 반응하는 PVN에서 c-fos발현과, LC에서 TH를 분석한 결과, PVN에서는 c-fos 의 발현과 LC에서 TH의 발현이 증가됨을 관찰할 수 있었으며, 그리고 혈중 코르티코스테론의 농도 또한 LFN 집단에서 높게 발현됨을 확인 하였다. 그리고 32.5Hz보다 125Hz의 소음에서 면역염색반응과 코르티코스테론의 결과가 다소 높게 나타남을 알 수 있었다. 이러한 결과는 저주파소음에 의해 스트레스와 연관된 뇌의 부위에서 c-Fos와 TH의 발현이 증가됨을 증명하고 있다. 따라서 저주파소음은 일반적인 스트레스에 의한 반응과 비슷한 신경적 특징들을 보여주고 있다. 그리고 저주파소음에 의한 중추, 말초신경계의 활성화는 아마도 진동음향질환과 같은 행동장애 질병과 관련이 있을 것임을 시사한다.
A 230 GHz SIS tunnel junction receiver has been being developed for radio astronomy in Nagoya University. In this heterodyne receiver, we use a $\~$ 수식 이미지1/3 reduced hight rectangular waveguide SIS mixer with two tuning elements as front end. The mixer block with SIS junction was cooled to 4K with a closed cycle He-gas refrigerator. So far, a double sideband receiver noise temperature lower than l00K in 222-237 GHz is obtained. The receiver exhibits a best DSB noise temperature of 69K at 236 GHz as well as 228 GHz.
두부 CT에서 피폭선량을 줄이기 위해서 저관전압 사용이 요구된다. 그러나 노이즈가 증가하는 현상이 발생해서 2차 데이터 가공 시 오류를 초래할 수 있다. 본 연구에서는 저관전압을 사용하고 노이즈를 줄일 수 있는 방법을 제시하였다. 실험 결과 100kVp 에서 노이즈 값이 높게 나타났고, 140kVp에서 가장 낮게 나타났다. 100kVp에서 선량이 낮게 나타났고, 140kVp에서 선량이 높게 기록되었다. 역치값에 따른 웨이블릿의 적용 결과 웨이블릿 Th30에서 노이즈값은 4.51로 감소하였다.(50% 감소) 100kVp, 회전시간 0.5 sec (선량: 40.64 mGy)파라미터 조건과 웨이블릿 Th 30을 사용하면 65.3%의 피폭선량 감소가 가능하였다. 연구에서 제시한 방법을 두부CT영상에 적용한다면 환자의 안전과 정확한 정보를 해석하는데 도움을 줄 것이라고 판단한다.
본 연구에서는 지진계 센서의 동적범위를 향상시키는 새로운 방법을 제안하였다. 먼저, 센서에 포함된 저주파수 대역 잡음을 ARMA(Auto Regresive Moving Average) 모델로 모델링하고 시스템 식별 방법으로 그 모델을 식별한다. 다음으로, 모델링된 잡음과 지진파 입력을 칼만필터 식에 포함하여 칼만필터에 의한 지진파입력을 추정한다. 제안한 방법을 새로이 개발된 MEMS 기반 3축 가속도 형태의 지진계에 적용하여 성능을 검증하였다. 시험 결과는 제안한 방법이 단순한 LPF(Low Pass Filter)를 사용한 경우에 비해 동적범위를 개선시킴을 보여준다.
Performance tests of low noise expansion joint for durability were carried out. As a result of tests, low noise expansion joint had the fatigue durability and the resistant performance for transverse direction displacement