대부분의 국가들은 온실가스 배출량을 줄이고 기후변화에 적응하기 위한 행동계획인 NDC (National Determined Contribution)를 법률화 했다. NDC 목표 달성을 위해 다양한 기술이 개발되고 있으며, 특히 가스상의 온실가스나 에너지원의 정화를 위해 분리막 수요가 증가하고 있다. 따라서, 본 논문은 다양한 재료 중 실현 가능한 제조 공정과 쉬운 스케일업의 장 점을 가지고 있는 고분자 막의 기술 동향을 제공할 것이다.

The electrification of transportation is expected to greatly contribute to achieving the global climate change target. This study analyzed technological competitiveness in the fuel cell electric vehicle (FCEV) field based on patent family and citation index. Technology analysis was conducted by dividing FECV into six sub-technology areas based on IPC with fuel cell system, fuel cell technology, vehicle system, hydrogen storage and fueling, catalyst technology and etc. The largest number of patents are being filed in the fuel cell system technology field, and the fields with high growth rates over the past 10 years (2012-2022) were vehicle systems (12.4%) and hydrogen storage fuel field(11.5%). As of 2021, among global automakers, Toyota ranks the first in patent applications for FECV followed by Hyundai Motors in Korea, followed by Honda and Audi, with an average annual growth rate of 19.8%, the highest among competitors.

The presence of technological voids in deep geological repositories for high-level radioactive nuclear waste can have negative effects on the hydro-mechanical properties of the engineered barrier system when groundwater infiltrates from the surrounding rock. This study conducted hydration tests along with image acquisition and X-ray CT analysis on compacted Korean bentonite samples, which simulated technological voids filling to investigate the behavior of fracturing (piping erosion) and cracking deterioration. We utilized a dual syringe pump to inject water into a cell consisting of a bentonite block and technological voids at a consistent flow rate. The results showed that water inflow to fill technological voids led to partial hydration and self-sealing, followed by the formation of an erosional piping channel along the wetting front. After the piping channel generated, the cyclic filling-piping stage is characterized by the repetitive accumulation and drop of water pressure, accompanied by the opening and closing of piping channels. The stoppage of water inflow leads to the formation of macro- and micro cracks in bentonite due to moisture migration caused by high suction pressure. These cracks create preferential flow paths that promote longterm groundwater infiltration. The experimental test and analysis are currently ongoing. Further experiments will be conducted to investigate the effects of different dry density in bentonite, flow rate, and chemical composition of injected water.

근래들어 미중 간의 기술패권 경쟁이 심화됨에 따라 미국은 중국의 첨 단반도체 기술의 발전을 저지하기 위한 다양한 경제적, 기술적 제재를 부과하고 있다. 최근에는 반도체산업의 글로벌 밸류체인(GVC, 가치사슬) 의 변동성 증대와 더불어, 미국 주도로 주요 반도체 생산국가들인 한국, 대만, 일본을 포함한 칩포(Chip-4) 동맹을 결성하기 위한 논의를 하고 있다. 물론 이러한 미중 간의 첨단기술 경쟁은 우리나라의 산업전반 특 히, 중국에 생산기지를 가지고 중국의 수요에 많이 의존하고 있는 우리 나라 반도체 산업에도 큰 영향을 미치지 않을 수 없다. 따라서 미중 간 반도체산업 분야의 기술경쟁 실태를 면밀하게 분석하고, 이를 토대로 우 리의 국익을 극대화할 수 있는 방안을 모색하는 것이 절실하다. 이러한 배경 하에서, 본 논문은 반도체산업을 중심으로, 현재 미중 간에 벌어지 고 있는 기술패권 경쟁에서 미국과 중국은 각기 어떠한 위치를 점하고 어떠한 전략을 구사하고 있는지를 분석하고, 이를 토대로 이러한 미중 간 기술경쟁이 우리나라 반도체산업에 미칠 영향을 점검하고 적절한 대 응방안을 모색하고자 하는 것이다.

본 논문은 Schumpeter의 기술변화 3단계 개념에 기초해서 기술진보가 실질 경제성장에 기여하는 정도를 측정하는 새로운 방법을 제시한다. 통계청 광업제조업조사 마이크로데이터를 이용해서 2003-2018년 기간 동안 기술진보의 실질 성장기여 정도를 총요소 생산성 성장률(성장회계방법), R&D투자 기여율, 슘페테리안 혁신성장률로 각각 측정하고 비교한 결과는 다음과 같다. 첫째, 성장회계의 총요소생산성 성장률과 슘페테리안 혁신 성장률에 의한 기술진보의 실질 성장기여에 대한 측정에서 상반된 결과를 나타낸다. 둘째, 생산성장률이 감소추세에 있으면 증가추세에 있을 때와 비교해서 생산성장률과 총요소생산 성성장률 차이가 커지고, 반대로 증가추세에 있으면 감소추세에 있을 때와 비교에서 생산성 장률과 총요소생산성성장률의 차이가 작아진다. 셋째, 혁신성장률에 영향을 미치는 기술기회, 즉, 어느 한 분야의 연구개발과 그 인접분야까지의 연구개발 유인이 혁신성장에 미치는 기여도는 3.3%에 불과하다. 이 결과가 기존의 기술진보의 성장기여에 대한 인식과 다른 이유는 기술 진보라는 동일한 용어를 측정하면서 서로 다른 실체를 측정하고 있는 것에 기인한다. 따라서 총요소생산성 성장률은 거시적 경제효율성, R&D투자는 신기술공급의 효과성, 슘페테리안 혁신성장률은 기술진보의 경제적 영향을 측정하는 데 사용해야 한다. 본 논문 연구 결과의 정책적 함의는 다음과 같다: ① 기술공급일변도의 정책에서 기술공급과 신기술수요지원의 융합정책으로 전환, ② 임무지향형 R&D 정책과 국가 R&D와 민간 R&D가 연계되는 R&D 정책, ③ 신지식체화 정도를 반영한 자본재의 재분류.

As the advent of the Fourth Industrial Revolution and Information Age, companies are in the state of infinite competition due to the rapidly changing technological environment and fierce competition. In this situation companies are making efforts to gain the competitive advantage by introducing information systems. Supply Chain Management (SCM) is considered a method to gain a competitive edge in rapid change. In fact, companies that already have introduced the SCM system are achieving company renovation with positive effects such as increase of sales stock reduction on-time delivery cost reduction and improved efficiency. This study was started to investigate the resistance that occurs in introducing the SCM system for small and medium-sized manufacturing industries that have not yet introduced the SCM system despite the importance of the SCM system, and to check the effect on the intention of the introduction. As the result of this study, the first is that the company has the higher technological innovation, the more positive the effect on Relative advantage Compatibility Perceived risk, Complexity. Second, The compatibility of the SCM system was rejected in innovation resistance, but it is adopted with the highest impact in the introduction intention. In addition, the mediating effect of innovation resistance was also rejected, confirming that if the SCM system is compatible for the company, it doesn’t affect the resistance and is the biggest factor to consider in the introduction of the SCM system. Third, the perceived risk of the SCM system doesn’t directly affect the intention to introduce, but has an indirect effect when mediation innovation resistance.

In SMEs, technological innovation is recognized as an important tool in terms of sustainable growth. This study analyzed the determinants of technological innovation by using the information of the corporate panel DB composed of local SMEs. The internal factors were added with technological innovation capacity and production capacity and the industrial cluster environment was first applied to external factors. Also, whether the industrial cluster environment influences technological innovation through R&D capabilities, the mediating effect was tested with the Sobel Test. Among the internal and external factors, the most important determinant was marketing ability, and a policy was proposed to develop measures to increase R&D capability with mediating effect. Among the technological innovation variables, which are dependent variables, the most determinant factor was the proportion of new product sales. For this, it is considered that additional research such as longitudinal research with the concept of repetition and parallax using the corporate panel DB is necessary.

The change of fishing power index was analyzed to identify the development of the vessel and gear technology that may improve the fishing efficiency of the offshore conger eel pot fishery from 1980s to 2015. Gross tonnage per fishing vessel was rapidly increased annually. The standard of pot was maintained, but the number of pot used rapidly increased by using conger eel pot hauling devices, carrying and loading devices, main line hauler, casting devices and slide type pot. Fish finder system to identify fishing ground information and the conger eel pot hauling devices were modernized, and supply rate was also increased. Therefore, the relative fishing power index in the offshore conger eel pot fishery increased from 1.0 in 1980 to 1.3 in 1990, to 1.8 in 2000 and to 2.0 in 2015. The results are expected to contribute to reasonable fisheries stock management of the offshore conger eel pot fishery.

Thousands of pelagic and demersal fishes inhabit the waters around Korea and many of them are overexploited. One of the reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the otter trawl fishery from 1960s to 2010s. Gross tonnage was decreased stably, but horse power was increased annually. The perimeter of net mouth was somewhat longer, but little changed. Color fish finder was utilized from the mid-1960s. Hydraulic net drum were introduced in the early 1990s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting research. Therefore, the relative fishing power index in the trawl fishery increased about two to three times in the 2010s compared to the 1980s. The results are expected to contribute to reasonable fisheries stock management.

The technology competitions of automobile manufacturers are getting hot. The characteristics of the environment friendly automobile are not only lowering the emission of harmful exhaust gas through the change of the power source, but also paying great attention to improvement of the power efficiency. As the market for pure electric vehicles continues to grow, we have analyzed the global technology competitiveness by DCT (Dual Clutch Transmission) patents. Clustering can be classified into five types ; 1) a cluster associated with a dual clutch transmission system, 2) a cluster of a torque transmission device and a reverse speed ratio, 3) a cluster of co-planar sets and dual clutch assemblies related to transmitting devices, 4) Device clusters, and 5) a cluster of synchronizers and clusters to prevent simultaneous operation of dual clutch transmissions. In recent years, demand for pure electric vehicles has been rapidly increasing, and patent applications related to DCT have been steadily increasing for energy efficiency of motor power sources.

Thousands of demersal fishes inhabit in the waters around Korea and most of them are overexploited. One of reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the Danish seine fishery from 1960s to 2010s. Gross tonnage was decreased stably, but the horse power was increased annually. The length of ground rope, warp and hand rope was somewhat longer, but changed a little. Color fish finder was utilized from the mid-1960s and positioning system was used five years later. A hydraulic line hauler were introduced in the mid-1980s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting researchers. Therefore, the relative fishing power index in the Danish seine fishery increased stably from 1.0 in 1970 to 1.0 in 1980, to 1.2 in 1990, to 1.3 in 2000 and to 1.3 in 2010. The results are expected to contribute to reasonable fisheries stock management.

본 연구에서는 반도체 산업에서 기초과학 연구를 통한 흡수역량 개선 및 혁신 기회 포착 향상으로 응용과학 연구가 기술혁신 성과창출에 매개효과를 갖는지 실증 분석하고 자 하였다. 103개 반도체 기업들을 대상으로 분석한 결과 첫째, 응용과학 연구는 기초과학 보다 기술혁신 성과에 더 큰 영향을 미쳤다. 둘째, 응용과학 연구는 기초과학 연구와 기술혁신 성과 간에 완전매개효과를 갖는 것으로 나타났다. 셋째, 고성과 기업은 기술한계 극복을 위해 기초과학 연구에 적극적으로 나타났다. 본 연구는 기술혁신 창출을 위해 응용과학 연구뿐만 아니라 기초과학 연구가 필요하며, 기업보다 기초과학 연구에 적합한 환경을 갖는 대학 연구 소와의 전략적인 협력관계 구축 및 장기적 관점의 공동 연구의 활성화가 필요함을 제언한다.

Using the data of patents granted by USPTO during 2013~2017 from WIPO IP Statistic Data Center, this paper examines the general trend and the main technical fields of international patents granted to Korea, China and Japan. The Patent Activity Index(PAI) was used to analyze the dynamic changes of international patents in the top 5 technical fields. The results show as follows. First, the number of international patent applications and registration by China has been increasing rapidly in recent years. Second, the technical fields of international patents granted by China and South Korea are mainly concentrated in several fields, such as computer technology, semiconductors, digital communication, audio-visual technology and electrical machinery, apparatus, energy. Third, through the PAI index analysis, the technology innovation and concentration of South Korea and China surpassed Japan in telecommunications technology field, and China’s development in the semiconductor field is the strongest. The technological innovation performance of Japan was analyzed as to be relatively higher than that of China and South Korea in the field of electrical machinery, apparatus, energy.

이 연구는 국가경쟁력을 향상시키는 조건으로서 기술창업의 역할에 대해 분석 한다. 기업가의 지식확산이론(Knowledge Spillover Theory of Entrepreneurship)을 기반으로, 국가 내 기술기반 창업의 비중이 국가경쟁력을 높이는 데 어떠한 영향을 주는지 분석한다. 또한 국가경제개발 단계 측면에서 혁신주도형경제(Innovation-driven economy)에 해당 되는 경우 국가경쟁력에 미치는 기술창업의 영향력이 어떻게 조절되는지 살펴본다. 2011년 부터 2014년까지 83개 국가의 기술창업, 국가경쟁력지수, 경제개발단계 등의 데이터를 기반으로 분석한 결과, 국가 내 기술창업비율은 국가경쟁력과 U자형 관계를 가진다는 점을 확인 했다. 또한 국가 발전단계 상혁신주도형경제에 해당되는 국가의 경우 이 관계는 강화되는 방향으로 조절되는 점을 확인했다. 이 연구는 기술 기반의 창업 비율이 증가할수록 국가경쟁력에 무조건 긍정적 영향을 미치지 않으며 상황과 조건이 잘 맞아야 함을 강조한다.

The small yellow croaker (Larimichthys polyactis) is one of the representative high-class fish species in Korea. The catch of small yellow croaker in adjacent water fisheries has been continuously decreasing from 59,226 tons in 2011 to 19,271 tons in 2016. The small yellow croaker is caught by gillnet, stow net and bottom trawl, among which about 55~65% is caught by gillnet. For the sustainable use of small yellow croaker, the fishing power of small yellow croaker drift gillnet is very important. Therefore, the change of fishing power index were analyzed to identify the development of the vessel and gear technology that may have improved the fishing efficiency of the small yellow croaker drift gillnet fishery from 1960s to 2010s. Gross tonnage and horse power per fishing vessel was increased annually. The mesh size was 75.0 mm in the 1960s, but reduced to 60.6 mm in the 1980s and to 51.0 mm in the 2000s. In the 1960s, it was hauled out by manpower. However, the net hauler were modernized and supply rate was also increased since 1970. Due to the mechanization of the net hauler, the number (length) of used net gradually increased from 1.5 km in the 1960s to 7.5 km in the mid-1980s and to 15 km in 2010. Colour fish finders and positioning system were introduced and utilized from the mid-1980s. Surveys on the supply and upgrading of fishing equipment utilized visiting research. Therefore, the relative fishing power index in the small yellow croaker drift gillnet fishery increased from 1.0 in 1980 to 0.8 in 1970, to 1.1 in 1990, to 1.6 in 2000 and to 1.9 in 2010. The results are expected to contribute to reasonable fisheries stock management of the small yellow croaker drift gillnet fishery.

본 연구는 지역 클러스터 내에 존재하는 기술지식 교류 네트워크의 전반적인 구조적 특징을 파악하기 위해 사회네트워크 분석에 토대한 구조적 등위성 분석을 실증적으로 수행한다. 지금까지 기존 연구들은 구조적으로 등위적인 집단들 간에 성과차이가 존재하는 것으로 개념적으로 주장하였다. 그러나, 이에 대한 실증연구가 거의 없어 본 연구가 이를 보완하기 위해 수행되었다. 분석을 위해 구미국가산업단지 내에서 53개의 기술지식 교류 관련 협회 등을 조사하여 2550개 기업의 2-mode 네트워크 데이터를 활용하였다. 분석결과, 구조적 등위 집단들이 규정되고 중요한 기업들의 속성에 기초하여 네트워크 기존기업(established firms), 중개 기업(broker firms), 신생기업(emerging firms), 고립 기업(isolationist firms)으로 4개의 역할이 결정될 수 있었다. 또한, 블록 1에서 불록 4로 구분된 각각의 구조적 등위 집단들 즉, 역할들 간의 성과(매출액), 급진적 혁신성향, 기술혁신역량 차이에 대한 검증에서는 역할마다 검증결과가 차별적일 수 있음이 본 연구를 통해 제시되었다. 마지막으로 본 연구는 구조적으로 등위적인 집단들 간의 성과차이에 대한 연구를 발전시킬 필요성을 제안한다.

The private sector is currently reviewing the feasibility of the project or deciding economic policies by analyzing the economic ripple effects. However, the arms acquisition project focuses on the need for the national defense weapons system by analyzing the costs and the effectiveness of the analysis and reviewing the necessity and feasibility of the project. In order to analyze the economic ripple effects, KB (the Bank of Korea) prepares and publishes an analysis table of industrial associations in a given unit. IAAR (the industrial association analysis report) is difficult to apply directly to the defense weapons system. Therefore, research on the economic ripple effects applicable to the defense arms procurement project was needed. In this study, we propose the generic methodology for estimating economical and technical ripple effects resulted in acquiring new weapon systems. Based on the analysis of inter-industrial relations, economical ripple effects are estimated with production inducing effects, value-induced effects, employment-induced effects and export-induced effects. Also, the technological ripple effects are estimated with technological intensity represented by investment cost in research and development. To show the validity of proposed methodology, a case study of acquiring new weapon systems such as GR (guided rocket), destroyer, and helicopter is accomplished. From the case study, it is concluded that these economical & technological ripple effects can be used as a reference to decision making in the course of acquiring major future defense weapons systems.