San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

Upo Wetland is the largest riverine wetland in Korea which has been inscribed on the Ramsar List of Wetlands of International Importance in 1998. In this study, sedimentological study was carried out in order to understand the environmental changes in Upo Wetland during the Holocene. The drilling work for recovering the Quaternary sediments was conducted on the inner part (UPW17-01, UPW17-02, and UPW17-03) and the outer part (UPL17-01, UPL17-02) of the Upo Wetland. The recovered sediments are commonly characterized by gravel-dominated deposits in the lower part and silty clay-dominated deposits in the middle to upper parts respectively, which are seemed to be changed from fluvial to palustrine/lacustrine environments around 4,000 cal yr BP. In order to establish the Holocene diatoms distribution from Upo Wetland, we identified 63 diatom taxa. Of these, 14 species were new records for Korea: Gomphonema consector, Gomphonema jadwigiae, Hantzschia abundans, Luticola pseudomurrayi, Luticola spauldingiae, Neidium suboblongum, Ninastrelnikovia gibbosa, Oricymba rhynchocephala, Pinnularia borealis var. lanceolata, Pinnularia latarea, Pinnularia paliobducta, Pinnularia saprophila, Sellaphora laevissima, Stauroneis pseudoschimanskii. All identified diatom species are illustrated by high-quality scanning electron microscopic and light microscopic microphotographs. The ecological habitat for all taxa are presented.

Changes in target strength (TS) values of sandfish when sandfish was alive and dead were investigated using ex-situ at120 kHz. TS values measured by tilt angles with ‑50∼+50 degrees showed ranges from ‑71.0 to ‑53.3 dB for live sandfish, ‑63.1~‑46.3 dB for thawed sandfish, and ‑70.0~‑50.4 dB after 24 hours from thawed, respectively. It was shown that while TS values were similar between the case of live and the case of after 24 hours from thawed, mean TS values were higher by approximately 5 dB in the case of immediate thawed sandfish. It was also seen that TS values were similar between the case of thawed sandfish and the case of after 21 hours from live. The results showed that TS values of live sandfish were different from those of frozen sandfish. It implies that when estimating TS of frozen fish, the influx of bubbles and changes of body should be considered.

The objective of this study was to evaluate the characteristics of Korean Native Cattle sperm frozen-thawed with L-cysteine and/or catalase. The semen from bulls was collected by the artificial vagina method, and Triladyl containing 20% egg-yolk and/or L-cysteine (L), catalase (C) and L-cysteine + catalase was added to the diluted semen for cryopreservation. The results showed that sperm viability was significantly higher in the L-cysteine + catalase (69.49 ± 3.16%) group than in the control (60.5 ± 3.94%) group (p<0.05). Acrosome damage was significantly lower in the L-cysteine (17.12 ± 1.08%) group than in the control (21.46 ± 1.14%), catalase (20.54 ± 0.76%), and L-cysteine + catalase (19.29 ± 0.65%) groups (p<0.05). In addition, the level of intact mitochondria in the spermatozoa was significantly higher in the L-cysteine (58.65 ± 1.39%) group than in the control (50.63 ± 2.37%) group (p<0.05). The hydrogen peroxide level in the frozen-thawed sperm was significantly lower in the L-cysteine (3.74 ± 1.66%), catalase (4.65 ± 1.87%), and L-cysteine + catalase (8.11 ± 2.15%) groups than in the control (13.22 ± 1.6%) group (p<0.05). The glutathione level was significantly higher in the L-cysteine (1.33 ± 0.03%) group than in the control (1.08 ± 0.06 %), catalase (1.05 ± 0.02%) and L-cysteine + catalase (1.11 ± 0.03%) groups (p<0.05). In conclusion, L-cysteine and catalase could protect the membrane of Korean Native Cattle sperm from damage during sperm cryopreservation. Especially, L-cysteine was more effective for keeping acrosomes and mitochondria intactness during sperm cryopreservation.

목적: 고분자 안경 렌즈를 산성 용액에 침지시킨 후 용액의 pH에 따른 렌즈 및 코팅의 특성 변화에 대해 알아보고자 하였다. 방법: 폴리비닐에스터와 폴리우레탄 계열의 안경 렌즈를 인공 산성비 용액(pH 2.4~6.0)에 1~5주 동안 침지시킨 후 광학적, 물리적 특성 변화를 측정하였다. 결과: 고분자 안경 렌즈를 산성 용액에 침지시킨 시간이 증가됨에 따라 렌즈의 가시광선 투과율, 접촉각, 경도, 그리고 내마모성은 감소되었다. 특히 강산(pH 2.4)에 5주 동안 노출된 렌즈의 경도는 비닐 에스터 소재의 렌즈는 34.7%, 우레탄소재의 렌즈들은 각각 52.3%과 29%정도 감소되었다. 부착력은 5주차 이상 침지된 우레탄계열 렌즈는 모두 4B등급, 비닐 에스터 계열은 5B등급으로 나타났다. 전기장은 침지시킨 용액의 산성도 및 침지 시간에 관계없이 렌즈에 의해 모두 차단되었다. 결론: 본 연구 결과를 통하여 반복적인 산성비 노출은 안경렌즈 재질의 변화 및 이에 따른 렌즈 코팅 수명 단축으로 인한 여러 광학적, 물리적 특성이 저하됨을 확인하였다.

Yacon (Smallanthussonchifolius) is a root crop that contains high amounts of fructo-oligosaccharides (FOS). FOS has a sweet taste, is low in calories, and is known to promote intestinal tract health. In this study, various yacon concentrates were substituted for sugar in white pan bread to obtain healthy benefits from the use of FOS. The quality characteristic changes during storage of the white pan breadswith 0, 25, 50, 75 and 100% of added yacon concentrates instead of sugar were investigated. During storage, the water contents and water activities of the breads made with high amounts of yacon concentrates changed less than in those made with only sugar. The hardness and chewiness of the breads made with high amounts of yacon concentrates had lower values than those made with only sugar. Thus, bread made with yacon concentrates might exhibit increased moisture retention and decreased aging velocity. The substitution of yacon concentrates for sugar in pan bread improved the bread quality.

The purpose of this study is to investigate the characteristic changes of the Changma season in the 2000s. To accomplish this goal, we have used daily rainfall data collected over nearly 40 years (1971 to 2010). The average summer precipitation data including the Changma season were collected from 16 weather stations that are placed across the three major regions (i.e. central region, southern region, and Jeju region) as Korea Meteorological Administration divided. These precipitation data were analyzed to find out characteristic changes of the Changma season. Results of the precipitation data comparison among the major regions that, monthly average precipitation in the central region was the highest in July; its precipitation tended to increase from May to September. In the southern region, the precipitation amount was lowest in June and tended to increase in May, September, and August. In the Jeju region, the precipitation has been the highest in June and July for the past 30 years, whereas September has been highest month in the last 10 years. The precipitation amount in the Jeju region decreased both in June and July, whereas it tended to grow in May, August and September. A correlation coefficient formula by Karl Pearson has been used to find out correlations between the Changma season and the precipitation of the major regions in 2000s and normal years. It was found that the correlation coefficient has decreased from 0.723 to 0.524 in the 2000s (2001 to 2010) compared to normal years (1971 to 2000).

In order to investigate the microstructure and mechanical properties of WC-10 wt% Co insert tool alloy fabricated by PIM (Powder Injection Molding) process, the feedstock of WC-10 wt% and wax used as a kind of binder were mixed together by two blade mixer. After injection molding, the debinding process was carried out by two-steps. First, solvent extraction, in which the binder was eliminated by putting the specimen into normal hexane for 24 hrs at , and subsequently thermal debinding which was conducted at and for 6 hrs in the mixed gas of , respectively. Meantime, in order to compensate the decarburization due to hydrogen, 1.2~1.8% of carbon was added to ensure the integrity of the phase. Finally, the specimens were sintered in vacuum under different temperatures, and the relative density of 99.8% and hardness of 2100 Hv can be achieved when sintered at , even the TRS is lower than the conventional sintering process.

Electromagnetic wave energies are consumed in the form of thermal energy, which is mainly caused by magnetic loss, dielectric loss and conductive loss. In this study, CNT was added to the nanocrystalline soft magnetic materials inducing a high magnetic loss, in order to improve the dielectric loss of the EM wave absorption sheet. Generally, the aspect ratio and the dispersion state of CNT can be changed by the pre-ball milling process, which affects the absorbing properties. After the various ball-milling processes, 1wt% of CNTs were mixed with the nanocrystalline base powder, and then further processed to make EM absorption sheets. As a result, the addition of CNT to Fe-based nanocrystalline materials improved the absorption properties. However, the increase of ball-milling time for more than 1h was not desirable for the powder mixture, because the ballmilling caused the shortening of CNT length and the agglomeration of the CNT flakes.

The amorphous (at%) alloy strip was pulverized using a jet mill and an attrition mill to get flake-shaped powder. The flake powder was mixed with dielectric powder and its dispersant to increase the permittivity. The powders covered with dielectric powders and its dispersant were mixed with a binder and a solvent and then tape-cast to form sheets. The absorbing properties of the sheets were measured to investigate the roles of the dielectric powder and its dispersant. The results showed that the addition of powders and its dispersant improved the absorbing properties of the sheets noticeably. The powder sheet mixed with 5 wt% of powder and 1 wt% of dispersant showed the best electromagnetic wave absorption rate because of the increase of the permittivity and the electrical resistance

본 연구에서는 용사용WC-17%Co 복합분말을 분무건조법으로 제조하고 열처리 온도(850˚C, 1000˚C, 1150˚C, 1300˚C)에 따른 조립분말의 미세구조, 입도분포, 유동도, 및 결정상변화를 고찰하였다. 분무건조상태의 입형은 구형이었으며, 입도분포, 평균입자크기, 유동성은 각각 20.6-51.7μm, 27.2μm, 0.26 sec/g 이었다. 열처리에 의하여 조립분말은 치밀화되어 1300˚C 열처리 후에는 입도분포와 평균입자크기가 각 각 6.9-37.9μm과 17.8μm로 감소하였으며, 유동성은 0.12 sec/g로 향상되었다. 열처리중에 WC와 Co의 상화확산에 의하여 Co6W6C및 Co3W3C이 생성되었으며, 두 상이 나타나는 임계온도는 1150˚C이었다.

뇌록은 조선시대 건축물의 바탕칠(가칠)에 사용된 녹색 안료이며, 불국사 대웅전 등 주요 건축물의 단청에 사용되었다. 본 연구에서는 한국 전통 안료 원료인 뇌록을 이용하여 소성온도에 따른 광물학적 특성 변화를 살펴보았다. 포항 뇌성산 일대에 국부적으로 산출하고 있는 뇌록은 주구성 광물이 셀라도나이트(celadonite)이며, 주요 구성 원소는 Fe, Si, K, Mg 등으로 주로 Fe가 풍부한 운모류임을 알 수 있다. 105℃~1000℃까지 단계적 소성실험 결과, 색상이 녹색 → 담녹색 → 갈색 → 적색으로 변하였으며, 열분석에서는 616℃ 부근에서 결정수의 탈수작용에 의한 흡열반응이 확인되었다. 광물의 변화는 600℃ 이상에서 결정면[(11-1), (02-1)]이 붕괴되고, 1000℃ 이상에서 철산화물이 형성되었다. 따라서 뇌록의 정출 온도가 600℃ 이하인 것으로 추정되며, 셀라도나이트만이 확인되는 것으로보아 Stage I 단계만의 변질을 겪은 것으로 판단된다.

미숙과의 가공법 제안 및 기능성 규명을 위한 기초 연구 의 일환으로 반시 미숙과를 7 step으로 나누어 열처리 숙성 하면서 이화학적 특성 및 항산화 활성의 변화를 분석하였 다. 반시 미숙과는 숙성됨에 따라 수분함량과 pH는 점차 감소하고, 산도는 증가하는 경향이었다. 숙성이 진행됨에 따라 갈변이 유도되면서 step 3까지 적색도는 급격히 증가 하였으며, 황색도는 큰 폭으로 감소하였다. 반시의 탄력성, 씹힘성과 점착성의 경우에는 step 2~3에서 변화한 후에는 유의적인 차이를 보이지 않았다. 숙성 중 반시 미숙과의 fructose의 함량은 감소한데 반해 glucose 함량은 미량 증가 하였다. 페놀성 화합물은 gallic acid와 homogentisic acid, 2종이 검출되었는데 이들 화합물은 step 2까지는 검출되지 않았으나, step 3부터 숙성단계가 지남에 따라 함량이 증가 하였다. 이와 상반되게 탄닌 함량은 step 1에서 가장 높게 측정되었고 step 2에서 급감하였다. 숙성 단계별 반시 미숙 과 물 추출물의 DPPH와 ABTS 라디칼 소거능 및 FRAP법 에 따른 항산화 활성은 시료의 농도에 비례하여 유의적으로 증가하였으나, 숙성이 진행될수록 오히려 낮아졌다.

Natural frequency changes of an in-service concrete bridge have been monitored to analyze the dynamic characteristic according to temperature and embedded depth changes. 7 acceleration sensors are attached to the bridge, and 11 time impact experiments have been done using the impact hammer. The natural frequency has a trend to drop as the surface temperature of the body goes up. And it also has a trend to decrease as the embedded depth of the bridge foundation increases.

강우, 강설, 안개발생 등 기상상태의 변화는 운전자의 주행환경에 영향을 미치는 기상요인으로 기상악화시 차량의 차두간격과 속도에 영향을 미치게 되어 도로용량을 감소시키고, 교통사고 발생으로 인한 차로감소 등의 상황을 유발하여 맑은 날보다 더 큰 혼잡을 발생시키는 것으로 분석되었다. 운전자의 시정을 감소시키는 기상악화는 통행속도가 높은 고속도로가 일반도로 보다 기상상태에 따른 통행속도 변화 민감도와 교통사고 심각도가 높게 나타나는 특성이 있다고 분석됨에 따라 고속도로의 교통류 특성변화에는 시정거리가 중요하게 작용하는 것으로 판단되었다. 따라서 본 연구에서는 통행속도가 높은 고속도로 기본구간의 교통류 특성에 영향을 미치는 주요 요인으로 교통량과 속도를 선정하였으며, 일정수준 이상의 교통량 확보가 가능한 수도권내 고속도로를 분석대상으로 선정하고 기상자료와 교통자료를 수집하여 시정거리 변화에 따른 고속도로 교통류 특성변화에 관한 연구를 수행하였다. 본 연구의 수행을 위하여 기존 문헌 고찰을 통해 자료수집 및 분석방법을 수립하고 고속도로의 시정거리 수준을 선정하며, 통계적 차이 검증을 수행하고 시정거리에 따른 고속도로의 교통류 특성 변화를 분석하여 용량 및 서비스 수준 분석 시 적용할 수 있는 방안을 강구하고자 한다.

Waste stone sludge generated during the collection of crushed aggregate is difficult to use due to high moisture content. Production of 1 ton aggregate generates approximately 0.25 tons of waste stone sludge. Considering the total crushed aggregate collection in 2012 of about 100 million tons, it can be estimated that 25 million tons of waste stone sludge is generated annually. Recycling of waste stone sludge is made difficult by the high moisture content of 30%. Therefore, to make recycling this process must be a drying process, which makes a fine powder of even better quality that can use as an additive. The purpose of this study is to analyze the changes in physical properties caused by the use of dried waste stone sludge as an additive in the extrusion of cement. A test specimen was made, substituting 50% of the silica with waste stone sludge, and physical performance evaluation was performed. Results showed that 50% substitution of silica resulted in no difference in moldability, but a slight increase in the water content required for the same workability was found. Flexural strength and drying shrinkage were found to be 97% of normal levels, but satisfied the specified performance in the KS F 4735 standard.