The lightweight and high strength characteristics of aluminum alloy materials make them have promising prospects in the field of construction engineering. This paper primarily focuses on aluminum alloy materials. Aluminum alloy was combined with concrete, wood and carbon fiber reinforced plastic (CFRP) cloth to create a composite column. The axial compression test was then conducted to understand the mechanical properties of different composite structures. It was found that the pure aluminum tube exhibited poor performance in the axial compression test, with an ultimate load of only 302.56 kN. However, the performance of the various composite columns showed varying degrees of improvement. With the increase of the load, the displacement and strain of each specimen rapidly increased, and after reaching the ultimate load, both load and strain gradually decreased. In comparison, the aluminum alloy-concrete composite column performed better than the aluminum alloy-wood composite column, while the aluminum alloy-wood-CFRP cloth composite column demonstrated superior performance. These results highlight excellent performance potential for aluminum alloy-wood-CFRP composite columns in practical applications.
The purpose of this study is to provide basic data to help ensure the safety and enhance industrial competitiveness of plant construction projects by analyzing the safety management status of, mainly, chemical engineering plant construction projects, and proposing specific measures and models to reduce human/educational, technical/systemic, institutional disasters. This study was done using literature research and case study/empirical study methods. The results of this study are summarized as follows. First, we classified the major disasters from the quarterly released ‘major diaster cases in construction business’from Korea Occupational Safety and Health Agency according to the type of construction and presented the causes and prevention measures.
BIM(building information modeling) has been actively applied to construction industries and to maximize its application through the life cycle of structure, various relevant technologies have been proposed. In particular, 4D sequencing management and 5D cost-related management were introduced as an improved version of the design review and interface control by 3D information design. On the other hand, the virtual construction using virtual construction equipment can sophisticatedly handle capacity, dynamic movement, collision boundaries of actual construction machines but it still stays at a low level in a technical sense. In this study, simulation systems based on BIM involving virtual construction equipment have been developed; then it is applied to the actual construction project to evaluate the safety and efficiency of construction equipments. It was confirmed that the simulation systems can be utilized to construct virtual construction site by using an effective 3D library of construction equipment and can plays a key role to secure construction safety and economic feasibility. Specifically, the simulation system are very useful for decision making by construction managers to select the optimum equipment and construction method with a better understanding for safety and cost-saving.
This paper provides based on the research of previous researchers of the learning organization, this study selected the factors that would influence the introduction effect of the learning organization operation in the construction companies. The result of this study is that the learning organization operating system has the effect of job performance, job satisfaction, organizational commitment and ultimate The results of this study are as follows.
Artillery fire power due to effectiveness which is hard to predict well-planned and surprising attack can give a fear and shock to the personnel and is a very core weapon system and takes a critical role in wartime. Therefore in order to maximize operational effectiveness, Army required protecting artillery and takes a quick attack action through rapid construction of artillery’s positions. The artillery use artillery’s position to prevent exposure by moving to other position frequently. They have to move and construct at new artillery’s positions quickly against exposing existed place by foe’s recognition. These positions should be built by not manpower but engineering construction equipment. Because artillery positions have to protect human and artillery equipment well and build quickly. Military engineering battalion have lots of construction equipment which include excavator, loader, dozer, combat multi-purposed excavator, armored combat earthmover dump truck and so on. So they have to decide to optimal number of Team combining these equipments and determine construction sequence of artillery’s position in operational plan. In this research, we propose to decide number of Team efficiently and allocate required construction’s positions for each Team under constraints of limited equipments and time. To do so, we develop efficient heuristic method which can give near optimal solution and be applied to various situation including commander’s intention, artillery position’s priority or grouping etc. This heuristic can support quick and flexible construction plan of artillery positions not only for using various composition’s equipment to organize Teams but also for changing quantity of positions.
Most of metal cutting and processing companies are going through the difficulties such as frequent downtime and high failure rates by missing times to replace parts of CNC equipment. The reason is that the correct operation times of expensive CNC equipment can’t be calculated. In this paper, to solve this problem, we try to construct the intelligent production information system for a case company and analyze its expected effects. The effects are as follows. First, it saves money about 3 million won each year during the useful life of three years by reducing downtime and failure rates, and increasing production rates etc. Second, it makes easily find and fix the cause of faulty through traceability of the production process, and enables to perform a systematic facility management through the calculation of reliable equipment’s overall efficiency. This case can be easily applied in similar industries, and will contribute greatly to enhancing the competitiveness of related industries.
Most of metal cutting and processing companies are frequently used to mass-produce defectives by missing times to replace parts of CNC equipment. The reason is that the correct operation times of expensive CNC equipment can’t be calculated. In this paper, to solve these problems, we construct the intelligent production information system and analyze the expected effects.
ERP system has been spreaded from large companies to many small and medium sized companies, and it is recognized as a basic system for optimum and efficient work process. The focus is moving from manufacturing companies to various specialized companies. Once ERP system was introduced to those specialized companies, there was attempt to customize an ordinary system which used in manufacturing companies, but it was hard to take effect due to the lack of experience and an inadequate analysis of work process. Some of foreign ERP packages are possible to be constructed for some companies. However, they are originally aim at a large enterprise and it is also very difficult to construct and maintain. For this reason, small and midium sized companies are having a difficulty to construct ERP system. This study deals with the construction of ERP system for small and medium sized design engineering company and introduction of the crucial points throughout the construction and requirements for composition module and customization of each main module. Based on the findings of this study, the specialized non-manufacturing companies are expected to have efficient and practical application of ERP system when they select and customize the ERP package of manufacturing companies.
Value can be defined as function divided by cost. The ultimate goal of VE (Value Engineering) is to simultaneously reduce cost and to enhance function in given projects. In general, there are eight phases (Selection, Investigation, Speculation, Evaluation, Development. Presentation, Implementation, and Audit) to perform VE. This paper presents analysis of important factors for VE in construction fields using QFD (Quality Function Deployment) technique. QFD was introduced in 1972 to help design supertanker in Mitsubish's shipyards in Kob, Japan and formally defined by the American Supplier Institute in 1987 as a system for translating consumer requirements into appropriate company requirements at every stage, from research, through product design and development, to manufacture, distribution, installation, and marketing, sales and services. The objective of this paper is to provide and analyze the trend on the viewpoint of efficient value engineering of field workers. The data are collected by questionnaires. The samples for this study are chosen from 13 companies in Korea during 2 months (2002. 7 ∼ 2002. 8). The results of this study will play an important role not only for the efficient value engineering but also for preparing of life cycle cost analysis.
Initially, QFD (Quality Function Deployment) was introduced in 1972 to help design supertanker in Mitsubish"s shipyards in Kob, Japan and formally defined by the American Supplier Institute in 1987 as a system for translating consumer requirements into appropriate company requirements at every stage, from research, through product design and development, to manufacture, distribution, installation, and marketing, sales and services. Although QFD has complex and tedious procedure to complete, since 1972, it has now been used by Japanese, American, and European because of its fruitful merits. The objective of this paper is to provide and analyze the trend on the viewpoint of efficient value engineering of field workers using QFD technique as an value engineering approach. The data are collected by questionnaires. The samples for this study are chosen from 13 companies in Korea during 2 months (2002. 7 ~ 2002. 8). The results of this study will play an important role not only for the efficient value engineering but also for preparing of life cycle cost analysis.