In modern society, buildings are becoming more complex, and the population is becoming more densely populated. Such large buildings require a variety of evacuation measures, as there is a high possibility of large-scale human casualties due to increased evacuation distance and evacuation time in the event of a fire. Strobe light and exit sign light are used as important evacuation equipment to provide early warning and evacuation directions. In this thesis, we conducted a fire simulation assuming that a fire occurrence point notification function and a strobe light function were added to equipment such as visual alarms and evacuation guidance, and compared and analyzed the difference in evacuation completion time with existing equipment. The scenarios for the simulation were divided into “general fire situations” and “fire location and evacuation exit guidance situation” and the differences in evacuation completion time in the event of a fire were compared and analyzed for each floor from the 1st floor to the 3rd floor. The maximum travel distance to complete evacuation in the case of a fire on the first floor decreased by 80.6 m and the evacuation completion time decreased by 329.4 seconds, and the maximum travel distance to complete evacuation in the case of a second-floor fire decreased by 28.5 m and the evacuation completion time by 438.8 seconds. During the fire on the third floor, the maximum distance decreased until evacuation was completed to 3.4 m, and the evacuation completion time was reduced by 355.6 seconds. It is expected that if the congestion level of evacuation routes is reduced by utilizing the congestion level of evacuation exits when fire alarm systems and evacuation equipment are activated, the evacuation completion time will be further shortened and evacuations will be carried out quickly and safely.

The purpose of this study is to use an evacuation simulation program to measure the change in evacuation time according to the width of the evacuation route due to the installation of an intermediate sales counter and the placement of a shopping cart between the sales counters of a large supermarket and to analyze the results. Currently, the “Distribution Industry Development Act” does not regulate the size and installation method of intermediate sales counters installed between sales counters that serve as practical evacuation routes in the event of a fire at a large supermarket, the size of shopping carts, etc. Considering this, we set evacuation route widths of 40, 50, 60, 70, 80, and 100 cm and compared and analyzed evacuation times according to various variables in the facility space. As a result of the experiment, as the width of the evacuation route was expanded, there was a significant difference in the evacuation time, from a maximum of 468.3 seconds to a minimum of 320.8 seconds. Considering the safety of evacuees in large supermarkets used by many people, it is time to regulate the size of intermediate sales stands installed between sales counters in large supermarkets and shopping carts that can become obstacles in an emergency.

많은 승객이 이용하는 여객선 등, 선박의 사고 예방을 위해 안전과 관련된 규정이 매년 강화되고 선박에 적용하고 있지만 선 박에서의 사고는 감소하지 않고 있다. 선박에서의 화재 사고 시 화재 발생 위치에 따라 승객의 탈출 시간이 변화하고, 유해 요인에 의한 위험성이 증가할 수 있다. 화재 위치 변화에 따른 유해 요인들의 위험성과 탈출 시간지연의 원인을 파악하고, 시간지연을 감소시키는 방 안을 모색하기 위한 연구를 진행하였다. 선박 승객 거주 구역 화재 시 연소생성물의 유동과 승객의 탈출 과정을 확인하기 위해 FDS를 기반으로 하는 Pyrosim과 Pathfinder를 이용하여 화재 및 승객 피난 시뮬레이션을 진행하였다. 화재 발생 위치 변화에 따라 탈출로의 가시 거리 평균값은 3.1m에서 4.2m로 탈출 과정에서 안전하지 않고, 승객의 탈출 시간은 화재가 발생하지 않은 경우보다 9초에서 34초가 늘어 나는 것을 확인하였다. 안전성 향상 방안인 제연설비를 임의로 적용하여 동일 시뮬레이션 진행하였다. 화재 구역의 평균 가시거리는 14.9m에서 22.0m까지 증가하여 개선되는 것을 확인할 수 있다. 제연설비 설치 여부에 따라 0.8초에서 8.3초의 탈출 시간이 개선되었다. 해당 구역의 안전성 향상 방안을 적용한 결과, 적정한 제연설비가 작동된 이후로 연소생성물에 의한 승객의 위험성이 감소함을 확인할 수 있다.

본 논문에서는 몬스터에게 붙잡히지 않고 키를 찾아서 연구소를 탈출하는 공포 방탈출 게임을 제안한다. 제 안하는 게임을 진행한30명의 게임 플레이 로그 데이터 분석 결과와 설문조사 결과를 바탕으로, 제안하는 게 임의 특징을 분석한 결과는 다음과 같다. 첫째, 제안하는 게임은 다양한 아이템, 액션, 탈출 경로를 제공한다. 제안하는 게임이 숨을 곳도 많고 다양한 상호작용을 제공한다고 설문에서4점 이상 주었다. 또한, map의 footprint를 분석한 결과, 플레이어는 다양한 경로를 통해 키를 찾아서 탈출하였다. 둘째, 제안하는 게임은 외 관으로 기능을 추론할 수 있는 직관적인 오브젝트를 제공한다. 따라서, 플레이어는 시각적 공간 및 게임 아 이템 용도를 쉽게 파악하여 조작할 수 있다. 설문조사 결과에서, 플레이어는 조작감 관련 항목의 점수를4점 이상을 주었다. 셋째, 제안하는 게임에서 플레이어는 아이템이 충분할 때보다는 부족할 때 더 몰입을 잘 한 다. 게임 플레이 로그 데이터 분석 결과와 설문조사 결과에 따르면, 플레이어는 아이템이 부족할 때 더 크게 공포를 느끼고 상황에 몰입하여, 더 적극적으로 행동하게 되고 더 민감하게 반응한다.

The purpose of this study is to propose measures to increase evacuation safety by calculating the habitable time using a fire and evacuation simulation program for the Room-escape cafe currently in operation, and comparing and analyzing it with the evacuation required time. Assuming a fire due to overheating of electric heaters in use in front of the warehouse, the habitable time was calculated through fire simulation, and the occupant's evacuation time calculated through evacuation simulation according installation of safety facilities, etc. was compared and analyzed with the habitable time. In the case of escape room cafes with safety facilities installed, evacuation safety was satisfied, but in escape room cafes without safety facilities, the evacuation safety was not secure. As a result of analyzing evacuation safety for each scenario based on the ASET analyzed in the fire simulation, it was found that in scenario 1, evacuation safety was secured and everyone successfully evacuated, while in scenario 2, no one succeeded in evacuation. These results can be said to confirm that the installation of safety facilities is very important in business establishments such as escape room cafes, which become enclosed structures when games are started.

In this study, for the purpose of reducing the catch of small giant octopus in a net pot, an escape experiment of octopus was performed on five types of escape rings of different sizes. As a result of the experiment, the smallest giant octopus with a weight of 406 g was found to escape from an escape ring with a diameter of 30 mm or larger, and 592 g octopus, a weight similar to the octopus of the current minimum landing weight (600 g), escaped from an escape ring with a diameter of larger than 40 mm. An individual weight with 406 g becomes 39 mm when converted from a diameter of 25 mm circular escape vent; that is, the circumference to the inner diameter of the mesh. It can be inferred that the converted mesh size of 39 mm cannot escape. Logistic regression analysis was performed using a generalized linear model (GLM) to investigate the correlation between the ratio of escape ring size/Mantle diameter (R/MD) and the escape rate. As a result, it was found that there was a significant correlation between the R/MD ratio and the escape rate and that the higher the R/MD ratio, the greater the escape rate. As a result of logistic regression analysis, the R/MD value was denoted 0.520 with the 50% escape rate. In addition, it can be estimated to be about 50 mm when converted to the mesh size. Therefore, in this study, the diameter of the escape ring and the size of the escape possible of the octopus were experimentally considered. It was found that there was a significant correlation.

This study aims to understand the opening efficiency of the finless porpoise escape guide net by the type of extension net that is the part to which the escape guide net is attached in stow net. To this end, extension nets were manufactured in full size and the net mouth area and towing tension were investigated according to the towing speed (0.2, 0.4, 0.6 and 0.8 m/s) and the type of extension net (25 mm net and raschel net) in the water tank. As a result, the net mouth area of the guide net was larger when the raschel net was used for the extension net than when the 25 mm net was used under all towing speeds. In addition, regardless of the type of extension net, the net mouth area reached about 80% of the maximum value at a towing speed of 0.4 m/s. In the field, fishing operation of stow net is performed only when the current speed is above 0.4 m/s. Therefore, the speed of 0.4 m/s was confirmed as a meaningful value to determine whether it is possible to operate. As a result of analyzing the relationship between the net mouth area of the guide net and the towing tension, it was confirmed that the difference in the net mouth area of the guide net according to the type of the extension net was due to the difference in the solidity ratio.