상태 기반 페리다이나믹 모델은 일반적인 재료 구성 모델을 구현할 수 있고 비국부 영역 내에서 연결된 모든 결합의 변형을 통해 각 절점의 재료 응답이 결정되기 때문에 체적 및 전단 변형을 모두 표현할 수 있다. 따라서 상태 기반 모델은 복잡한 동적 취성 파괴 현상(분기균열, 2차 균열, 계단균열, 균열 유착 등)을 해석하는데 유용하다. 본 논문에서는 평면응력 탄성체에 대해 2차원 상태 기반 페리다이나믹 모델을 적용하고 에너지해방율과 페리다이나믹 에너지 포텐셜로부터 손상 모델을 구성하였다. 페리다이나믹 파괴 해석 모델을 통해 취성 유리 재료에 대해 균열 면에 평행한 압축 응력파가 균열 분기 패턴에 미치는 영향에 대해 조사하였다. 실험을 통해 관찰된 동적 균열 진전 및 분기 패턴에 대한 주요 특성들이 페리다이나믹 해석을 통해 확인되었다. 또한 강한 인장 하중 하의 계단균열과 이차균열 등이 상태 기반 페리다이나믹 시뮬레이션을 통해 잘 모사가 되는 것을 확인할 수 있었다.

결합 기반 페리다이나믹 모델을 통해 다양한 동적취성파괴 현상을 해석할 수 있었지만, 결합 기반 모델은 다양한 재료 구성 모델을 표현하는데 여러 한계를 보여왔다. 특히 결합 기반 모델은 각 결합들이 서로 독립적으로 작용하도록 가정하였기 때문에 3차원 모델에서 포아송비가 1/4로 고정되며 전단 변형이 표현되지 못하고 체적 변형만이 모사되는 문제점이 있다. 본 연구에서는 상태 기반 페리다이나믹 모델을 통한 동적취성파괴 해석을 제시한다. 상태 기반 모델은 일종의 일반화된 페리다이나믹 모델로서 일반적인 재료 구성모델로부터 직접 페리다이나믹 재료 모델을 구성한다. 또한 연결된 모든 결합의 변형을 통해 각 절점의 재료 응답이 결정되기 때문에 체적 및 전단 변형이 모두 표현된다. 본 논문에서는 선형 탄성체에 대해서 상태 기반 평면 응력 페리다이나믹 모델을 소개하고 상태 기반 모델에 적합한 손상 모델에 대해 논의한다. 페리다이나믹 비국부 영역을 축소시키는 δ-수렴성 연구를 통해 동적파괴 모델을 검증하고 상태 기반 모델이 동적 균열 전파를 모델링하는데 적합함을 확인하였다.

PURPOSES : In this study, a fracture-based finite element (FE) model is proposed to evaluate the fracture behavior of fiber-reinforced asphalt (FRA) concrete under various interface conditions. METHODS: A fracture-based FE model was developed to simulate a double-edge notched tension (DENT) test. A cohesive zone model (CZM) and linear viscoelastic model were implemented to model the fracture behavior and viscous behavior of the FRA concrete, respectively. Three models were developed to characterize the behavior of interfacial bonding between the fiber reinforcement and surrounding materials. In the first model, the fracture property of the asphalt concrete was modified to study the effect of fiber reinforcement. In the second model, spring elements were used to simulated the fiber reinforcement. In the third method, bar and spring elements, based on a nonlinear bond-slip model, were used to simulate the fiber reinforcement and interfacial bonding conditions. The performance of the FRA in resisting crack development under various interfacial conditions was evaluated. RESULTS : The elastic modulus of the fibers was not sensitive to the behavior of the FRA in the DENT test before crack initiation. After crack development, the fracture resistance of the FRA was found to have enhanced considerably as the elastic modulus of the fibers increased from 450 MPa to 900 MPa. When the adhesion between the fibers and asphalt concrete was sufficiently high, the fiber reinforcement was effective. It means that the interfacial bonding conditions affect the fracture resistance of the FRA significantly. CONCLUSIONS: The bar/spring element models were more effective in representing the local behavior of the fibers and interfacial bonding than the fracture energy approach. The reinforcement effect is more significant after crack initiation, as the fibers can be pulled out sufficiently. Both the elastic modulus of the fiber reinforcement and the interfacial bonding were significant in controlling crack development in the FRA.

In this paper, we study the calculation for the fracture area of the tension specimens using digital image processing techniques. This study was able to calculate the area of the fracture region on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

This study is a part of high strength lightweight aggregate concrete researches using lightweight aggregates and the purpose of this study is to find out the basic physical characteristics and tension cracking fracture characteristics of lightweight concrete. Crack Mouth Opening Displacement is measured through three point flexure experiment about embellish notch beam. Load-CMOD characteristics are examined through rules of countries, characteristics of lightweight concrete and tension cracking fracture experiments. The degree of tensile characteristic alteration according to size changes of specimen and the characteristics about crack surface are analyzed. The changes of softening curve are analyzed and fracture energy is drawn through inverse analysis by the obtained Load-CMOD curve. To decide fracture energy and analysis parametric, inverse analysis is conducted and Ant Colony Method is conducted for optimization and then a way to find out optimal parameterization fracture energy is suggested.

목 적 : 확산강조영상은 골격근 손상이 있을 때 조기에 근육의 신호강도 변화를 알 수 있고 양성과 악성 척추 압박골절의 감별 진단에 유용하다고 보고 되고 있지만 질환에 따른 현성확산계수(Apparent Diffusion Coefficient:ADC)의 연구는 많이 보고 되고 있지 않다. 이에 단순 압박 골절과 전이성 척추암이 b value에 따라서 어떠한 변화가 있는지를 알아보고자 본원에서 시행하고 있는 b value 0 400,1400(s/mm²)를 이용하여 각각의 Signal Intensity의 표준화된 값과 물 분자의 확산 정도를 수치화 하는 ADC, 그리고 신호대 잡음비(Signal to Noise:SNR)를 비교하였다. 대상 및 방법 : 2013년 3월부터 2013년 12월까지 MR판독에서 단순복합골절과 전이성 척추암을 의심하는 환자 중 전자의무기록상 확정된 환자로 두 질환 별로 11명씩 총 22명을 대상으로 하였고 평균연령은 각 질환 별로71.2, 56.6세다. 검사장비는 1.5 Tesla Achieva MRI시스템과 Syn-Spine Coil를 사용하였다. Sequence는 DWI SE-EPI Sagittal(Diffusion Weighted Imaging Spin Echo-Echo Planar Imaging Sagittal)영상으로 TR(ms) 1988, TE(ms) 68, FOV(mm) 300, Mat. 128×128, Thk.(mm) 4, Gap(mm) 0.4, Slice 13, b-factor(s/mm²) 0,400,1400의 Parameter를 이용하였다. 데이터 분석은 확산강조영상 b value 0(s/mm²) 영상에서 SI(Signal Intensity)가 높은 질환 부위에 ROI(Region of Interest)를 잡았고 정상부위는 질환부위 바로 위에서 측정하였다. MRIcro Program을 사용하여 b-value 0, 400, 1400(s/mm²)의 영상으로 각각의 SI를 구하였고 b-value의 각 영상을 가지고 Metlab Software를 이용하여 ADC map을 구하여 이 영상을 가지고 MRIcro Program을 사용해 동일한 위치에 ROI를 적용하여 ADC를 구하였다. 데이터 분석은 첫째 두 질환 별로 b value 0 기준으로 400, 1400(s/mm²)의 SI를 표준화하여 비교 분석하였고(SI400/SI0, SI400/SI0) 둘째 두 질환의 정상부위와 질환부위의 ADC와 SNR를 비교 분석하였다. 통계의 유의성은 MS Excel 의 T-Test를 이용하였다. 결 과 : 단순압박골절의 표준화 값(SI400/SI0, SI400/SI0)은 0.47±0.04, 0.23±0.03이고 전이성 척추암의 표준화 값 (SI400/SI0, SI400/SI0)은 0.57±0.07, 0.32±0.08로 나왔고 두 질환 별 표준화 값은 통계적으로 유의하게 나왔다 (p<0.05). 단순압박골절 질환부위의 b value 400(s/mm²)과1400(s/mm²)에 대한 ADC(mm²/s)는 1.70±0.16, 0.93±0.28이고 전이성 척추암은 1.24±0.21, 0.80±0.15로 측정되었다. 두 질환에서 b value 400(s/mm²)에 대한 ADC(mm²/s)는 통계적으로 유의하게 나왔으나(p<0.05) b value 1400(s/mm²)에 대한 ADC(mm²/s)는 유의하지 않았다(p>0.05). 단순압박골절과 전이성 척추암 질환부위의 b value(0/400/1400(s/mm²) 에 따른 SNR 보면 65.61±2.61/36.32±2.92/20.22±2.16, 48.40±2.72/39.27±7.51/23.02±6.25로 측정되었다. 결 론 : 위 연구는 본원에서 검사하고 있는 b value 0,400,1400(s/mm²)을 이용하여 연구를 하였으며 b value 400(s/mm²)에서 두 질환에서의 표준화 된 값과 현성확산계수의 확연한 차이가 있었다. 결론적으로 일반적인 척추 자기공명영상 검사와 병행하여 확산강조영상의 현성확산계수를 가지고 다양한 척추 질환에 적용시킨다면 보다 정확한 진단에 도움이 될 거라 사료된다. 본 연구의 제한점으로 다양한 b value를 적용하지 못했고 성별, 나이, 각 질환의 병기 및 시기, 전이암의 최초 발병 부위를 정립하지 않았으며 측정 부위를 조영제를 사용한 영상이 아닌 단순히 b value 0(s/mm²)에서 고신호 강도가 나오는 곳의 데이터로 결론을 도출한 점은 앞으로 보완해야 할 것이다.

A method is developed to simulate the fatigue crack growth in a carburized gear tooth considering the effect of residual stress. The calculation of stress intensity factor and the fatigue crack growth rates in the case layer are estimated by the experimental formula obtained in this study. The crack growth of carburized gears is measured by a crack gauge, and the validity of the simulation is confirmed. The critical length of initial crack which corresponds to the fatigue strength is introduced in the method, and a new design procedure of carburized gears is proposed based on the critical length of crack. As an example of the application of the procedure, the size effect is tried to discuss.

In this study, the effect of stacking sequence on the flexural and fracture properties of carbon/basalt/epoxy hybrid composites was investigated. Two types of carbon/basalt/epoxy hybrid composites with a sandwich form were fabricated: basalt skin-carbon core (BSCC) composites and carbon skin-basalt core (CSBC) composites. Fracture tests were conducted and the fracture surfaces of the carbon/basalt/epoxy hybrid composites were then examined using scanning electron microscopy (SEM). The results showed that the flexural strength and flexural modulus of the CSBC specimen respectively were ~32% and ~245% greater than those of the BSCC specimen. However, the interlaminar fracture toughness of the CSBC specimen was ~10% smaller than that of the BSCC specimen. SEM results on the fracture surface showed that matrix cracking is a dominant fracture mechanism for the CSBC specimen while interfacial debonding between fibers and epoxy resin is a dominant fracture process for the BSCC specimen.

본 논문은 그래핀의 모드 I 균열 진전에 대한 분자동역학 해석과 수치보조장을 사용하는 영역 투영 방법의 역문제 해석방법을 결합하여 균열 선단 응집 법칙을 평가하는 효율적인 방법을 제시하고 있다. 그래핀의 균열 선단 응집 법칙을 결정하는 것은 균열 선단에서 멀리 떨어진 영역의 변위를 사용하여 균열 면에서 미지의 응집 트랙션과 열림 변위를 구하는 역문제를 해석해야 하는데 상호 J-적분과 M-적분의 경로 보존성과 효율적인 수치보조장을 사용하는 방법을 적용하였다. 분자동역학 해석에서 원자 변위를 유한요소 절점 변위로 이동최소자승법을 사용하여 근사하였으며 안정적인 역문제 해석을 통하여 원자 단위의 거동을 연속체 해석으로 연결시킬 수 있는 새로운 방법을 보여주었다.

It has been demonstrated in a previous study that carbon nanotube (CNT)/epoxy/basalt composites produce better flexural properties than epoxy/basalt composites. In this study, mode I fracture tests were conducted using CNT/epoxy/basalt composites with and without seawater absorption in order to investigate the effect of the seawater absorption on the mode I fracture toughness (GIC) of the CNT/epoxy/basalt composites. The results demonstrated that the compliance of the seawater-absorbed specimen was larger than that of the dry specimen at the same crack length, while the opposite result was obtained for the fracture load. The GIC value of the seawater-absorbed CNT/epoxy/basalt composites was approximately 20% lower than that of the dry CNT/epoxy/basalt composites.

In this study, carbon/epoxy composite DCB(double cantilever beam) specimens based on K-means clustering and wavelet transform analyses are presented. For the fracture Mode I, the fiber orientation θ = [0 ]24 and θ = [±45]12 both shown up stable crack growth in DCB testing. For the fiber orientation θ = [0 ]24 , the continuous type AE signal showed at central frequency 130～270kHz, which means that matrix micro cracking was occurred. The Burst type AE signal was occurred at central frequency 200～300kHz due to fiber bridging and fiber breaking. Other burst type AE signals were occurred at central frequency 130～180kHz with very high amplitude due to fiber bridging. For the fiber orientation θ = [±45]12 , the burst type signal showed at central frequency 220～300kHz, which means that fiber breaking was occurred. Mixed type of burst and continuous signals were captured at central frequency 250～480kHz due to fiber friction.

Aluminum foam as porous material in wide use has the excellent mechanical and thermal properties. As adhesive process technique is used by bonding such composites as aluminum foam, fracture toughness at adhesive joint is the main point to investigate. In this study, DCB specimens are manufactured to evaluate the strengths at adhesive joints on the basis of British industrial and ISO international standards. Four kinds of specimens are made by changing the height of the specimen and these experimental results are compared with each other. Energy release rates are also calculated at mode I. As the hight of specimen becomes higher, reaction force and energy release rates become higher. Through the correlation obtained by this study result, aluminum foam material bonded with adhesive can be applied to the real composite structure and mechanical property and fracture toughness are analyzed systematically.

본 논문에서는 섬유강화 복합재에 대해 균질화법과 접목된 페리다이나믹 전산해석 방법론을 제시하였다. 복합재료에 대 해 제시된 해석모델로 동적 취성 파괴 및 손상해석을 수행하였다. Coker 등(2001)에서 제시된 비대칭 하중 하의 섬유강화 복합재의 동적 파괴 실험결과와 비교하여 페리다이나믹 비국부 해석모델이 다양한 동적 파괴특성 및 극초음속으로 균열이 진전되는 것을 잘 모사할 수 있음을 검증하였다. 또한 대칭 하중조건에 대한 해석결과와 비교하여 비대칭 하중이 더 높은 균열전파 속도를 유발하는 것을 확인하였다. 수치해석 결과들이 실험 결과들에 부합함을 또한 확인하였다.

Aluminum foam with the property as the excellent impact absorption has been widely used recently. It is necessary to study fracture energy due to fracture toughness by the use of adhesive joint at aluminum foam. This study aims at strength evaluation about adhesive joint on aluminum foam and the fracture of bonded DCB model with this material property is analyzed by simulation. These models are designed by differing in height on the basis of British industrial and ISO standards. As the value of height at model is higher, bonded part is separated to the end. By comparing some analysis results with experimental data, these data could agree with each other. By the verification with experimental results, these all simulation results in this study can be applied on real composite structure with aluminum foam material effectively. The fracture behavior and mechanical property can also be examined by this study.

In the present work, exfoliated graphite nanoplatelets (EGN) of 1 μm in average particle size, which were prepared by heating at 900℃ and then subjected to ultrasonic, ball-milling, and vibratory ball-milling techniques, were uniformly incorporated into phenylethynyl-terminated polyimide (PETI-5) resin. The fracture surface morphology and the electrical resistivity of the EGN/PETI-5 composites were investigated. The results showed that the fracture surfaces and the electrical resistivity strongly depended on the EGN content. The fracture surfaces became more ductile and roughened with increasing EGN and the electrical resistivity was gradually decreased with increased EGN loading, indicating the percolation threshold at 5 wt% EGN.

A nine-month-old male Pekingese weighing 5.7 kg was admitted to the Veterinary Medical Center at Chungbuk National University with a history of acute nonambulatory tetraparesis after minor trauma. A diagnosis of atlantoaxial instability with a dens axis fracture was based on examination of survey spinal radiographs and was confirmed during surgery. A modified ventral fixation technique using cortical screws was used for stabilization of the atlantoaxial joint. Serial evaluation based on radiographic and neurologic assessment was performed eight weeks after surgery. Symptoms of tetraparesis disappeared gradually, and arthrodesis of the atlantoaxial joint using a ventral fixation technique has maintained stable fixation.