본 연구는 사과나무 ‘홍로’와 ‘후지’의 내재휴면 기간 중 휴면타파에 유효한 한계온도 범위를 알아보고자 수행 하였다. 저온 축적에 의한 내재휴면 타파 여부를 확인하기 위하여 온도 처리구별로 발아율을 조사한 결과 ‘홍로’ -5℃ 처리구를 제외한 모든 처리구에서 발아율이 50% 이상으로 나타났다. 또한 ‘후지’의 온도 처리구별 발아율은 -5℃ 처리구에서도 86.3%로 휴면이 타파되었다. 탄수화물과 무기성분의 변화는 처리간 유의한 차이는 있었으나 일정한 경향이나 특이한 변화를 나타내지 않았다. 그러나 유리당 분석 결과 sorbitol 함량은 휴면 타파 여부에 따라 휴면이 타파되지 않은 ‘홍로’-5℃ 처리구의 경우 29.62mg/g으로 높게 나타났으며, 휴면이 타파된 것 으로 판단되는 처리구는 낮은 수준이였다. 호르몬 분석 결과 휴면이 타파되지 않은 ‘홍로’ -5℃ 처리구의 경우 ABA (abscisic acid)와 JA (jasmonic acid)는 각각 176.48, 15.72ng/g으로 높게 나타났으며, 모든 처리구에서 휴면이 타파된 것으로 나타난‘후지’의 경우 ABA, JA, SA(salicylic acid) 함량이 ‘홍로’ 품종보다 유의하게 낮게 나타났다. 본 연구 결과 휴면 타파에 유효한 한계 온도 범위는 품종에 따라 다르며 ‘홍로’는 -5℃에서 발아율이 30.3%로 휴면이 타파되지 않은 것으로 나타났으 며, ‘후지’는 0℃ 이하인 -5℃에서도 86.3%로 높게 나타나 저온 축적의 효과가 있는 것으로 판단된다.
The effects of an abdominal drawing-in maneuver (ADIM) using a pressure bio-feedback unit (PBFU) were compared to the effects of a pelvic belt (PB) on the muscle activities of the hip and back extensor muscles during hip extension in the prone position. Fifteen healthy male participants all performed prone hip extensions under three conditions: 1) preferred hip extension (PHE), 2) performing an ADIM, and 3) using a PB. The muscle activities of the erector spinae, the gluteus maximus, and the medial hamstring on the right side were recorded by surface electromyography. The muscle activity of the erector spinae was significantly lower while performing an ADIM during prone hip extension than during PHE or with a PB (p<.05). Gluteus maximus muscle activity was significantly higher while performing an ADIM (p<.05). No significant difference was found for the medial hamstring muscle among the three conditions (p>.05). We concluded that the internal stabilization of the pelvis and lumbar spine afforded by the ADIM using a PBFU could be more effective than the external stabilization provided by a PB in terms of increasing selectively gluteus maximus activation during prone hip extension.
This study examines the impact of the perception that employees of contract foodservice management companies have of internal marketing on service quality. Questionnaires were delivered to 291 employees employed in foodservice management companies. High perception item of internal marketing was 'value of formula education program' (3.36 points), whereas 'adequate allowance disbursement' (2.62 points) and 'various vacation benefits' (2.66 points) scored low. High service quality items for customers were 'kindness to customers' (3.89 points) and 'willingness to help customers' (3.89 points), whereas 'comprehension of customers' special requests' (3.63 point) and ['meeting customer expectations'] (3.64 points) scored low. The internal marketing conceived by employees of contract foodservice management companies has a positive influence on service quality. The most influential internal marketing variable to affect service quality was 'communication' followed by 'education/environment' and 'fringe benefits/[decisive] delegation'.
The influence of the internal current for the ZnO ceramics on the sintering behavior by pulse current sintering (PCS) method was investigated. To clear the dependence of inner current on the sintering behavior of ZnO ceramics, direct measurement of electric resistance of ZnO specimen under sintering by SPS device was carried out. It was observed that electric resistance of specimen decreases with increase in the temperature. The electric resistance begins to decrease from the low temperature of . The internal structure of sintered ZnO ceramics changed by the control of the internal current in the specimen using plate.
건물기초롤 지진절연하면 건물뿐만 아니라 그 내부구조물의 지진웅답도 크게 감소한다는 사실이 많은 연구
를 통해 확인되어 왔다. 그런데 이러한 내부구조물이 유체내에 잠기고 부가질량효과가 크게 작용되는 조건에
놓이는 경우 오히려 지진응답이 중가할 수 있다. 본 논문은 건물 내 수중구조물의 지진해석올 통해 그러한 예
를 제시하고자 한다. 해석결과 지진절연된 건물의 경우 이러한 내부 수중구조물의 지진웅답이 상당히 증가할
수 있기 때문에 이에 대한 조치가 필요함을 보였고, 적절한 설계에 의하여 부가질량효과를 조절함으로써 어느
정도 응답을 줄일 수 있다는 사실을 알 수 있었다.
In this paper, the behaviour of cavitation erosion, influence of corrosion and corrosion control on slide bearing metals for internal combustion engine were investigated, and this experiment was done by the vibratory cavitation erosion tester. The main results obtained are as follows: 1. With decreasing the space between horn and specimen, the weight loss and its rate increased step by step. But the weight loss and its rate of 0.2mm space decreased conversely more than that of 0.4mm space at early stage. 2. The weight loss and its rate with change of pH were appeared to the order of pH2>pH12>pH7>pH4. And the weight loss and its rate at pH 4 decreased at best. 3. The weight loss and its rate by cavitation erosion for bearing metals were shown to the order of W.M7>W.M1>K.M4. 4. There appeared mainly small pit hole at pH2, and appeared the pit of netting thread type at pH12 by the results of the damaged surfaces at pH2 and pH12 environments that were sensitive to cavitation erosion. 5. With increasing the viscosity of lubricating oil, the weight loss rate by cavitation erosion became dull at the space below 0.5mm. 6. The protective efficiency of cavitation erosion-corrosion is superior inhibitor of chormate(25 ppm) to cathodic protection.
The research purpose of the article is to evaluate the effects of the internal control components on the effectiveness of internal control of transport construction enterprises in Vietnam, on the basis of which we made recommendations to contribute to improving the effectiveness of internal control. Sample was collected from Vietnamese medium and large transport construction enterprises, the total number of sample questionnaires sent was 400, 330 filled-up questionnaires was collected and 250 was used for the study purpose. Quantitative research method was used for the study with the help of the SPSS software. The variables in the model are as follows: the dependent variable is the effectiveness of internal control, 5 independent variables are: control environment, risk assessment, control activities, communication, and monitoring. The results of the analysis explain 80.4% variation as a result of the effect of internal control on the Vietnamese transport construction enterprise. All five components positively affect the effectiveness of internal controls in the order of influence, which are: control activities, control environment, communication, risk assessment and monitoring. This study contributes in providing more empirical evidence about the effects of internal control components on the effectiveness of internal control of transport construction enterprises in Vietnam. The study has proposed a number of recommendations to help transport construction enterprises improve control activities and contribute towards improving the effectiveness of internal control.
This study aims to analyze the influence of apparatus resources, organizational commitment, internal control on the accountability of village fund allocations with the level of education as a moderating. Accountability analysis of village fund allocation is carried out at every stage of planning, implementation stage, administration stage, reporting stage, and accountability stage. The study was conducted in 18 villages in Undaan District, Kudus Regency - Indonesia, with a total sample of 115 village officials. Structural Equation Model analysis techniques with Warp Partial Least Square were used to test the research hypotheses. The results showed that apparatus resources, organizational commitment, and internal control had a positive effect on the accountability of village fund allocations. The level of education strengthens the influence of apparatus resources on the accountability of village fund allocations. The findings of the study further prove that commitment has positive implications for achieving accountability. It means that the higher the commitment made by the government apparatus, the better and higher the effect on accountability in managing public funds. With an ethical commitment of the government apparatus in managing the budget, the use of funds can be in accordance with the planning and designation so that goals can be achieved.