이 연구에서는 RC 연결구조를 갖는 교량의 장기거동을 확인하기 위한 현장조사를 수행한다. 우선, 온도계 센서, 변위 센서, 변형률게이지를 설치하고, 3년 6개월동안 현장계측을 수행하였다. 현장계측 결과, 수축변위는 동일한 온도변화에서 흉벽에 작용하는 뒷채움제의 토압의 영향으로 인해 신장변위보다 크게 나타났다. 또한, 상부구조 변위는 하부구조의 강성의 영향으로 인해 하부구조보다 크게 나타났다. 변형률 측정 결과, 보강재의 응력은 온도변화에 따른 압축응력과 인장응력의 반복이 원인인 것으로 나타났다.

Tunnel is the main infrastructure in transportation system especially in Gangwon province which has 90% of its area covered by mountains. Responding to the needs for evaluating the tunnel damage in this region, the temperature inside 10 tunnels, one-way and two-way, were measured in winter by using temperature sensors. The temperatures along the length of tunnel, from the entrance until the exit, were obtained from sensors placed at 2 meters above the road. The measurement results showed the distribution of the temperature along the length of the tunnels since November 2016 until March 2017. The data showed that among all the one-way tunnels, the variation of the temperature at all positions along the length of the tunnels have almost the same gradient of temperature of all months observed. There were no significant changes between the temperatures at those points along the tunnel; whereas the changes at the entrances and the exits of the tunnels were remarkable. It was also noticed that there was the different trend of temperature variation between the one-way and two-way tunnels.

This study investigates dynamic characteristics of a 2MW wind turbine structure by long-term response monitoring with accelerometers, tiltmeter and strain gauges. The object wind turbine structure is located in Jeju Island, Korea. The natural frequency and damping ratio were evaluated by least-square frequency domain decomposition and random decrement technique using acceleration response data. As a result, it was found that natural frequencies with 1st, 2nd and 3rd modes, and blade passing frequencies with 1P, 2P and 3P were clearly showed from power spectral densities of acceleration reponses. Furthermore, 1st model frequencies were almost constant with increase in standard deviations of acceleration responses. Another notable observation was that when standard deviations of acceleration responses were small, damping ratios showed to diverge. However, when standard deviations of acceleration responses had large values, damping ratios were converged to about 0.5%.

철도교의 장기변위 정보는 시공 및 유지관리에 있어 매우 유용하지만, 실구조물의 장기간에 걸쳐 발생하는 변위를 정확하게 계측하기 위해서는 많은 실질적인 문제를 해결해야 한다. 본 연구에서는 철도교량의 효과적인 장기변위 계측을 위해, 컴퓨터 비전 기반의 비접촉식 기법을 제안한다. 컴퓨터 비전 기반 기법은 비용적인 측면에서 우수하며 사용이 간편하여 최근 교량변위 계측을 위해 기술개발이 활발하게 되고 있으나, 카메라의 미소변위에 의해 큰 오차가 발생하므로, 장기변위의 계측에는 적합하지 않다. 본 연구에서는 두 개의 카메라를 이용하여 카메라 변위에 따른 오차를 보정하는 방식으로 장기변위 계측을 가능하게 하였다. 개발된 기법을 시공 중인 철도교량에 적용하여 성능을 검증하였다.

The camera movement can cause considerable error in the computer vision-based displacement measurement because the camera is generally placed far from the region of interest. The camera movement, which is difficult to avoid particularly in the long-term measurement, hinders real-world applications of the computer vision-based displacement method. This research proposes a practical means of long-term displacement measurement by using a novel camera system. In addition to the conventional camera-based measurement, an auxiliary camera is used to compensate the camera motion-induced error. Experimental validation is conducted in the laboratory environment.

Recently, many concrete slab tracks have been adopted in high-speed railway. However, it is vulnerable to roadbed settlement compared to gravel tracks. Therefore, it was necessary to evaluate the long-term performance about roadbed and track of the concrete slab track. In this paper, the performance of track and roadbed is evaluated using long-term high-speed rail data. The measurement items are the Wheel load, Lateral load, Acceleration, Road pressure. The measurement period is from the beginning of construction to three years after opening. For the measurement method, a representative value of the measurement data was selected and compared with the reference value.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.

We have studied the optimum location of the sensor to evaluate the condition of the structure by performing the structural analysis on the landing pier. It is judged that it is appropriate to place the strain sensor of the landing pier at the upper part, the middle part and the upper part of the pile at 30% below the pile.