Our study has analyzed whether inappropriate gonadotropin secretion affects the morphological changes due to the activation of intrauterine MMP. Methods A total of each 6 mice were injected with PMSG, Progesterone, and Androgen in 5 IU of intraperitoneal injection every 2 days after estrus synchronization, and morphological and MMPs expression patterns were compared after inducing hormone secretion. Also, cell survival and death related genes were compared and analyzed. The endometrium was highly developed in the PMSG, and the androgen was not developed at all. In particular, the diameter of the uterus of the Androgen group was also very narrow. MMPs activity assay in the case of PMSG was confirmed that showed low activity, whereas, progesterone and androgen In showed high activity and, in particular, very high activity of MMPs in the case of androgen in glandular cell. The expression of VEGF in the tissues of each group was different from that of MMPs. In the PMSG group, the activity of VEGF was increased in both the Myo-metrium and the endo-metrium, whereas the progesterone group showed low overall expression in the endo-metrium. Therefore, the present study showed that the activities of the endo-metrial cells and the restructuring of the endometrial cells differed according to the type of the abnormal secretory hormone. In particular, the secretion of androgen increased the activity of MMPs throughout the uterus, The endo-metrial epithelial cells are affected by the progesterone group. In conclusion, this study suggests that inappropriate gonadotropin secretion increases the functional changes of the uterus and this reconstruction may be caused by increased activity of MMPs

ZnO crystals with different morphologies are synthesized through thermal evaporation of the mixture of Zn and Cu powder in air at atmospheric pressure. ZnO crystals with wire shape are synthesized when the process is performed at 1,000 oC, while tetrapod-shaped ZnO crystals begin to form at 1,100 oC. The wire-shaped ZnO crystals form even at 1,000 oC, indicating that Cu acts as a reducing agent. As the temperature increases to 1,200 oC, a large quantity of tetrapod-shaped ZnO crystals form and their size also increases. In addition to the tetrapods, rod-shaped ZnO crystals are observed. The atomic ratio of Zn and O in the ZnO crystals is approximately 1:1 with an increasing process temperature from 1,000 oC to 1,200 oC. For the ZnO crystals synthesized at 1,000 oC, no luminescence spectrum is observed. A weak visible luminescence is detected for the ZnO crystals prepared at 1,100 oC. Ultraviolet and visible luminescence peaks with strong intensities are observed in the luminescence spectrum of the ZnO crystals formed at 1,200 oC.

Silica is used in shell materials to minimize oxidation and aggregation of nanoparticles. Particularly, porous silica has gained attention because of its performance in adsorption, catalysis, and medical applications. In this study, to investigate the effect of the density of the silica coating layer on the color of the pigment, we arbitrarily change the structure of a silica layer using an etchant. We use NaOH or NH4OH to etch the silica coating layer. First, we synthesize α-FeOOH for a length of 400 nm and coat it with TEOS to fabricate particles with a 50 nm coating layer. The coating thickness is then adjusted to 30–40 nm by etching the silica layer for 5 h. Four different shapes of α-FeOOH with different colors are measured using UV–vis light. From the color changes of the four different shapes of α-FeOOH features during coating or etching, the L* value is observed to increase and brighten the overall color, and the b* value increases to impart a clear yellow color to the pigment. The brightest yellow color was that coated with silica; if the sample is etched with NaOH or NH4OH, the b* value can be controlled to study the yellow colors.

The turnip sawfly, Athalia rosae is one of the main pests that damage the leaves of cabbage, radish and other cruciferous crops. The developmental biology and morphological characteristics of the immature stages of Athalia rosae were studied in the laboratory using host plant, Chinese cabbage, Brassica rapa var. glabra. A. rosae can be mass reared in laboratory throughout the year under RH 60~70%, 16L:8D and 25±1℃. This species has six larval stages in the female and five larval stages in the male. The developmental period is about 28~29 days. Ovipositional periods and larval developmental periods were 6, 9 days, respectively. The pupal period was about 14 days. Illustrations and descriptions of the various immature stages and their behaviors are provided.

The hypopharyngeal gland (HPG) of the honeybee worker produces royal jelly (RJ) and has a developmental cycle closely related to the division of labor. In this study, we investigated to compare the HPG acini diameter of differently aged worker bees with high royal jelly producing colony (HRC) or less producing colony (LRC). Additionally, we also evaluated whether the fresh weight of the head is a reliable indicator of the developmental status of HPG. The HRC showed a significantly higher RJ production about two-times as compared with those of the LRC. We measured the HG-diameters on days 1, 3, 6, 9, 12, 15. The microscopic analysis revealed that the acini size of the HRC was significantly larger than the LRC. In addition, the acini diameter of HRC was 15% longer than the LRC on the first day after emerging. It was shown that the fastest development during 3 days which is preparing for nurse the brood. The HPG acini diameters increased in both colonies in a similar fashion until day 12 and then decreased. We also compared the fresh head weight of the experimental colonies, differences were similar to the development of HPG. Therefore, high royal jelly production may have a positive correlation between HPG acini size and the fresh head weight.

Nysius Dallas, 1852, is one of the most common and widely distributed genera under the superfamily Lygaeoidae. Species under this genus are hard to identify due to similarity of the species and variability of the coloration. The Nysius species were collected with the help of aspirator and plastic vile in the perilla crop fields in RDA, Miryang, Korea. Korean species of the Nysius were identified, and three species including a newly reported species N. inconspicuus were recognized. Morphological and genetic characteristics of species were illustrated, and a key to species of Korean Nysius was provided. The DNA barcoding information of N. plebeius and N. inconspicuus were recorded.

Global climate change and increased international travel have affected the transmission of mosquito-borne diseases. In South Korea, uncommon diseases such as Dengue, chikungunya and Zika virus could be transmitted by potent mediator like Aedes albopictus. In order to cope with the risk of mosquito-borne diseases, rapid mosquito monitoring system is needed. Current mosquito monitoring procedures include installation of outdoor traps-mosquito collection-species classification-analysis of disease detection – upload of information to government research institutes – disease alert. In this process, species classification takes a lot of time, and if we reduce the time, we can cope with the disease outbreak more quickly. In this study, we developed automate species classification system target for 5 mosquito species (Culex pipiens, Cx. tritaeniorhynchus, Ae. albpictus, Ae. vexans, Anopheles spp.) disease vector live in South Korea. After modeling the morphology of each mosquito species, machine learning was carried out using DenseNet (Densely Connected Networks), one of the models of Artificial Neural Network. Using the learned model, we tested the classification of 5 species of mosquitoes and showed the accuracy from 97.35% to 99.48% at the maximum. Future research will focus on increasing the number of identifiable mosquito species and reducing the time spent on species classification. The autonomous classification of mosquito species using Deep Learning technology will contribute to the development of mosquito monitoring system and public health.

The mandible character of the Lucanidae is vary by considering of developmental difference in male individual specimen. Especially, species of Genus Cyclommatus Parry, 1862 presents strong mandibular allometry. In this research, The species group which related to Cyclommatus montanellus Möllenkamp, 1904 has been evaluated for the first time in this research with inner teeth composition and positioning to establish clear taxonomic key to each species.

Part of speech category is a basic task in the study of grammar, and has been considered to be a long-held challenge in grammatical analyses. For the part of speech category in Chinese, an overall consensus has been reached in the academic circles through long years of researches and discussions that ,with semantic criteria basically discarded earlier on, part of speech category in Chinese should be analyzed with functional criteria instead of morphological criteria which are associated with entanglement. While this application of functional criteria seems to solve the difficult problems with the part of speech category in Chinese, it is still open to question whether this application should be viewed as a logical and reasonable approach. Most words in all the languages have the possibility of syntactic combinations, but it is an undeniable fact that there are definitely certain words used in the pragmatic expressions which are rarely subjected to syntactic restrictions. When these words with pragmatic functions are analyzed by the criteria of syntactic functions, they can have no places in the existing part of speech category in Chinese. For instance, words such as “例如、如、比如” in Chinese, which represent the meaning of exemplification, do not fit into any grammatical function of part of speech category. As a new potential for the functions of these words has been presented in the studies which are associated with discourse marks in the Western linguistics circles, The word “例如” in Chinese should be regarded as a discourse mark of exemplification function, and words like “真的、说句实话” as discourse marks which represent facts. These kinds of words should not be analyzed from the perspective of traditional syntactic functions because they obviously represent pragmatic functions. Therefore, part of speech category should be first divided into two classes based on the criteria of grammatical function of words: words with syntactic functions and words with pragmatic functions. Although words with pragmatic functions are greatly outnumbered by words with syntactic functions, they have their own particular grammatical functions and thus should be exclusively studied in accordance with their pragmatic properties, independently from the existing criteria of part of speech category.

Morphological differences in multi-layered graphene flakes or graphene nanoplatelets prepared by oxidative (rGO-NP, reduced graphene oxide-nanoplatelets) and non-oxidative (GIC-NP, graphite intercalation compound-nanoplatelets) routes were investigated with various analytical methods. Both types of NPs have similar specific surface areas but very different structural differences. Therefore, this study proposes an effective and simple method to identify structural differences in graphene-like allotropes. The adsorptive potential peaks of rGO-NP attained by the density functional theory method were found to be more scattered over the basal and non-basal regions than those of GIC-NP. Raman spectra and high resolution TEM images showed more distinctive crystallographic defects in the rGO-NP than in the GIC-NP. Because the R-ratio values of the edge and basal plane of the sample were maintained and relatively similar in the rGO-NP (0.944 for edge & 1.026 for basal), the discrepancy between those values in the GIC-NP were found to be much greater (0.918 for edge & 0.164 for basal). The electrical conductivity results showed a remarkable gap between the rGO-NP and GIC-NP attributed to their inherent morphological and crystallographic properties.

The microstructure observation of seed surface structure is needed for protocols of breaking dormancy of seeds with physical dormancy. The seeds of Rubus species are surrounded by a thick, hard endocarp; together, the seed and endocarp make up the stone. We evaluate stone characteristics of 18 species of Rubus through optical microscopic observation, and correlate different stone characteristics with endocarp thickness. As a result of stone size comparison, Rubus species were classified as big stones group including R. parvifolius and R. idaeus, small stones group including R. longisepalus var. longisepalus, R. corchorifolius and R. hirsutus, and middle stones group including rest of the species. The result of this study revealed that stone size and the endocarp thickness in Rubus species was various characteristics in each species. Furthermore stone size and stone weight were also well correlated endocarp thickness and result indicated that heavy stones had harder endocarp than lighter one. Thus from the result of this study it can be presumed that only one stone characteristic approach may be sufficient to estimate other characteristics in Rubus.

곤충 머리에 있는 subgena (아랫뺨)와 clypeus (두순)는 연속된 피부판으로 통칭하여 peristome (입둘레판)으로 일컫는다. 따라서 subgenal sulcus (아랫뺨선)는 peristomal sulcus (입둘레홈) 또는 cranial-stomal sulcus (두개-입선)로 개정한다. 집파리류 성충 머리에 있는 ptilinal suture (이마주머니선)는 ptilinal fissure (얼굴주름)로 개정한다. 가슴에 있는 wing process (날개돌기)는 등판에 있는 것은 notal process (등판돌 기), 옆판에 있는 것은 pleural process (옆판돌기)로 각각 개정한다. 곤충 몸 아래쪽을 지칭하는 영역을 복부는 ventum (배판), 가슴은 sternum (가 슴판)으로 각각 지칭한다.

본 실험은 풀무치의 군집형 대발생 대비 예찰매뉴얼 개발을 위하여 형태적 특징, 발생생태, 먹이선호도, 산란조건 시험을 수행하였다. 전남 무안지역에 자연발생한 풀무치 274마리의 성비는 암컷과 수컷이 18.2 : 81.8로 수컷비율이 높았고, 녹색형이 60.9%, 갈색형이 39.1%로 녹색형 이 많았다. 몸길이와 체중이 암컷은 6.5 cm, 2.8 g이고, 수컷은 5.0 cm, 1.5 g으로 암컷이 컸으며, 색깔에 따른 몸 크기는 차이가 없었다. 야외에 서 풀무치의 산란활동은 8월 하순부터 10월 하순까지 관찰되었는데, 9월 하순부터 10월 상순에 산란한 알은 이듬해 5월 하순에 부화하였다. 성충 의 일일 섭식량은 암컷 3.5 g, 수컷 1.6 g 이었다. 풀무치의 먹이선호도는 옥수수 > 조 > 기장 > 억새 > 벼 순이었으며, 억새와 벼는 좋아하지 않 았다. 풀무치가 산란을 가장 선호하는 토양은 순수 모래였으며, 산란유도 후 토양 수분함량이 높을수록 누적부화량이 많았다.

The relationship of in vitro starch digestibility and gel strength was investigated at various concentrations (10-30%) of rice cultivars with different amylose contents (27.9, 17.9, and 5.2%). As the rice flour concentration increased, predicted glycemic index decreased, but gel strength increased regardless of amylose contents. Gel strength correlated strongly with amylose content, whereas in vitro starch digestibility was more highly affected by rice flour concentration than by amylose contents. Moreover, the impact of degree of gelatinization on in vitro starch digestibility of high amylose rice was also examined in terms of structural features and rheological properties. The digestion rate of fully gelatinized flour was 1.7 times higher than that of native flour, while the disrupted structure with a different gelatinization degree during starch digestion was visually demonstrated through the X-ray diffraction and molecular distribution analysis. The rice flour changed from an A-type to a V-type pattern and showed difference in crystalline melting. The low molecular weight distribution increased with increasing degree of gelatinization during starch digestion. The apparent viscosity also increased with degree of gelatinization. These results demonstrated that the starch digestibility of rice was more affected by concentration than by amylose content, as well as by the degree of gelatinization due to structural difference.