This study investigated the effect of the grinding media of a ball mill under various conditions on the raw material of copper powder during the milling process with a simulation of the discrete element method. Using the simulation of the three-dimensional motion of the grinding media in the stirred ball mill, we researched the grinding mechanism to calculate the force, kinetic energy, and medium velocity of the grinding media. The grinding behavior of the copper powder was investigated by scanning electron microscopy. We found that the particle size increased with an increasing rotation speed and milling time, and the particle morphology of the copper powder became more of a plate type. Nevertheless, the particle morphology slightly depended on the different grinding media of the ball mill. Moreover, the simulation results showed that rotation speed and ball size increased with the force and energy.
계면중합법은 혼합되지 않은 두 용액에 용해되어 있는 반응성 단량체들이 계면에서 중합되는 기술로 다양한 분야 에 응용되고 있다. 이 중, 수처리 분리막의 경우 m-phenylene diamine과 Trimesoyl chloride를 반응물로 사용하고 있다. 분리 막의 성능은 다양한 중합 성능에 의해 영향을 받고 있으며, 본 연구에서는 유기 용액의 퍼짐 속도가 어떻게 분리막 표면 및 구조에 영향을 주는지를 주사전자현미경을 통해 고찰하였다. 퍼짐 속도는 7.6과 25 mm/sec로 조절하였으며, 유기상 용액은 1~3방울까지 조절하였다. 관찰된 결과는 퍼짐 속도가 7.6 mm/sec에서는 한 방울 떨어트릴 경우, 25 mm/sec에서는 두 방울 떨어트릴 경우 폴리아마이드 막에 균열을 발견할 수 없었다. 반면 나머지 경우에 모두 균열이 발생하였다. 따라서, 초기 유기 용액의 퍼짐 속도는 폴리아마이드 분리막의 성능에 영향을 줄 것으로 관찰되었다.
Ionic liquid (IL), asymmetric chemical consist of bulky cations and tiny-mobile anions, has been known as promising DNA extraction, separation and preservation agent due to its strong interaction with DNA. However, the interaction underlying DNA-IL complex forming mechanism remains to be elucidated. Herein, we employed three types of ILs (EMIM-Cl, BMIM-Cl, and OMIM-Cl) to investigate the changes of DNA morphology upon the alkyl chain length of ILs by using solid-state nanopore technology combining with atomic force microscopy (AFM). The results of AFM show the different forms of DNA, including aggregate, stretching, and bundling shapes in terms of EMIM-Cl, BMIM-Cl, and OMIM-Cl, respectively, assuming that the shape of DNA-IL complexes is responding to the alkyl chain length of ILs. In DNA translocation experiment. From the alteration of blockade current signals during the DNA pass through the nanopore, we estimate that the shapes of DNA are changed due to the treatment with BMIM-Cl, and OMIM-Cl, which not only increased the blockade current signals about 2-4 times in the case of OMIM, but also decrease the event showing translocation of DNA folding, implying that the alkyl chain affect to DNA stretching and bundling. The results indicate the length of hydrophobic alkyl group of IL plays an important role in determination of DNA morphology, providing their further application in nanopore technique for slowing DNA translocation speed toward discovering protein-DNA interaction or DNA sequencing.
Ionic liquids (ILs) are organic salts with low melting point by asymmetric ionic strength between cation and anion. They have been known as promising DNA extraction, separation and preservation agent due to their hydrophilic, hydrophobic interaction with DNA. However, few studies have been performed about how DNA-ILs complexes form and their mechanism. Herein, we present three types of ionic liquids (EMIM-Cl, BMIM-Cl, and OMIM-Cl) change the DNA structure depend on alkyl chain length of ionic liquids. Structural changes of DNA by ionic liquids are observed by Atomic force microscopy, gel electrophoresis, zeta potential and solid-state nanopore technology. The results of AFM show the different structures of DNA, including aggregate, stretching, and bundling shapes in terms of EMIM-Cl, BMIM-Cl, and OMIM-Cl respectively. In DNA translocation experiment, DNA/EMIM-Cl show rare translocation signal due to aggregated structure by neutralized surface charge. DNA/BMIM-Cl and DNA/OMIM-Cl show slowing down the translocation speed due to changes of DNA net charge and structure. Especially, OMIM-Cl make slowing down the DNA translocation speed about 102~104 times compared to translocation speed of bare DNA by unzipping the bundling shape of complex. In conclusion, the morphology of DNA could be modified by the incorporation with different alkyl chain length of ILs, providing their further application in nanopore technique for slowing DNA sequencing or understanding protein-DNA interaction.
Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.
The electrical properties and surface morphology changes of a silicon wafer as a function of the HF concentration as the wafer is etched were studied. The HF concentrations were 28, 30, 32, 34, and 36 wt%. The surface morphology changes of the silicon wafer were measured by an SEM (80˚ tilted at ×200) and the resistivity was measured by assessing the surface resistance using a four-point probe method. The etching rate increased as the HF concentration increased. The maximum etching rate 27.31 μm/min was achieved at an HF concentration of 36 wt%. A concave wave formed on the wafer after the wet etching process. The size of the wave was largest and the resistivity reached 7.54 ohm·cm at an 30 wt% of HF concentration. At an HF concentration of 30 wt%, therefore, a silicon wafer should have good joining strength with a metal backing as well as good electrical properties.
Kenaf fibers, cellulose-based natural fibers, were used as precursor for preparing kenafbased carbon fibers. The effects of carbonization temperature (700℃ to 1100℃) and chemical pre-treatment (NaOH and NH4Cl) at various concentrations on the thermal change, chemical composition and fiber morphology of kenaf-based carbon fibers were investigated. Remarkable weight loss and longitudinal shrinkage were found to occur during the thermal conversion from kenaf precursor to kenaf-based carbon fiber, depending on the carbonization temperature. It was noted that the alkali pre-treatment of kenaf with NaOH played a role in reducing the weight loss and the longitudinal shrinkage and also in increasing the carbon content of kenaf-based carbon fibers. The number and size of the cells and the fiber diameter were reduced with increasing carbonization temperature. Morphological observations implied that the micrometer-sized cells were combined or fused and then re-organized with the neighboring cells during the carbonization process. By the pre-treatment of kenaf with 10 and 15 wt% NaOH solutions and the subsequent carbonization process, the inner cells completely disappeared through the transverse direction of the kenaf fiber, resulting in the fiber densification. It was noticeable that the alkali pre-treatment of the kenaf fibers prior to carbonization contributed to the forming of kenaf-based carbon fibers.
Nanosized WC and WC-Co powders were synthesised by chemical vapor condensation(CVC) process using the pyrolysis of tungsten hexacarbonyl(W(CO)) and cobalt octacarbonyl(Co(CO)). The microstructural changes and phase evolution of the CVC powders during post heat-treatment were studied using the XRD, FE-SEM, TEM, and ICP-MS. CVC powders were consisted of the loosely agglomerated sub-stoichimetric WC and the long-chain Co nanopowders. The sub-stochiometric CVC WC and WC-Co powders were carburized using the mixture gas of CH-H in the temperature range of 730-85. Carbon content of CVC powder controlled by the gas phase carburization at 85 was well matched with the theoretical carbon sioichiometry of WC, 6.13 wt%. During the gas phase carburization, the particle size of WC increased from 20 nm to 40 nm and the long chain structure of Co powders disappeared.
공릉2보는 농업용수의 공급을 위하여 1970년대에 설치되었다. 그러나 인근 지역의 토지 이용의 변화로 용도를 다하여 사용되지 않고 방치되어 있었다. 공릉2보는 높이 1.5 m의 소형 보 이며, 공릉천의 하상재료는 가는 모래에서 가는 자갈로 구성되어있다. 지자체와 지역 주민들과의 협의를 통하여 공릉2보는 2006년 4월 14일 완전히 철거되었다. 본 논문에서는 공릉2보 철거에 따른 하천형태학적인 변화를 조사하기 위한 연구를 수행하였다. 보 철거 전 후의
황강 상류에 위치한 합천댐은 1988년 12월에 완공되었다. 완공 이후 댐의 저수량 부족으로 10여년간 수문을 통한 방류가 없었기 때문에, 댐 하류부에 새로운 생태계가 조성되었다. 이러한 현상은 국내 다른 지역에서 찾아보기 힘든 매우 특이한 사항이다. 본 연구에서는 댐 건설로 인한 유황변화에 따른 하천의 지형학적 변화와 식생 피복상태의 변화에 대한 분석을 수행하였다. 이를 위해 하상고 및 하천수로단면의 변화를 조사하였다. 또한 나이테 분석을 포함한 현지