검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 27

        1.
        2024.10 구독 인증기관·개인회원 무료
        도로 포장 기술이 발달함에 따라 내구성 확보 등의 구조성능 중심에서 이용자의 승차감 및 소음 저감 등의 기능성 중심으로 변화하 고 있다. 최근 도로 소음에 대한 민원이 증가하고 있고 도로 소음으로 인한 피해를 보상하라는 판결 사례도 증가하고 있다. 이러한 문 제를 해결하기 위해 차량 소음 저감 효과가 우수한 저소음 포장을 적용하고 있다. 본 연구에서는 저소음 배수성 포장과 저소음 비배 수성 포장의 내구성 및 공용성을 평가하였으며, 기대수명 예측을 위해 국내에 있는 배수성 8종, 비배수성 3종의 제품을 이용하여 실내 성능 평가를 수행하였다. 국토교통부의 "아스팔트 콘크리트 포장 시공 지침(2021)"의 배수성 포장 품질기준 및 비배수성 혼합물에 대 한 품질기준에 따라 시험을 진행하였다. 아스팔트 혼합물의 생산, 저장, 운반 및 포설 시 아스팔트의 흘러내리는 양이 적합한지를 평 가하기 위해 드레인다운 시험을 진행하였고, 배수성 혼합물의 골재 비산 저항성을 평가하기 위해 칸타브로 손실률 시험을 진행하였다. 또한 포장의 수분 저항성을 평가하기 위해 인장강도비(TSR) 시험과 소성변형 저항성을 평가하기 위해 동적안정도 시험을 진행하였다. 이후, 배수성 포장의 투수 성능을 평가하기 위한 실내투수계수 시험을 진행하였고, 저소음 포장의 소음 저감 성능을 평가하기 위해 임 피던스 관을 이용한 흡음률 시험을 진행하였다. 시험 결과 모든 종류의 혼합물이 품질기준을 통과하여 충분한 기초 성능을 가지고 있 는 것으로 나타났고, 흡음률 시험의 경우 배수성 혼합물이 평균 0.779, 비배수성 혼합물이 평균 0.638의 흡음계수를 나타내었다. 배수 성 혼합물과 비배수성 혼합물의 평균 공극률은 각각 19.3%, 3.2%로 배수성 혼합물이 비배수성 혼합물에 비해 많은 공극률을 가지고 있어 소음 저감 성능이 비배수성에 비해 우수한 것으로 판단하였다.
        2.
        2024.10 구독 인증기관·개인회원 무료
        한국 고속도로 포장은 1970년 경부고속도로 건설을 시작으로 많은 발전을 이루었으며, 최근 도로이용자에게 쾌적한 도로를 제공할 수 있는 배수성 아스팔트 포장에 대한 관심이 높아지고 있다. 본 연구에서는 한국 고속도로 배수성 아스팔트 구간에 대한 시공목적별, 신설과 유지보수 등을 구분하여 배수성 아스팔트 포장 적용현황을 분석하였다. 또한, 적용된 배수성 아스팔트 포장의 교통량을 조사 분석하였으며, 효율적인 교통량 그룹 선정 방법을 제시하였다. 고속도로에 적용된 배수성 아스팔트 포장의 전주기 평가를 위해 평가항 목을 제시하였다. 내구성평가 항목으로는 포장상태평가지수와 표면조도를 선정하였다. 기능성 평가 항목으로는 내부 공극 막힘여부를 확인할 수 있는 현장투수, 미끄럼저항지수, 포장노면과 타이어에서 발생하는 도로소음원 평가를 위한 도로소음을 선정하였다. 그리고 조사 항목들에 대한 배수성 아스팔트 포장의 전주기 평가를 통해 각각 조사 항목에 대한 정량적 분석평가를 수행하여 도로소음도 예 측식을 제안하였다.
        8.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study aims to reduce the urban heat island phenomenon via utilization of porous asphalt pavements. METHODS : One of the many known functions of porous asphalt is that it reduces the urban heat island phenomenon. Indoor experiments were conducted to compare the surface temperature of sprinkled dense-graded and porous asphalt and outdoor experiments were conducted to verify the difference between the two asphalt pavements under external conditions. RESULTS : The results of the indoor experiment demonstrated that the temperatures of the two pavements were similar and that the porous asphalt pavement exhibited low temperature when sprinkled; the temperature of the porous asphalt was approximately 2 °C lower than that of the dense-graded asphalt pavement. The results of the outdoor experiment showed that the peak temperatures of the two pavements were approximately the same as usual. However, it was confirmed that the surface temperature of the porous asphalt pavement at night after sunset was lower than that of the dense-graded asphalt pavement and that the peak temperature dropped for approximately 1~2 days after the rainfall.. CONCLUSIONS : Porous asphalt pavement has a lower surface temperature than normal dense-graded asphalt pavement, under the presence of moisture in the pavement. In addition, it was confirmed that the lower surface temperature of the porous asphalt pavement is due to the low heat emission of the pavement at night. Accordingly, it is believed that the application of the porous asphalt pavement will not only have known effects but also significant impacts on the reduction of urban heat island phenomena.
        4,000원
        9.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The objective of this study is to address various problems, such as an increase in material cost and premature failure (e.g., cracks and potholes) of porous pavements, and to develop multifunctional asphalt and asphalt mixtures to ensure the long-term commonality of porous asphalt pavements. METHODS : A basic quality test of two types of porous asphalt mixtures was performed. One type consisted of the existing porous asphalt mixture, using domestically presented grading, and the other a porous asphalt mixture using high-viscosity modified asphalt with enhanced low-temperature properties, aimed at improving strain resistance and developed by applying the grading suggested by the Federal Highway Administration (FHWA). RESULTS : The cantabros loss rate was 19.62 % for conventional modified asphalt (PG 82-22) and 5.95 % for the developed highviscosity modified asphalt (PG 88-28), indicating that both mixtures passed the criteria. Regarding the drain-down loss rate, mixtures using both types of asphalt were found to pass all quality standards. The average permeability coefficients for each porous asphalt mixture were 0.023 and 0.018 and both types of porous asphalt mixtures satisfied the quality standard of 0.01 cm/s, as given by the Asphalt Concrete Pavement Guidelines of the Ministry of Land, Infrastructure, and Transport. CONCLUSIONS : As a result of the mix design of the two porous asphalt mixtures, the mixture developed in this study was found to be superior to the conventional porous asphalt mixture using conventional porous asphalt grading and modified asphalt.
        4,000원
        10.
        2018.05 구독 인증기관·개인회원 무료
        With interconnecting voids, porous asphalt provides drainage of rainwater in vertical and lateral direction during rainfall. In addtition, it also offers remarkable advantages compare to traditional asphalt: reduce vehicle splash and spray behind, reduce night time surface glare in wet season and increase tire-pavement friction...On the other hand, the following aspects are recognized as disavantages: reduced performance, winter maintenance issues and high construction cost. For flexible pavement, dynamic modulus master curve is an important parameter in the mechanistic-empirical pavement design guide. In this study, the results of experiment of dynamic modulus test of porous asphalt are discussed for understanding well about the viscoelastic characteristics of porous asphalt.
        11.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        OBJECTIVES : The objective of this research is to determine the moisture resistance of the freeze-thaw process occurring in low-noise porous pavement using either hydrated-lime or anti-freezing agent. Various additives were applied to low-noise porous asphalt, which is actively paved in South Korea, to overcome its disadvantages. Moreover, the optimum contents of hydrated-lime and anti-freezing agent and behavior properties of low-noise porous asphalt layer are determined using dynamic moduli via the freeze-thaw test. METHODS: The low-noise porous asphalt mixtures were made using gyratory compacters to investigate its properties with either hydratedlime or anti-freezing agent. To determine the dynamic moduli of each mixture, impact resonance test was conducted. The applied standard for the freeze-thaw test of asphalt mixture is ASTM D 6857. The freeze-thaw and impact resonance tests were performed twice at each stage. The behavior properties were defined using finite element method, which was performed using the dynamic modulus data obtained from the freezethaw test and resonance frequencies obtained from non-destructive impact test. RESULTS: The results show that the coherence and strength of the low-noise porous asphalt mixture decreased continuously with the increase in the temperature of the mixture. The dynamic modulus of the normal low-noise porous asphalt mixture dramatically decreased after one cycle of freezing and thawing stages, which is more than that of other mixtures containing additives. The damage rate was higher when the freeze-thaw test was repeated. CONCLUSIONS : From the root mean squared error (RMSE) and mean percentage error (MPE) analyses, the addition rates of 1.5% hydrated-lime and 0.5% anti-freezing agent resulted in the strongest mixture having the highest moisture resistance compared to other specimens with each additive in 1 cycle freeze-thaw test. Moreover, the freeze-thaw resistance significantly improved when a hydrated-lime content of 0.5% was applied for the two cycles of the freeze-thaw test. Hence, the optimum contents of both hydrated-lime and anti-freezing agent are 0.5%.
        4,000원
        12.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : In this study, noise reduction effect of a two-layer porous asphalt pavement was investigated through site measurement and computer simulation. METHODS: To examine noise reduction effect, a 3 km long quiet pavement was installed by removing previous normal pavement, which had a rather low porosity. The studied site was a high-rise apartment building surrounded by the quiet pavement and Seoul ring road with heavy traffic volume, indicating relatively high background noise. RESULTS: The measurement result before and after installing the quiet pavement showed a noise reduction effect of 4.3 dB(A) at a distance of 7.5 m from the road. After validating the accuracy of simulation using SoundPLAN, the reduction in SPL(sound pressure level) at the facades by the quiet pavement was predicted by considering five different road conditions generating traffic noise from each road or in the combination of the quiet pavement and Seoul ring road. In the case of no noise from Seoul ring road, noise reduction at the facades was 4.2 dB(A) on average for 702 housing units. With background noise from Seoul ring road, however, the average SPL decreased to 2.0 dB(A). Regarding subjective response of noise, the number of housing units with a noise reduction of over 3 dB(A) was 229 out of 706 units (approximately 32%). For 77 housing units, the noise reduction was between 1~3 dB(A), while it was less than 1 dB(A) for 400 housing units. CONCLUSIONS: The overall result indicates that the quiet pavement is useful to reduce noise evenly at low and high floors compared to noise barriers, especially in the urban situation where background noise is low.
        4,000원
        13.
        2015.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: It is theoretically well known all over the world, that porous hot mixed asphalt (HMA) with hydrated Lime improves moisture and rutting resistance, and reduces pothole occurrence frequency, as well as the life cycle cost (LCC). METHODS : Addictive in the two different formations of the liquid anti-stripping Agent and powder Hydrated-Lime was applied in this investigation in order to obtain relatively clear results according to their types and conditions. Firstly, the moisture conditions were set, and applied to the porous HMA mixtures with hydrated lime (anti-stripping agent). Next, it was followed by a non-destructive test with the application of three freeze-thaw cycles, which were individually carried out thrice to compare the results of the dynamic moduli. Lastly, the hydrated lime effect related to moisture sensibility to porous HMA has been verified through the analysis of the modulus results regarding the change rate of dynamic modulus per n-cycle. RESULTS: It is clear from this investigation, that the dynamic modulus is inversely proportional to the change in temperature, as the graph representing the rigidity of the thermorheologically simple (TRS) material showed gradual decline of the dynamic modulus with the increase in temperature. CONCLUSIONS: The porous HMA mixture with the anti-stripping agent (hydrated Lime) has been found to be more moisture resistant to freezing and thawing than the normal porous HMA mixture. It is clear that the hydrated lime helps the HMA mixture to improve its fatigue resistance.
        4,200원
        14.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study is to construct the regression models of drainage asphalt concrete specimens and to provide the appropriate coefficients of hydraulic conductivity prediction models. METHODS: In terms of easy calculation of the hydraulic conductivity from porosity of asphalt concrete pavement, the estimation model of hydraulic conductivity was proposed using regression analysis. 10 specimens of drainage asphalt concrete pavement were made for measurement of the hydraulic conductivity. Hydraulic conductivity model proposed in this study was calculated by empirical model based on porosity and the grain size. In this study, it shows the compared results from permeability measured test and empirical equation, and the suitability of proposed model, using regression analysis. RESULTS: As the result of the regression analysis, the hydraulic conductivity calculated from the proposal model was similar to that resulted from permeability measured test. Also result of RMSE (Root Mean Square Error) analysis, a proposed regression model is resulted in more accurate model. CONCLUSIONS: The proposed model can be used in case of estimating the hydraulic conductivity at drainage asphalt concrete pavements in fields.
        4,000원
        18.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 배수성 아스팔트 포장에 사용하기 위하여 국내에서 개발한 개질 아스팔트 바인더 및 혼합물의 실내 및 현장 공용성을 평가한 연구이다. 국내에서 개발된 개질 아스팔트 2종에 대한 DSR, BBR 및 다양한 바인더 시험을 실시하여 공용성능이 상대적으로 우수한 1종의 개질 아스팔트를 선정하였다. 선정된 개질 아스팔트와 기존에 일본에서 사용되는 개질 아스팔트를 사용하여 각각에 대하여 배합설계를 실시하고, 배수성 아스팔트 혼합물을 생산하여 실내 공용성을 비교하기 위해 휠트래킹 시험, 수분손상 시험, 피로시험 등을 수행하였다. 그 결과, 공용특성 측면에서 국산의 개질 아스팔트가 일본 개질 아스팔트와 비슷하거나 경우에 따라서는 우수함을 확인하였다. 실내시험결과를 바탕으로 현장 시험시공을 실시하였고, 추적조사를 통하여 시간에 따른 공극률과 소음특성의 변화를 측정하였다. 그 결과 시공 초기에는 배수 및 소음 저감 능력이 우수하였으나 2년이 경과한 후 소음 저감 능력이 감소하여 SMA 포장과 비슷한 수준의 소음저감효과를 나타내었다.
        4,000원
        1 2