This study examined the methods used in household doenjang (Korean soybean paste) production. Nine hundred fortythree responses were obtained using a nationwide, questionnaire-based survey (2018-2019) with non-probabilistic snowballing sampling. Consistent with previous studies, the respondents were primarily over the age of 50 years (97.1%) and female (97.9%). In addition to soybeans, the most used ingredients were red pepper (85.8%) and charcoal (85.5%), which most respondents obtained through direct farming (50.4-59.9%). Seasonal production occurred later in the higher latitude regions (Gyeonggi-do, Gangwon-do, Chungcheong-do) (p < 0.01), which have lower average temperatures, and the fermentation period was shorter in the lower latitude regions (Jeolla-do, Gyeongsang-do, Jeju-do) (p < 0.01), which have higher average temperatures. There were no significant regional differences in the season when doenjang was made, with most production occurring during January and February (81.1%). Most respondents (71.3%) made doenjang using homemade meju (soybean block used as a starter) in a traditional way to allow the microorganisms to be naturally inoculated. These results could be used as a basis for future research on topics such as starter development, standardized production, and safety of household doenjang.

고추는 조미채소의 한 종류로 우리나라 채소시장에서 큰 비중을 차지하는 품목이다. 대부분 고추의 이용은 건고추의 분말형태인 고춧가루로 가공하여 이용되고 있으므로, 고추건조에 대한 품질과 생산성 향상이 중요한 부분이다. 따라서 본 연구에서는 고추의 건조방법에 따라 고춧가루의 품질을 좌우할 수 있는 성분의 변화에 대하여 비교하고, 생산비를 고려하여 적정 건조방법을 제시하고자 실험을 수행하였다. 건조방법으로는 관행으로 많이 이용되는 양건과 화건을 이용하였으며, 제습기를 이용한 제습건조방식을 추가 적용하여 건고추 생산성과 품질을 비교하였다. 고추의 건조방식에 따른 건조율은 화건이 85.1%로 제일 높았고, 이에 따라 고춧가루의 수분함량도 13.5%로 가장 낮게 나타났다. 고추의 색택을 좌우하는 ASTA(American Spice Trade Association) 색도는 양건처리에 비해 화건과 제습건조처리가 높은 결과를 보였다. 고춧가루의 신미성분인 capsaicinoid 함량은 양건처리에 비하여 화건과 제습건조처리에서 모두 낮게 나타나 이에 대한 추가적인 적정 건조조건에 대한 연구가 추가되어야 된다. 당함량은 건조시간이 비교적 짧았던 화건과 제습건조처리에서 양건에 비해 높게 나타났으나 두 처리간에는 유의한 차이를 보이지 않았다. 건고추 생산비용은 제습건조처리가 화건처리에 비해 9.9% 효율이 높은 것으로 나타났다. 본 연구를 통해 화건과 제습건조가 당함량의 증진과 건고추의 색 발현 측면에서는 효과적이었음을 알 수 있었다. 고추의 신미성분인 capsaicinoid함량 증진을 위해서는 화건과 제습건조처리에서 적정한 건조온도와 건조시간에 대한 연구가 추가되어야 될 것으로 판단되었다.

This experiment was conducted at Suwon, Korea from 2013 to 2015. The objective of this study was to establish the optimum seeding rate, and to clarify the nitrogen fertilizer level for rye seed production in central and north area of Korea. We used Korean rye cultivar ‘Gogu’ for this test. We employed a split-plot design with three replications. The main plots were designed by three seeding levels (3, 5 and 7 kg 10a-1), but other sub-plots were randomly seeded. The plots were treated with three different nitrogen fertilizer levels (3, 6 and 9 kg 10a-1). The percentage of productive tiller, number of grain per spike, fertility rate, 1 liter weight, and 1000-grain weight decreased as seeding rate increased from 3 kg 10a-1 to 7 kg 10a-1, whereas the number of spike per ㎡ increased. Therefore the grain yields of rye had less of an effect by increasing seeding rate. There was an increase in number of spike per ㎡, number of grain per spike, and fertility rate as nitrogen fertilizer level increased from 3 kg 10a-1 to 9 kg 10a-1, but grain yields significantly not affected by the interaction of seeding rate × nitrogen fertilizer levels. However, the best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and 5∼6 kg 10a-1, respectively, considering seed and fertilizer reduction and the prevention of pollution by excess fertilization.

본 연구에서는 농법별 주요 엽채류의 생산단계에서 부터 수확된 농산물의 모의유통과 세척단계까지 동일 개체를 대상으로 미생물상의 변화를 비교하여 단계별 미생물적 안전성 관리방안을 수립하고 개선방안을 도출하고자 수행하였다. 생산 및 유통중 위생지표균 및 식중독 균의 검출량을 조사한 결과 호기성 세균을 제외한 조사대상 미 생물은 발병량 이하로 안전한 수준이었다. 생산단계에서 검출되지 않거나 낮은 수준이었던 위생지표균 및 식중독 균의 검출량은 엽채류의 종류, 재배방법에 관계없이 생산 단계보다 모의유통 중 증가하였으나, 세척단계에서 다시 감소하는 경향을 나타내었다. 생산과정에서 검출되지 않았던 미생물이 모의유통중 검출된 것은 수확후 처리과정 중 교차오염으로 예상되며, 생산단계에서 낮은 수준으로 검출되었던 미생물의 증가는 유통과정 중 증식한 결과로 판단된다. 따라서 유통단계에서는 저온유통시스템의 확대 적용과 운반도구 등에 대한 위생관리 수준을 향상시키기 위한 노력이 필요하다.

This study was conducted with two ruminally cannulated Holstein steers to examine the effect of micronized and steam flaked corn on ruminal fermentation characteristics. The in situ dry matter degradability after 48 h incubation was the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corn treatments. The steam flacked corn (3.3 mm thickness) was degraded lower (P<0.05) than the 2.9 and 3.1 mm thickness of steam flacked corn. Effective dry matter degradability and the rate of constant were the highest (P<0.05) at micronized corn (2.5 mm thickness) compared with steam flaked corns as well. The in vitro dry matter degradability after 48 h incubation was tended to higher (P=0.088) at micronized corn (2.5 mm thickness) than steam flaked corns, whereas there is no significantly difference between steam flaked corn treatments. Total volatile fatty acid concentration was higher at steam flaked corn (2.9 mm thickness) than micronized corn (2.5 mm thickness) and steam flaked corn (3.1 and 3.3 mm thickness). The acetate : propionate ratio was the highest (P=0.008) at steam flaked corn (2.9 mm thickness) and the lowest (P=0.008) at micronized corn (2.5 mm thickness). Total gas and methane production after 48h ruminal incubation was the highest (P=0.001) at micronized corn (2.5 mm thickness) compared with steam flaked corns. According to these results, the thickness of steam flaked corn as resulted corn processing is believed to do not affect methane production. However, further study is needed to better understand the present results to verify the correlation between corn processing method and their thickness on methane production using the same thickness corns by difference processing methods.

In order to produce mushroom compost in low-cost and high-efficiency, a self-propelled turner was developed and compared with the uniformity of compost produced by excavator, compost mixer, and self-propelled turner. The material of the compost was mixed with rice straw and chicken manure at a ratio of 3:1 as dry weight. After the final turning, the internal temperature distribution, the water content of the compost pile, the ash ratio and uniformity of the compost pile were examined. After compost was completed, the water contents were 69.9 ± 0.54, 72.1 ± 0.15 and 74.5 ± 0.82%, respectively. The length of rice straw was 47.5 ± 15.4 cm, 24.9 ± 10.1 cm and 31.0 ± 10.6 cm, respectively. The ash content of the dry weight of each compost were 25.0 ± 6.2%, 33.6 ± 4.2% and 28.2 ± 1.1%, respectively. The deviation of the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 9 m/sec for the self-propelled turner and 21.5 m/sec for the compost mixer. As a result, the mushroom compost was the most uniformly produced by the self-propelled turner.

이 논문은 북한강유역에 분포하는 공방에서의 석기 생산방식을 살펴보기 위해 작성한 글이다. 공방의 물질적 지표로는 공방 내에 남겨진 내부시설과 생산흔적을 비롯해 돌감과 부산물, 제작도구, 각종 (미)완 성 석기류, 실패품, 토기류 등의 출토유물들이 있다. 지표분석을 통해 공방은 석기 생산을 주목적으로 한 별도의 생산 전용공간이며, 내부에서는 타격과 고타, 마연기술을 이용해「정형(1단계)-세부표현(2단계)-마무리(3단계)」의 보편적인 생산과정이 이루어졌음을 확인할 수 있었다. 한편, 분석과정에서 드러난 생산방식상의 특징과 공방의 성격은 다음과 같다. 첫째, 분기별로 공방에서 생산된 석기의 종류와 점유율 변화는 기본적으로 해당 시기의 수요 충족에 있다고 판단된다. 하지만 미완성 석기에 비해 완성석기의 점유율 격차가 큰 석부류는 생산과정에서 초래될 수 있는 실패율에 의한 것으로 추정되며, 현재까지 특정 기종만을 생산하거나 생산과정 중 일부 기법(술) 이나 과정만을 담당한 특수한 공방의 존재는 확인되지 않았다. 둘째, 공방에서 생산된 석기류 중에는 재사용 또는 재활용된 석기류가 많고, 완성 석기의 점유율이 상대적으로 높은 편에 속하는 석부류는 생산에 실패한 개체들이 많다. 공방 내에서 생산된 석기의 교환(역)의 가능성을 배제할 수는 없지만 교환(역)이 일정한 수준 이상의 생산기술과 생산량 확보를 전제한다는 점에서 자체수요를 주목적으로 석기를 생산했을 가능성이 높다고 판단된다. 셋째, 공방은 파손된 도구를 보수해 재사용(reuse)하고 생산과정에서 발생하는 실패품과 폐기된 토기류 등을 재가공해 다른 용도의 도구로 재활용(recycling)하는 장소로 활용되었다. 이와 같은 방식은 자원의 희소성을 극복하면서도 생산에 투입된 노동력과 시간을 절감하기 위한 효율적인 생산방식이다. 종합하면 북한강유역에 분포하는 공방은 공방이 속한 주거군집과 취락단위의 수요를 주목적으로 운영되었으며 새로운 석기의 생산과 더불어 보수와 재활용 등 다양한 방면으로 활용된 공간이다.

본 연구는 최근 북한강 수계에서 번성하고 있는 Anabaena strain의 16S rDNA 염기서열을 이용한 종 수준의 동정과 geosmin 합성 유전자의 탐침을 통해 이취미 물질의 잠재 생산능력을 분석하였다. 현장(경기도 양평군 조암면 삼봉리 수역)에서 분리 배양한 Anabaena는 직선형과 나선형 두 가지의 형태적 변이를 보였다. 이들은 세포의 크기와 사상체에서 형태적 차이를 나타냈으며, A. circinalis 및 A. crassa와 유사한 형태적 특징들을 보여주었다. 그러나 16S rDNA 계통수 및 유연관계를 분석한 결과, 직선형과 나선형 모두 동일한 A. circinalis 종으로 확인되었다(98%~100%의 유전적 유사도). 또한 직선형과 나선형 strain 모두에서 geosmin을 합성하는 유전자 구간이 발견되어, 북한강 수계에 존재하는 Anabaena circinalis는 종의 형태적 변이에 관계없이 geosmin을 생산할 수 있음을 보여주었다. 본 연구의 결과는 유전자 수준에서 A. circinalis의 geosmin 생산에 대한 직접적인 증거를 제공하는 국내 최초의 보고로서 북한강 수계에서 geosmin 증가의 원인종 확인 및 관리에 중요한 자료를 제공한다.

Graphene oxide powders prepared by two different drying processes, freeze drying and spray drying, were studied to compare the effect of the drying method on the physical properties of graphene oxide powder. The graphene oxide dispersion was prepared from graphite by chemical delamination with the aid of sulfuric acid and permanganic acid, and the dispersion was further washed and re-dispersed in a mixed solvent of water and isopropyl alcohol. A freeze drying method can feasibly minimize damage to the sample, but it requires a long process time. In contrast, spray drying is able to remove a solvent in a relatively short time, though this process requires exposure to a high temperature for a rapid evaporation of the solvent. The powders prepared by freeze drying and spray drying were characterized and compared by Raman spectroscopy, X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, and by an elemental analysis. The graphene oxide powders showed similar chemical compositions; however, the morphologies of the powders differed in that the graphene oxide prepared by spray drying had a winkled morphology and a higher apparent density compared to the powder prepared by freeze drying. The graphene oxide powders were reduced at 900˚C in an atmosphere of N2. The effect of the drying process on the properties of the reduced graphene oxide was examined by SEM, TEM and Raman spectroscopy.

본 연구는 돼지의 난포란을 체외성숙하여 세포질내정자주입(ICSI)에 의해 생산된 체외수 정란의 체외발달율을 평가하기 위하여 실시하였다. 세포질내정자주입에 의한 체외수정란의 발달율은 서로 다른 보존상태의 정자인 신선정자, 액상정자 및 동결-융해된 정자를 이용하 더라도 수정율과 배발달율에는 영향을 미치지 않는 것으로 나타났다. 세포질내정자주입 후 난자의 전기적 활성화를 처리한 실험군이 활성화를 처리하지 않은 실험군에 비해 수정율과 배반포기배로의 발달율에 있어서는 높은 경향을 나타내었으나, 체외수정 실험군 및 전기적 활성화를 처리한 실험군과 전기적 활성화를 처리하지 않은 실험군간 배반포기배의 할구수는 유의적인 차이를 나타내지 않았다. 또한 각각의 실험군에서 얻은 배반포기배의 염색체를 분 석한 결과, 정상 이배체 염색체상의 비율에 있어서도 유의성을 나타내지 않았다.

Recently, to improve operating efficiency with the higher in-line rate in automated production lines, a lot of cases of grouping machines and material handling system together to form a cluster has shown frequently. This article addresses the job allocation and operation method of automated material handling for cluster-type production systems. First of all, the control problems of the automated material handling systems are classified into the control problem of inter-cluster material handling system and that of intra-cluster material handling system. Then, a distributed agent-based control scheme is proposed for the former, and an operational control procedure for the latter. Simulation experiment shows that the proposed method is efficient in reducing cycle times and improving utilization of material handling vehicles.

In 450mm wafers production environment for next-generation semiconductor production, one of the most significant features is the adoption of full automation to the whole manufacturing processes involved. The full automation system applied to the whole manufacturing processes will prevent the workers from intervening the manufacturing processes as much as possible and increase the importance of each individual wafer noticeably, and thus require a more robust scheduling system for entire semiconductor manufacturing processes. The scheduling system for 450mm wafers production also should be capable of monitoring the status of each individual wafer and collecting useful fab data in real time. Based on data (or information) gathered in each process, the real-time scheduling system function efficiently to control the whole semiconductor manufacturing processes. In this study, we first carry out preliminary survey on the system requirements and the necessary functions for constructing the real time scheduling system with considering the changes from 300mm wafer production environment to 450mm wafer production environment, and then propose the scheduler system architectures for the cluster-type production processes which are the general in 450mm wafer production environment for the efficient production scheduling. The system architectures proposed in this study involve the modules for real-time scheduling, the modules for supporting the cluster-type production, the modules for finding optimal schedules, and so on. Also, we provide the specifications of the key required functions and capabilities of the modules and the relationship among the modules proposed.　

This study was carried out to determine the effects of sowing methods after herbicide application on botanical composition, forage yield and chemical contents in the pasture dominated Hypochoeris radicata in Jeju area over two years. It was arranged as a

A field experiment was carried out to determine the effects of seeding methods and rates on the growth characteristics, forage yield and nutritive value of sorghum X sudangrass hybrid (Sorghum bicolor (L.) Moench, cv. Pioneer 988) grown under application

SUMMARY I. 서 론 II. 재료 및 방법 III. 결 과 IV. 고 찰 V. 적 요 VI. 인용문헌

Ihis experiment was carried out to select a carrier as rhizobium inoculant for alfalfa. The Rhizobium inoculants were produced in main materials(organic and inorganic materials) and submaterial(Ca, and sucrose), and than the changes of Rhizobium populatio

There are growing needs to produce relatively high purity(99.0% or higher) oxygen at low cost. For small scale production, both pressure swing adsorption(PSA) and membrane process are competitive and less expensive or more convenient than well known cryogenic fractionation technology. A continuous membrane column(CMC) combined with a PSA oxygen generator can be employed to produce high purity oxygen continuously. The oxygen enriched gas generated by a PSA unit, with a concentration of 93~94%, is fed to the CMC that consism of three modules of poly(imide) hollow fibers. Several experiments were conducted by varying parameters, such as feed flow rate, transmembrane pressure drop, stage cut, and feed location in order to obtain a high oxygen concentration above 99.0%. A two-series unit mode was also employed with CMC operation to optimize the given membrane area.