Understanding the characteristics of reservoir water quality is fundamental in reservoir ecosystem management. The water quality of reservoirs is affected by various factors including hydro-morphology of reservoirs, land use/cover, and human activities in their catchments. In this study, we classified 83 major reservoirs in South Korea based on nine physicochemical factors (pH, dissolved oxygen, chemical oxygen demand, total suspended solid, total nitrogen, total phosphorus, total organic carbon, electric conductivity, and chlorophyll-a) measured for five years (2015~2019). Study reservoirs were classified into five main clusters through hierarchical cluster analysis. Each cluster reflected differences in the water quality of reservoirs as well as hydromorphological variables such as elevation, catchment area, full water level, and full storage. In particular, water quality condition was low at a low elevation with large reservoirs representing cluster I. In the comparison of eutrophication status in major reservoirs in South Korea using the Korean trophic state index, in some reservoirs including cluster IV composed of lagoons, the eutrophication was improved compared to 2004~2008. However, eutrophication status has been more impaired in most agricultural reservoirs in clusters I, III, and V than past. Therefore, more attention is needed to improve the water quality of these reservoirs.

For several decades, attribute classification methods using the asymmetrical relationship between an attribute performance and the satisfaction of that attribute have been explored by numerous researchers. In particular, the Kano model, which classifies quality attributes into 5 elements using simple questionnaire and two-dimensional evaluation table, has gained popularity: Attractive, One-dimensional, Must-be, Indifferent, and Reverse quality. As Kano's model is well accepted, many literatures have introduced categorization methods using the Kano's evaluation table at attribute level. However, they applied different terminologies and classification criteria and this causes confusion and misunderstanding. Therefore, a criterion for quality classification at attribute level is necessary. This study is aimed to suggest a new attribute classification method that sub-categorizes quality attributes using 5-point ordinal point and Kano's two-dimensional evaluation table through an extensive literature review. For this, the current study examines the intrinsic and extrinsic problems of the well-recognized Kano model that have been used for measuring customer satisfaction of products and services. For empirical study, the author conducted a comparative study between the results of Kano's model and the proposed method for an e-learning case (33 attributes). Results show that the proposed method is better in terms of ease of use and understanding of kano's results and this result will contribute to the further development of the attractive quality theory that enables to understand both the customers explicit and implicit needs.

Recently, service quality must reflect several demands of customers who show rapid and various changes so as to be compared with the past. So, objective and rapid methods for them are necessary more. For them, first of all, service company must calculate their standard of service quality accurately by measuring service quality exactly. To measure service quality accurately, this researcher collected and analyzed data by survey for customers who are customers of logistics services, grasped potential satisfaction standard(P) by 5 point Likert scale and one survey for accurate classification of quality attributes through weighted customer satisfaction coefficient changing quality attributes by developing the study on Kano model and Timko's customer satisfaction coefficient, and suggested Potential Customer Satisfaction Improvement index(PCSI) for examining the improvement of customer satisfaction so as to utilize them as an index of differentiated and concrete measurement of service quality.

To establish a new creative economy, the worldwide efforts have been made to wriggle out the old economic paradigm after the financial crisis of 2008. When it comes to the limitation of the viability. the start up companies have a high risk of failure. Therefore business incubator (BI) should carry out the role to improve their viability. As for the maximization of the effect on the business incubating services as move in companies, it is important for BI to increase the level of business incubating services by the systemic and scientific measurement. This study showed that the quality of the BI center services was measured by Kano analysis and the previous research as follows. First, BI quality attribute by Timko’s customer satisfaction came out into the attractive qualities on the 14 items that amount to the 70% of 20 business incubating services items. It is desirable to perform the strategy for the satisfaction. Secondly, basic business incubating services were interpreted as the one-dimensional quality like incubating spaces, parking facilities, security facilities, industry technology development funds, and incubating managers. Finally, training and educational service was recognized as indifferent quality. Futhermore, the improvement and the limitation of this study as well as the interpretation of analysis results are also provided.

To estimate weld quality of the resistance spot-welding, the acoustic emission features are investigated from the total acoustic emission signal at the single-spot weld. Typically, the resistance spot welding process consists of several stages: set-down of the electrodes, squeeze, current flow, forging, hold time, and lift-off. Various types of acoustic emission response corresponding to each stage can be separately analyzed by using back-propagation neural network classifier and wavelet transform technique. The presented machine learning results provide a validation for using back-propagation neural network and wavelet transform technique as a valuable insights into the resistance spot-welding process. Especially, a wavelet transform technique is demonstrated and the plots are very powerful in the recognition of the acoustic emission features

This paper analyzed the management quality activities and performance based on industrial types. We divided the business into four industrial types, manufacturing industry, service industry, medical institution and public enterprise. We analyzed the differences of the elements of management quality in industrial types. The results show that leadership, measurement, analysis and knowledge management and workforce focus categories are not significant and strategic planning, customer and market focus, process management and performance categories are significant. This paper proposes the directions of management quality activities and performance according to industrial types based on these results.

Dependent models in quality statistics are classified as serially autocorrelated model, multivariate model and dependent sample model. Dependent sample model is most efficient in time and cost to obtain samples among the above models. This paper proposes to implement parametric and nonparametric models into production system depended on demand pattern. Nonparametric models have distribution free and asymptotic distribution free techniques. Quality statistical models are classified into two categories ; the number of dependent sample and the type of data. The type of data consists of nominal, ordinal, interval and ratio data. The number of dependent sample divides into 2 samples and more than 3 samples.

In this study, we analyzed on-site monitoring data for 15 tributaries in Geumho watersheds for 3 years (2011-2013) in order to sort out priorities on water quality characteristics and improvement. As a result of estimating contribution to contamination of the tributary rivers, Dalseocheon showed the highest load densities, despite the smallest watershed area, with 22.7% BOD5, 30.7% CODMn, 31.3% TOC and 47.6% TP. After conducting PCA (principal component analysis) and FA (factor analysis) to analyze water quality characteristics of the tributary rivers, the first factor was classified as CODMn, TOC, EC, TP and BOD5, the second factor as pH, Chl-a and DO, the third factor as water temperature and TN, and the fourth factor as SS and surface flow. In addition, arithmetical sum of each factor’s scores based on grading criteria revealed that Dalseocheon and Namcheon were classified into Group A for their highest scores - 96 and 93, respectively -, and selected as rivers that require water environmental management measures the most. Also, water environmental contamination inspection showed that Palgeocheon had the most number of aquatic factors to be controlled: BOD5, CODMn, SS, TOC, T-P, Chl-a, etc.

The main entrance is even disappeared nowadays when the component type is changed, because it loses the actual function. On the other hand, the type of main entrance is changed variously depended on the materials for house and method of construction. Eleven points in the Chungyang-Gun where the environment of rural villages is well maintained was choosed researched to make data. These data of visual component elements were analysed by using the SPSS 12.0 Windows. Cluster Analysis and Factor Analysis was performed to analyze the different types of main entrance in the rural villages. From the above research, we could conclude below results. Research result, The whole quality of the farming village gate with fine feeling and constant temperature characteristic order appeared with the fact that preference quality is highest, in afterwords was analyzed. Also the research which sees led and the result which appears from the landscape quality analysis which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the abstractive landscape image has. Like this research result judges currently the research which is meaning which provides a planning standards and the guideline which the governmental department and the rural village improvement enterprising public opinion rural village residential enterprise which is propelling from oneself are detailed. Specially about landscape quality of the residential gate that presents a type classification and preference quality from the actual condition where the research is insufficient the hereafter rural village improvement enterprise specially, sees with the fact that will be the possibility of affecting is meaning to residential section the succeeding researches actively, there being could be advanced, wishes.

작물과학원에서 육성한 찰옥수수 자식계통을 대상으로 농업적 형질 및 품질관련 특성 등을 분석하여 계통군화 시켜 교배 모, 부본의 기초 자료로 이용하고 품질육종의 효율성을 높이기 위한 연구결과를 요약하면 다음과 같다. 1. 작물과학원에서 육성한 찰옥수수 64개 자식계통에 대해서 옥수수 낱알형태를 조사한 결과 백립중은 11.7~~37.3g ,과 피두께 11~~77mm , 립장 5.8~~9.6mm , 립폭 6.5~~10.0mm , 립두께 4.1~~6.8mm 의 분포를 나타내었다. 2. 이화학적 특성 분석에 있어서는 단백질 함량은 8.7~~15.8~% , 지방 2.3~~5.8~% , 유리당 1.1~~11.0~% , 아밀로펙틴 78.5~~93.8~% 의 다양한 변이분포를 보였다. 3. 아밀로그램을 분석한 결과 초기호화온도는 64.5~~79.1℃ , 최고점도 14.8~~221.8 RVU, 최저점도 12.2~~109.6 RVU, 최종점도 20.1~~212.6 RVU였으며 강하점도는 2.0~~l12.2 RVU, 치반점도 -81.3~~85.3 RVU, 응집점도 7.9~~105.0 RVU로 나타났다. 4. Texture 분석을 한 결과 껌성 91~~383 , 경도 181~~394 , 씹힘성 73~~370 의 범위에 속하였다. 5. 64개 자식계통을 대상으로 단백질 등 14개 형질을 이용하여 주성분 분석을 한 결과 제 1주성분은 단백질과 지방 함량이 높고 경도가 높은 것으로 나타나 주로 저식미 계통군으로 분류되며 백립중과 립장이 부의 값이어서 소립의 형태를 보였으며 제2주성분은 립장, 립폭, 백립중 등이 정의 값을 나타내어 대립의 계통군들이 포함되며 경도와는 부의 상관을 보여 식미가 양호한 계통군으로 분류되었다. 6. 제1주성분과 제2주성분을 이용하여 군집분석을 한 결과 8개 자식계통군으로 구분할 수 있었으며 scatter diagram에서 제1주성분이 작아지고 제2주성분이 커지는 좌측 상단부에 분포한 VII, VIII군에 속한 계통들이 주로 식미가 높으며 조숙종보다는 중, 만숙종들이 대부분 이였다.