The study aimed to investigate the impact of varying levels of neutral detergent-soluble fiber (NDSF) in Hanwoo growing cattle diets on rumen fermentation and methane (CH4) emissions. An in vitro rumen fermentation experiment utilized feeds with different NDSF levels, incorporating ingredients such as corn grain, soybean meal, soybean hulls, palm kernel meal, beet pulp and timothy hay. The NDSF contents in the diets were 9.02% (T1), 10.09% (T2), 12.42% (T3) and 14.63% (T4). In vitro dry matter digestibility (IVDMD) at 48 h was 7.4% higher for T4 compared to T1 (p<0.05). Total gas production at 48 h was 6.6% higher for T4 than T1 (p<0.05). CH4 production significantly decreased at 9 h and 12 h for T1 and T2 (p<0.05). At 48 h, CH4 production was 5.6% higher for T4 compared to T1 and 6.7% higher compared to T2 (p<0.05). At 12 h ans 24 h, the ammonia nitrogen concentration of T4 was approximately 33.1% and 40.4% lower, respectively, compared to T1 (p<0.05). The acetate to propionate ratio at 48 h was approximately 18.8% higher for T4 than T1 (p<0.05). From 9 h to 48 h, the proportions of butyrate and valerate were significantly higher for T4 (p<0.05). At 48 h, the dominant phylum in T4's rumen microbial community was Candidatus Thermoplasmatota Methanomassiliicoccus, an Archaea. Therefore, this study confirmed that increasing the NDSF content in growing Hanwoo cattle diets up to 12.42% increases IVDMD without increasing CH4 emissions, which is expected to positively impact Hanwoo productivity.

The purpose of this study is to optimize the extraction conditions (time, pH, and temperature) for water-soluble dietary fiber (SDF) and solids from Opuntia ficus-indica (OFI) stems and to evaluate the functionality of the optimized extract. The maximum extraction yield was obtained when 100% distilled water was used, indicating that ethanol hampered the extraction. The extraction yields were lower at higher temperatures and lower pHs. The maximum extraction of SDF (27.92%) and solids (5.6 g) was achieved with a 7-h extraction at 50oC and pH 7.0, with desirability being 0.958. The stem extract obtained under the optimum extraction conditions had an antioxidant capacity of 118.10 mg vitamin C equivalents (VCE) using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. In a medium containing 30% extract, the growth of E. coli was reduced by 34%, while that of B. cereus was reduced by 23%. These results suggest that OFI stems can be used as a functional resource.

The purpose of this study was to utilize the stem of Opuntia ficus-indica and to optimize the extraction conditions and standardize extract process for water soluble dietary fiber and solid. Extraction process was optimized by applying various conditions such as pH, ethanol concentration, extracting temperature and time. Maximum extraction yield for water soluble dietary fiber and solid were obtained using 100% water, indicating that ethanol hampered extraction. Also, extraction was unstable with higher heat, longer extraction time, and low acidic conditions. Maximum extraction of water soluble dietary fiber (27.92%) and solid (5.6 g) were obtained at 50°C, pH7, and 7 hr extraction time. Extract had antioxidant capacity at 1105.98 mg vitamin C equivalents (VCE) on ABTS assay and 118.10 mg VCE on DPPH assay.

Opuntia is a cactus with fruits and is also called prickly pear. Extraction process of water soluble fiber from opuntia stem powder was optimized by applying various conditions such as ethanol concentration, temperature and pH. Fiber extraction was highest in 0% ethanol and lowest in 100% ethanol, indicated that hot distilled water extraction produced maximum water soluble fiber. Among temperature range from 50 to 90°C, water soluble fiber was extracted mostly at 50°C and leastly at 90°C, showing decrease in fiber with increase in temperature. On the other hand, pH higher than 7 did not show any significant difference in fiber extraction, while fiber extraction decreased in lower pH 7. Conclusively ethanol hampered extraction of water soluble fiber from opuntia stem powder and extraction was not stable with higher heat and low acidic condition.

This study was conducted to investigate the physicochemical properties of the ethanol extracts and soluble dietary fiber from Cassia tora L. seed. The proximate composition of Cassia tora, soluble solid contents, color intensity and contents of emodin and rhein of Cassia tora extract, molecular mass distribution, sugar contents and viscosity of soluble fiber from Cassia tora were analyzed. Cassia tora contains 12.6% of moisture, 5.2% of ash, 13.4% of crude protein, 7.2% of crude fat, 8.8% of insoluble fiber and 48.3% of soluble fiber. The effects of extract condition on soluble solid contents, color intensity and contents of emodin and rhein of Cassia tora extract were investigated. The soluble solid contents were higher in 70% or 50% ethanol extracts than those in 100% ethanol extracts and showed highest value in grind sample extracts. In Hunter's color value, 100% ethanol extracts and whole Cassia tora sample extracts were higher in L and b value, but on the contrary, were lower in a value, than those of the other. The highest emodin and rhein contents were observed in 70% and 50% ethanol extracts, respectively, and showed higher value in room temperature extracts than in heating extracts. The molecular mass of soluble fiber from Cassia tora seed was estimated by gel filtration chromatography. Most soluble fiber(80%) exhibited a molecular mass range of between 50～2000 kDa. The major sugars of soluble fiber from Cassia tora seed were identified as xylose, mannose and galactose. The apparent viscosity of 0.5% soluble fiber from Cassia tora seed was 33 mPas showing a higher value than pectin or xanthan gum.

Copper alloy metal fiber was incorporated into the conventional water-soluble metal working fluids to increase the antimicrobial activity. Fluid treated by copper alloy metal fiber is shown that bacteria is disappeared whereas that untreated metal fiber is increased bacteria as increasing the life time. When the electrochemical potential of Cu/Zn ion is -268mV, radicals with molecular oxygen are easily made. Especially, hydroperoxide radical shows strong toxicity to the strains, leading to the conformational change of plasma membrane. As a result antimicrobial activity of copper alloy metal fiber in metal working fluid is superior to that of copper fiber.

This study is focused on the possibility of copper alloy metal fiber for an antimicrobial activity in the water soluble metal working fluids. Electrochemical potential of Cu/Zn ion is -268mV, and easily makes radicals with molecular oxygen. Especially, hydroperoxide radical shows strong toxicity to the strains. Plasma membrane causes conformational change when hydroperoxide radical binds to plasma membrane. Elution of copper ion from copper alloy metal fiber is detected in metal working fluid. As a result antimicrobial activity of copper alloy metal fiber in metal working fluid is superior to that of copper fiber.