Since korea must get 5.2% reduction of green gas emission and insecurity of economic impact is on the increase due to unstable oil market, the demands of energy saving techniques are increasing. In this paper, we investigate necessity of development of enormous energy used cleanroom energy saving techniques furthermore we also investigate the adoption of dependability management system to develop the energy saving cleanroom development process.
This paper investigates the optimal nesting system for a board. A hybrid method is used to search the optimal solution for rectangular nesting problem. This method is composed of heuristic approach algorithm. An engineer's experience of board nesting in which a loss occurred to sheet because of various individual error and diffidence. So, item layout at resource sheet were evaluated in engineering algorithm logic in which specially designed was installed. The nesting system consists of Lisp and Visual Basic. The system was controlled by AutoCAD so as to best item batch path test.
The LNG carriers have been propelled by steam turbines and the LNG boil-off(BOG) has been used as fuel or vented. However, as the alternative propulsion systems such as diesel engines are being equipped on the LNG carriers for better fuel efficiency, a need for the LNG BOG re-liquefaction system that liquefies the BOG and sends the liquid BOG back to the LNG cargo has arisen in recent years. This study investigates the design of the BOG re-liquefaction system based on the reverse Brayton refrigeration cycle. The thermodynamic and heat exchanger analysis are carried out and the limitations to the system performance are discussed.