콘크리트 포장의 내구성 저하는 포장체의 파손뿐만 아니라 사용자의 주행성에도 영향을 주며, 또한 유지관리 비용을 증가시키는 등 복합적 문제를 초래한다. 이러한 콘크리트 내구성 문제를 개선하기 위한 방안으로 콘크리트의 내부양생(internal curing)에 대한 관심이 고조되고 있다. 내부양생은 표면 살수나 피막양생제를 도포하는 기존의 양생 방식과는 달리 콘크리트 배합 시 수분공급 물질을 혼입하여 내부로부터 수분을 공급하는 기법으로, 양생효율을 현저히 증진시켜 역학적 특성, 투수 및 균열 저항성, 부피안정성 등 콘크리트의 다양한 성능을 향상시키는 것으로 잘 알려져 있다. 특히 포장용 콘크리트 배합과 같이 광물성혼화재(SCMs)를 포함하는 경우, 소요성능의 발현을 위해서는 철저한 양생이 무엇보다 중요하다. 이에 착안하여 본 연구에서는 최근 콘크리트의 내부양생 재료로서 각광을 받고 있는 고흡수성폴리머(SAP)를 적용한 모르타르의 강도 및 부피변화 특성을 파악하여 콘크리트 포장에의 적용 가능성을 평가하였다. 이를 위하여 가교밀도와 평균 입자크기가 다른 4종의 폴라아크릴산나트륨 SAP를 혼입한 모르타르를 제작하고 SAP 함량 및 종류별 강도 발현, 자기수축 및 내부 상대습도 거동 특성을 측정하였다.

기후변화로 인한 결빙, 폭설, 집중호우 등 도로에서의 기상조건은 해마다 수많은 인명 피해를 유발하고 있다. 그러나 급변하는 기상상태에 신속하게 대처할 수 있는 도로기상 대응체계가 미흡하여 교통사고로 인한 사회·경제적 손실이 가중되고 있다. 최근 교통사고 통계자료에 의하면 기상상태가 좋지 않을 때의 교통사고치사율은 맑은 날씨일 때 보다 2～3배 심각한 것으로 나타났다(교통안전공단 2016). 따라서 기상악화 시 교통사고예방에 필요한 구체적이고 상세한 기상정보를 운전자에게 제공함으로써 교통사고예방 및 도로 운영의 활용성을 높일 수 있는 도로기상 모델개발이 필요하다. 도로기상 모델과 관련해서 도로기상 선진국(유럽, 캐나다, 일본, 미국 등)은 1990년대 초반부터 도로 노면온도와 노면 결빙점 예측을 위한 다양한 모형을 개발하고 모델의 성능을 검증하기 위한 노력을 기울이고 있다(Meng, 2014; Sato, 2004). 이들 국가는 주요 도로에 대해서 도로기상 관리지원시스템을 구축‧운영하고 있으며, 개발된 모델로부터 추정된 노면상태 정보를 도로이용자 및 도로관리자에게 제공함으로써 교통사고 및 도로파손 손실에 따른 사회적 비용을 줄여나가고 있다. 우리나라 도로기상 분야는 결빙 취약구간인 터널의 입·출입부에 수용액 형태의 제설제 자동 분사장치를 설치하여 운영하고 있는 단계로서 도로기상 선진국과 같이 도로구간 단위로 확장하여 서비스할 수 있는 기술은 미흡한 단계이다. 이들 국가와 같이 도로기상 관리지원시스템을 운영하여 주요 도로에 대해서 도로기상 정보를 실시간으로 서비스하기 위해서는 도로의 한 지점만을 대상으로 하는 기술대응 보다는 전체 도로구간의 노면상태를 예측할 수 있는 기상상황별 통합모델 개발이 우선시 되어야 한다. 이러한 기술개발의 필요성에 따라서 본 연구에서는 기상상황별 노면상태를 서비스할 수 있는 통합모델을 개발하였다. 첫 번째 모델은 겨울철 도로노면의 상태를 예측할 수 있는 모델이다. 노면상태 예측모델은 기계학습 방법 중에 하나인 의사결정나무(Decision Tree) 알고리즘 기반으로 개발되었으며, 이동형 차량(Probe vehicle)에서 수집되는 기상입력 자료를 학습하여 기상요소에 따른 4가지 노면상태(Dry, Moist, Wet, Ice)를 예측할 수 있다. 두 번째로 집중호우 기간에 도로에서 발생하는 도로의 수막정보를 예측할 수 있는 모형이다. 도로의 수막예측 모델은 기상청에서 제공하는 1시간 단위의 AWS(Automatic Weather System) 자료와 10m 단위의 도로기하구조 정보를 활용하였다. 도로에서의 강우량 추정은 kNN(k-Nearest Neighbors)기법을 활용하여 대상도로와 가장 가까운 AWS 관측소의 강우정보를 각 해당 도로구간에 할당하였다. 현재 본 도로기상 통합모델은 서울시 내부순환로와 올림픽대로에 대해서 실시간 서비스할 수 있도록 생산체계가 구축되었다. 도로기상 통합모델은 우리나라 주요 도로에 적용이 가능하여 하절기의 집중호우로 인한 물이 고인 도로지점과 동절기의 기온강하로 인한 도로의 결빙현상 등 도로노면상태 정보를 실시간으로 서비스할 수 있다. 또한 기상 악화 시 도로를 효율적으로 관리할 수 있는 의사결정 도구로 활용되어 교통재난 및 도로파손을 줄이는데 기여할 수 있을 것이다.

Open-graded aggregate is a material that contains significant distribution with few fine particles and high void content. Therefore, it provides high permeability and bearing load from grain-to-grain contact. As a result, in pavement system, this material is usually used for base and subbase courses which are support the pavement in load-bearing capacity and drainage for serving the life of road. When design pavement system with open-graded aggregate, the importance for engineers is designing base/subbase courses which not only meet the requirement of strength, displacement and drainage but also economy. During decades, there is a few researches about the necessary characteristics of this kind of aggregate. The overall objective of this study is summarize some researches in resilient modulus and permanent deformation of open-graded aggregate for understanding well the factors that need to be considered during design pavement.

In order to improve the high temperature oxidation resistance and lifespan of mat type porous carbon insulation, SiC was coated on carbon insulation by solution coating using polycarbosilane solution, curing in an oxidizing atmosphere at 200 oC, and pyrolysis at temperatures up to 1200 oC. The SiOC phase formed during the pyrolysis process was converted into SiC crystals as the heat treatment temperature increased, and a SiC coating with a thickness of 10-15 nm was formed at 1600 oC. The SiC coated specimen showed a weight reduction of 8.6 % when it was kept in an atmospheric environment of 700 oC for 1 hour. On the other hand, the thermal conductivity was 0.17W/mK, and no difference between states before and after coating was observed at all.

The life and astronomical activity of Lee Deok-Seong (李德星, 1720-1794) was studied using various historical sources, including the astronomical almanac, Seungjeongwon-Ilgi (Daily records of Royal Secretariat of Joseon dynasty), and the Gwansang-Gam’s logbooks during Joseon dynasty (A.D. 1392– 1910). We present the results of the study including the following main findings. First, from the investigation of Lee’s family tree, we find that a number of his relatives were also astronomers, notably Samryeok-Gwan (三曆官, the post of calendrical calculation). Second, we find that he took part in the compilation of an annual astronomical almanac over a period of at least 16 years. His major achievements in the astronomy of the Joseon dynasty were to establish a new method of calendar-making calculation and to bring astronomical materials to the Joseon court through a visit to China. The Joseon dynasty enforced the Shixianli (時憲曆, a Chinese calendar made by Adam Shall) in 1654 without fully understanding the calendar. So an astronomer and an envoy were dispatched to China in order to master the intricacies of the calendar and to learn as much of Western science as was available in that time and place. Lee Deok-Seong worked at the Gwansang-Gam (觀象監, Royal Astronomical Bureau) during the reigns of King Yeongjo (英祖) and Jeongjo (正祖). As best as we can ascertain in relation with the calculations in the Shixian calendar, Lee visited China four times. During his trips and interactions, he learned a new method for calendar-making calculations, and introduced many Western-Chinese astronomical books to Joseon academia. Lee greatly improved the accuracy of calendrical calculations, even while simplifying the calculation process. With these achievements, he finally was promoted to the title of Sungrok-Daebu (崇祿 大夫), the third highest grade of royal official. In conclusion, history demonstrates that Lee Deok-Seong was one of the most outstanding astronomers in the late-Joseon dynasty.

본 연구를 통해 Spathius속의 Spathius depressithorax Belokobylskij, 1998 <납작가슴자루배고치벌 (신칭)>를 우리나라에서는 처음으로 보 고한다. 본 종의 식별형질과 성충을 검경하고 도해하였으며, 한국산 Spathius속의 목록을 제시한다.

To gather information on the indoor air quality of the greenhouses used for edible oakwood mushroom cultivation, temperature, humidity, and bacterial concentration and species were investigated in 2015 and 2016 in 21 mushroom greenhouses located in ten different regions in Korea. Temperature and humidity of all the mushroom greenhouses ranged from 16.2 to 30.8°C and from 28.2 to 85.6%, respectively. Bacterial concentration exceeded the Korean indoor air quality standard value (800 cfu/m3) in 15 of the 21 mushroom greenhouses. A total of 33 genera and 76 species were identified in the indoor air of the mushroom greenhouses investigated. Of the identified bacteria, 10 genera and 15 species including Acidovorax oryzae, Bacillus infantis, B. licheniformis, Cellulosimicrobium funkei, Ewingella Americana, Exiguobacterium sibiricum, Leclercia adecarboxylata, Lysinibacillus sphaericus, Pseudomonas fulva, Raoultella terrigena, Staphylococcus cohnii, S. haemolyticus, S. saprophyticus, S. sciuri, and Streptomyces sindenensis are among those known to have a harmful effect on human health. These bacteria have been reported to cause sepsis, skin infection, bloodstream infection, bacteremia, spondylitis, peritonitis, acute meningitis, endocarditis and urinary tract infection. The results of this study indicate that continuous hygiene management of indoor air is necessary in the greenhouses used for oakwood mushroom cultivation.

귤나무속 과수의 주요 해충인 귤응애의 방제효과 극대화를 위해 괭이밥의 천적유지식물 적용 가능성을 검토하였다. 괭이밥을 지피식물로 조성한 처리구에서 일반 초생재배구에 비해 포식성 응애류 밀도가 평균 3배 이상 높게 나타났으며, 제초구에 비해 3.7배 낮은 귤응애 발생 밀도를 확인 할 수 있었다. 칠레이리응애는 괭이밥응애 알과 성충을 포식하지 못하였고, 사막이리응애는 일일 평균 괭이밥응애 알 1.96개와 암컷 성충 1.93개를 포식하였다. 온도 23 ± 1℃, 습도 70 ± 5%, 광조건 16L : 8D로 설정된 사육실에서 괭이밥응애 알에서 성충까지 17.4일이 소요되었으 며 77.5%의 부화율과 84.8%의 유충생존율을 확인하였다.

This study was conducted to clarify the effect of high temperature during winter period(autumn sowing) and spring sowing on yield, quality and growth and development in barley. The varieties used for the experiments were heenchalssalbori and keunalbori 1 having a strong spring habit characteristics. In spring sowing treatment, spikelet differentiation was proceeded rapidly and tillering was proceeded slowly compared to the development stage, because the barley sowed at spring is cultivated in high temperature and long day conditions from sowing to spikelet differentiation stage compared with autumn sowing(control). And in high temperature treatment during winter period, like spring sowing, tillering was inhibited compared to the development stage. The number of grain per panicle and the period required to heading stage from spikelet differentiation were reduced largely at spring sowing, because spring sowing treatment was conducted in high temperature and long day condition compared with autumn sowing and high temperature treatment during the period from spikelet differentiation to heading stage. Meanwhile in spring sowing treatment, average temperature during ripening stage was higher than the autumn sowing and high temperature during winter, because heading stage was so late. After all, starch, amylose content and grain weight were reduced while protein content was relatively increased in spring sowing treatment due to difference of average temperature of ripening stage. These changes affected the decrease of viscosity of peak, trough, breakdown and the increase of setback viscosity

This study aimed to analyze the status of major countries’ online national language dissemination for overseas learners. This was done by the representative national organizations founded with governmental support. The study comparatively analyzed the dissemination status of the representative organizations of other countries and representative Korean organizations for Korean language education. The results of the comparative analysis of the major websites of the seven countries investigated in this study revealed the following characteristics. First, the websites were categorized into integrated single and divided dual websites according to their characteristics. Second, the language and cultural content varied depending on whether the websites provided information on offline education service or not. Third, there was a major difference in the number of service languages available on each website. Further, it was distinguished by its strength in providing a variety of specialized learning materials including self-learning modules, video clips, webtoons (internet-based comics), and study materials. However, it was also revealed that further improvements were required in promoting offline education programs and introducing the Test of Proficiency in Korean (TOPIK). This study is valuable because the analysis results suggest implications for improvements to be made to the website of the Korean language for better dissemination.

접수 및 대목 줄기의 회전 절단으로 인한 접목 불량 발생 가능성에 대한 문제점을 해결하기 위하여 수학적 분석 및 고속카메라를 이용하여 실측한 결과 칼날 회전 반경 50mm이고 줄기직경이 5mm 일 때, 깊이는 0.11mm 인 것으로 계산되어 줄기부 곡면 절단에 따른 문제는 없을 것으로 사료된다. 또한 접목시스템에서 모종 줄기를 잡는 그립퍼의 최적 형상 설계를 위하여 실시한 모종 줄기 압축시험 결과 대목의 경우 0.8mm 이상, 접수의 경우 0.6mm 이상의 범위에서 줄기부를 압축 할 경우 이전 형상으로 완전히 복원되지 않는 것으로 조사되어 그립퍼 형상 설계 시 그럼퍼 간격 결정에서 고려해야 할 것으로 사료된다. 또한 접목시기인 토마토 모종의 경우 줄기의 휨이 평균 10도 전후 인 것으로 조사되어 접목불량이 발생할 가능성이 있으므로 이를 개선하기 위한 추가 연구가 필요할 것으로 사료된다. 최적핑거 형상 시험에서는 모서리핑거 형상이 핑거간 거리 조정을 통해 정확한 중앙점을 잡을 수 있는 것으로 조사되었다. 핑거 간 거리는 접수와 대목에 대해 각각 2.5mm와 3.0mm로 설정하고 신축성 있는 재질을 이용하여 1mm 두께로 코팅을 하면 대부분의 모종 줄기를 상처없이 파지 할 수 있을 것으로 조사되었다.

This study is an empirical study on the relationships among success factors of six sigma(support of top management, education and training, performance-based reward, customer and quality focused thought) on change management activity and business performance. In particular, mediating effect of change management activity on the relationship between success factors of six sigma and business performance is empirically analysed to find causes and impacts among these variables. The study results are as follows: First, there were positive relationships between critical success factors of six sigma(except support of top management) and change management activity. Second, there was also a positive relationship between change management activity and business performance. Third, there were also positive relationships between critical success factors of six sigma and business performance. Finally, change management activity was partial mediating effects on the relationship between critical success factors of six sigma(education and training, performance-based reward, customer and quality focused thought) and business performance. On the other hand, support of top management had no mediating effect on business performance.

본 연구는 국내 강도 범죄자들의 동종 전과 유무에 따라 가해자와 피해자의 배경 특성, 범행 장소, 범행 수법 등에 있어 차이점이 나타나는지를 살펴보고자 하였다. 더불어, 강도 범죄자에게 있어 동종 전과가 있는지를 예측하는 요인들을 알아보고자 하였다. 국내에서 2011년부터 2013년 사이에 기소된 강도 사건 중 기록 조사로 수집된 총 512건을 바탕으로, 가해자가 동종 전과가 있는 186건을 동종 전과가 없는 326건과 비교하여 분석하였다. 그 결과, 우선 동종 전과가 있는 강도 범죄자의 경우 그렇지 않은 범죄자들에 비해 평균 연령이 더 높았으며, 여성을 대상으로 범죄를 저지른 비율이 더 높은 것으로 나타났다. 또한 동종 전과가 있는 강도 범죄자들은 흉기나 결박도구 등을 미리 준비하여 범행을 저지른 비율이 더 높았으며, 주거침입강도의 비율이 더 높았다. 반면, 동종 전과가 없는 강도 범죄자의 경우 주로 자신의 거주지나 그 인근에서 노상강도를 저지른 비율이 더 높은 것으로 나타났다. 마지막으로 본 연구의 한계점과 함께, 강도 범죄 전과가 범행에 미치는 영향 및 강도 범죄자 재범 방지에 대한 시사점에 대해 논의하였다.

The rapid growth of engineering technology and the emergence of systemized and large-scale engineering systems have resulted in complexity and uncertainty throughout the lifecycle activities of engineering systems. This complex and large-scale engineering system consists of numerous components, but system failure can be caused by failure of any one of a number of components. There is a real difficulty in managing such a complex and large-scale system as a part. In order to efficiently manage the system and have high reliability, it is necessary to structure a system with a complex structure as a sub-system. Also, in the case of a system in which cause of failures exist at the same time, it is required to identify the correlation of the components lifetime and utilize it for the design policy or maintenance activities of the system. Competitive risk theory has been used as a theory based on this concept. In this study, we apply the competitive risk theory to the models with combined structure of series and parallel which is the basic structure of most complex engineering systems. We construct a competing risks model and propose a mathematical model of net lifetime and crude lifetime for each cause of failure, assuming that the components consisting a parallel system are mutually dependent. In addition, based on the constructed model, the correlation of cause of failure is mathematically analyzed and the hazard function is derived by dividing into net lifetime and crude lifetime.

Tissue engineering (TE) has been developed to create functional organs and tissue by combining 3D matrix and cells in vitro. Vascularization and angiogenesis are utmost important for supply of nutrients and oxygen in tissue engineered organs. The present study was performed to isolate and characterize primary endothelial cells (EC) from aorta of alpha 1, 3-enzyme galactosyltransferase knock out (GalT KO) pig, to minimize immune rejection and analyze body immune system for future xenotransplantation studies. Isolation of primary EC from aorta were performed by incubation with dispase for 8-10 min at 37°C. Primary EC were cultured in EC growth medium on different extra cellular matrix (ECM), either collagen or gelation. Primary EC exhibits morphological characteristics and showed positive expressions of EC specific marker proteins i.e. PECAM1, KDR and VWF despite of their ECM surface; however, on collagen based surface they showed increase in mRNA level analyzed by qPCR. Primary EC cultured on collagen were sorted by flow cytometer using KDR marker and cultured as KDR positive cells and KDR negative cells, respectively. KDR positive cells showed dramatically increased in PECAM1 and VWF level as compared to KDR negative cells. Based on the above results, primary EC derived from GalT KO are successfully isolated and survived continuously in culture without becoming overgrown by fibroblast. Therefore, they can be utilize for xeno organ transfer, tissue engineering, and immune rejection study in future.

The purpose of this study is to review the relationship between emotional labor and job burnout, and the moderating effects of peer and superior support in social welfare agency. In order to verify and achieve the purposes mentioned above, questionnaire data were gathered and analysed from 349 employees of social welfare agency in western Kangwon-do province. Empirical survey's findings are as follows; First, deep action(DA) appeared to be negatively related with depersonalization and reduced accomplishment. Second, surface action(SA) appeared to be positively related with all job burnout factors(emotional exhaustion, depersonalization and reduced accomplishment). Third, peer support moderated negatively the relationship between emotional labor(DA, SA) and emotional exhaustion. Fourth, superior support moderated negatively the relationship between deep action(DA) and emotional exhaustion.