This study evaluated the migrant and residue tests of lead (Pb), cadmium (Cd), nickel (Ni), arsenic (As), and antimony (Sb) in 70 tumbler samples. The migration levels of hazardous metals in all the samples were within the migration limits outlined in the Korean standards and specifications for utensils, containers, and packages. Moreover, in all the tumbler samples, only Ni was detected in 0.5% citric acid solution of a food stimulant. The maximum level of Ni 0.0144 mg/L was 14.4% of the migrant specification (not more than 0.1 mg/L), which was relatively safe. The 0.5% citric acid solution was eluted at 4oC, 70oC, and 100oC for 30 min, and only Ni was detected while testing for migration levels according to the temperature variations; all temperature conditions conformed to the standards. The level of Ni migration increased significantly with increasing migration temperature. Regarding the residue level outside the paint-coated tumbler samples, the Pb level was found to range from N.D. to 20638.1323 mg/kg. The risk of Ni was further estimated to be at a safe level of 0.00 to 0.01% compared to the %TDI as a result.

In this study, heavy metals (lead, cadmium, and mercury) and shellfish poisoning toxins (diarrhetic shellfish poisoning toxins, amnesic shellfish poisoning toxins) were investigated in a total of 104 shellfishes. According to the analysis of heavy metals, lead (Pb) was detected in the range of 0.0177-0.5709 mg/kg, cadmium (Cd) was detected in the range of 0.0226-1.4602 mg/kg, and mercury (Hg) was detected in the range of 0.0015-0.0327 mg/kg. Levels of Pb, Cd, and Hg were acceptable by Korean standards. Okadaic acid (OA) and dinophysistoxin-1 (DTX-1) were investigated for monitoring of diarrhetic shellfish poisoning toxins and OA and DTX-1 were not detected. As a result of monitoring of amnesic shellfish poisoning toxins, domoic acid was detected in 5 of 104 samples and detection ratio was 4.8%. The detection period was found as follows; 1 case in January, 1 case in February, 1 case in May, 2 cases in September. These showed that continuous monitoring for the management of shellfish poisoning toxins and heavy metals is required. In addition, this study can be used as reference data to strengthen managing heavy metals in fishery products.

The official analytical method for the analysis of harmful heavy metals in Meju, distributed in Korea, employs a strong acid to decompose the organic components. This analysis is time consuming and harmful to the users and/or the environment. This study aimed to develop a new pre-treatment technology using laser ablation, to rapidly analyze harmful heavy metals without using strong acids. The results obtained from this method were validated by the National Institute of Food and Drug Safety Evaluation guideline (NIFDS, 2016). Moreover, a comparison of the two methods showed that the analytical time for 55 Meju samples was shortened by 96% or more in the new method. The results showed no significant difference in the recovery ranging from 90–120%. The proposed method proved suitable for detecting harmful heavy metals in Meju.

The formation behavior of a passive state film on the surface of STS304 in electrolytic solution was analyzed to determine its metallic ion composition. The properties of passive state films vary depending on the Fe and Cr ions in the electrolytic solution. It was observed that the passive state film surface became flat and glossy as the concentration of Fe and Cr ions in the electrolytic solution increased. The corrosion resistance property of the passive state film was proportional to the amount of Fe and Cr in the electrolytic solution. An initial passive state film with high Fe concentration was formed on the surface of STS304 during early electrolytic polishing. Osmotic pressure of Fe ions occurs between the passive state film and electrolytic solution due to the Fe ion concentration gradient. The Fe in the passive state film is dissolved into the electrolyte, and Cr fills up the Fe ion vacancies. As a result, a good corrosion-resistant floating film was formed. The more Fe ions in the electrolytic solution, the faster the film is formed, and as a result, a flat passive state film containing a large amount of Cr can be formed.

In order to provide basic data for preparing management standards and to verify the safety of the Chinese oak mushroom-derived moisturizing medium—which is synthesized and imported in large quantities—the presence of 321 residual pesticides, 7 heavy metals, and 3 radioactive materials was analyzed in the moisturizer samples. Examination of residual pesticides in seven moisturizing medium samples prepared using the Chinese oak mushroom and three domestic sawdust samples used for mushroom culture revealed the presence of cypermethrin and iprodione in three moisturizer samples, but the contents of these pesticides were below the standard limits. Zn was detected in ten samples, Cu was detected in nine samples, and Ni was detected in four samples, but their contents were below the standard limits. Pb, Cd, Cr, and Hg were not detected in any sample. No radioactive materials were detected in the samples. In addition, fruiting bodies of the oak mushroom were observed in each medium. Examination did not reveal the presence of any residual pesticides or harmful compounds. In this study, the use of the moisturizing medium prepared using the Chinese oak mushroom was found to be safe. As residual pesticides, heavy metals, and radioactivity—even in trace amounts—remain concentrated in the human body, continuous verification of the safety of hazardous substances and pollutants during the systematic cultivation and management of these mushrooms is required.

본 연구에서는 stainless steel로 재질로 된 금속평막모듈을 이용하여 고플럭스가 유지되면서 처리수의 안정화 방 안을 모색하였다. 이 모듈은 기공사이즈가 13 μm 단위여서 플럭스가 60 LMH에서 100 LMH까지 고플럭스로 운전이 가능하 다 그러나 SS가 초기 운전 시 30~50 ppm 정도 유출되지만 SS가 응집핵으로 작용하므로 응집이 가능하게 된다. 기존 고분자 막 여과수는 응집핵이 없어서 coagulation은 되지만 floculation이 안되므로 추가적으로 응집보조제인 clay나 벤토나이트를 투 여하게 되는데 본 연구에서는 이런 응집보조제 필요 없이 SS 누출만으로 floculation이 되므로 총인처리와 처리수질이 안정성 을 도모하고자 하였다. 최종적으로 안정적인 처리수에 고플럭스가 가능한 Metal필터 운전이 MBR 시스템에서 적용가능한지 타당성을 연구하고자 하였다.

Transition metal carbides (TMCs) are used to process difficult-to-cut materials due to the trend of requiring superior wear and corrosion properties compared to those of cemented carbides used in the cutting industry. In this study, TMC (TiC, TaC, Mo2C, and NbC)-based cermets were consolidated by spark plasma sintering at 1,300 oC (60 oCmin) with a pressure of 60 MPa with Co addition. The sintering behavior of TMCs depended exponentially on the function of the sintering exponent. The Mo2C-6Co cermet was fully densified, with a relative density of 100.0 %. The Co-binder penetrated the hard phase (carbides) by dissolving and re-precipitating, which completely densified the material. The mechanical properties of the TMCs were determined according to their grain size and elastic modulus: TiC-6Co showed the highest hardness of 1,872.9 MPa, while NbC-6Co showed the highest fracture toughness of 10.6 MPa*m1/2. The strengthened grain boundaries due to high interfacial energy could cause a high elastic modules; therefore, TiC-6Co showed a value of 452 ± 12 GPa.

본 연구는 나노섬유를 제조하는데 빠르고 효과적인 전기방사법을 이용하여 PVA(Polyvinyl alcohol)와 AgNO3를 혼합하여 제조한 용액을 금속산화물 기반 나노 섬유로 이루어진 투명 전극을 제조하고 그 특성을 분석하였다. PVA/AgNO3 혼합 용액을 전기방사법을 이용하여 유리기판 위에 나노 섬유 구조체 형태로 방사하여 250 ℃에서 2 시간 동안 열처리 과정을 통해 전기 전도성이 향상된 은 나노 섬유 기반 투명 전극을 제조하였다. 제조된 투명전극은 four-point probe 장비를 이용하여 전기적 특성을 분석하였으며, UV - Vis spectrophotometer 를 이용하여 제조된 투명전극의 투과도를 확인하였다. 또한, Scanning Electron Microscopy (SEM)과 Energy Dispersive Spectrometer(EDS)를 통해 은 나노 섬유의 표면 특성과 성분을 확인하였다. 이러한 분석들을 통해, 전기 방사 시간에 따른 면 저항과 투과도의 최적화된 조건을 확인할 수 있었으며, 은 나노 섬유로 이루어진 투명 전극은 전기적, 광학적, 기계적 특성이 우수하여 태양전지, 디스플레이, 터치스크린과 같은 차세대 유연 디스플레이에 적용 가능성을 보여주었다.

The purpose of this study is to develop a zirconium-based alloy with low modulus and magnetic susceptibility to prevent the stress-shielding effect and the generation of artifacts. Zr-7Cu-xSn (x = 1, 5, 10, 15 mass%) alloys are prepared by an arc melting process. Microstructure characterization is performed by microscopy and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness and compression test. The magnetic susceptibility is evaluated using a SQUIDVSM. The average magnetic susceptibility value of the Zr-7Cu-xSn alloy is 1.176 × 108 cm3g1. Corrosion tests of zirconiumbased alloys are conducted through polarization test. The average Icorr value of the Zr-7Cu-xSn alloy is 0.1912 A/cm2. The elastic modulus value of 14 ~ 18 GPa of the zirconium-based alloy is very similar to the elastic modulus value of 15 ~ 30 GPa of the human bone. Consequently, the Sn added zirconium alloy, Zr-7Cu-xSn, is very interesting and attractive as a biomaterial that reduces the stress-shielding effect caused by differences of elastic modulus between human bone and metallic implants. In addition, this material has the potential to be used in metallic dental implants to effectively eliminate artifacts in MRI images due to low magnetic susceptibility.

고용량 배터리에 대한 요구가 증가에 따라 기존 음극재보다 높은 용량(3,860 mAh/g)과 낮은 전기화학적 전위(– 3.040 V)를 갖는 리튬 금속 기반 음극재에 대한 연구가 활발하게 이루어지고 있다. 본 연구에서는 수열 합성을 통해 제작된 아나타제(anatase) 타입의 TiO2 나노 입자 기반한 PVdF-HFP/TiO2 복합체를 리튬 금속 음극의 계면 보호층으로 적용하였다. 결정구조 및 형상 분석을 통해 유/무기-리튬 나노복합체 박막의 형성을 확인하였다. 또한, 전지화학 테스트(사이클 테스트 및 전압 프로파일)를 통해 리튬 금속 음극의 전기화학 성능은 복합체 보호막이 TiO2 10 wt%, 코팅 두께 1.1 μm의 조건에서 가장 개선된 전기화학적 성능(콜롱 효율 유지: 77 사이클 동안 90% 이상) 발현을 확인하였다. 이를 통해, 처리하지 않은 리튬 전극 대비 본 보호층에 의한 리튬 금속 음극의 성능 안정화/개선 효과가 검증되었다.

본 연구를 통해 국내 주요 한약재인 복령의 유해물질에 대한 안전성 확립과 허용기준치 설정의 기초자료를 제공하고자 한다. 국내 유통 중인 복령 10건(국내산 5건, 중국 산 5건)에 대한 잔류농약(321종), 중금속(7종), 방사능(3종), 회분 함량을 분석하였다. 잔류농약은 국내산 1건에서만 농약 성분인 cypermethrin 0.03mg/kg이 검출되었으나 기준치 이하로 나타났다. cypermethrin은 과수 및 원예농업에서 해충 방제의 살 충제로 사용되는 성분이다. 중금속은 Hg를 제외한 Zn, Pb, Ni, Cu, Hg, Cr가 모든 시료에서 검출됐지만 기준치 이하로 나타났다. Cd는 중국산 1건에서 0.011 mg/kg이 검출되었다. 방사능 농도도 모든 시료에서 MDA값 이하로 나타나 불검출 수준이었으며, 회분 함량도 모든 시료에서 기준치인 1.0% 이하로 나타났다. 이번 조사에서 국내에 유통 중인 복령의 유해물질에 대한 위해성은 안전하게 나타났다. 일반적으로 버섯류는 중금속 함량이 높다고 알려져 있다. 복령은 토양 속에서 생장하는 재배 특성상 유해물질에 항시 노출되어 있으므로 재배, 저장, 유통 등 생산단계 전반에 대한 지속적인 모니터링과 체계적인 관리기준 설정이 필요할 것으로 보인다.

Four types of metal oxide semiconductor gas sensor arrays were used to observe the aroma and spoilage odor emitted during the ripening process of plum & banana fruits. All gas sensors showed a high correlation (R=0.82~0.90) with the olfactory. The TGS 2603 sensor showed a high correlation of 0.90 between the odor generated and sensory perception of smell in the process of ripening and decaying fruits. In addition, it showed a very high correlation of 0.91 with the decay rate of the plum sample, and the significance probability through one-way ANOVA was also less than 0.05, which confirmed it as an optimal gas sensor (TGS 2603). Principal component analysis was performed using all the data. The cumulative variability was 99.54%, which could be explained only by two principal components, and the first principal component was 95.11%, which was related to the freshness of the fruit. It was analyzed as fresh fruit in the negative(-) direction and decayed fruit in the positive(+) direction.