검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 1,677

        1381.
        2008.01 KCI 등재 서비스 종료(열람 제한)
        The frequency analysis and the probability plot were applied to heavy metal contents of soils collected from the Goseong Cu mine area as a statistic method for the determination of the threshold value which was able to partition a population comprising largely dispersed heavy metal contents into the background and the anomalous populations. Almost all the heavy metal contents of soil showed a positively skewed distributions and their cumulative percentage frequencies plotted as a curved lines on logarithmic probability plot which represent a mixture of two or more overlapping populations. Total Cu, Pb and Cd data and extractable Cu and Pb data could be partitioned into background and anomalous populations by using the inflection in each curve. The others showed a normally distributed population or an largely overlapped populations. The threshold values obtained from replotted frequency distributions with the partitioned populations were Cu 400 mg/kg, Pb 450 mg/kg and Cd 3.5 mg/kg in total contents and Cu 40 mg/kg and Pb 12 mg/kg in extractable contents, respectively. The thresholds for total contents are much higher than the tolerable level of soil pollution proposed by Kloke(Cu 100 mg/kg, Pb 100 mg/kg, Cd 3 mg/kg), but those for extractable contents are not exceeded the worrying level of soil pollution proposed by Ministry of Environment(Cu 50 mg/kg, Pb 100 mg/kg). When the threshold values were used as the criteria of soil pollution in the study area, 9~19% of investigated soil population was in polluted level. The spatial distributions of heavy metal contents greater than threshold values showed that polluted soils with heavy metals are restricted within the mountain soils in the vicinity of abandoned mines.
        1383.
        2007.12 KCI 등재 서비스 종료(열람 제한)
        Heavy metal concentrations in the soil were investigated for the abandoned Samkwang metal mine, Cheongyang-Gun, Chungnam Province, Korea. The concentrations of heavy metal(As, Cd, Cu, Ni, Pb, Zn) were determined in mine soils collected at the abandoned mine sites to obtain a general classification and specification of the pollution in this highly polluted region. The results estimated with the normal test and basis statistic on the central tendency and variation showed that the distribution of heavy metal concentration had significantly different at the range of all locations. The range of spatial distribution on the relationship of heavy metal concentration and pH was 4.8∼8.8 and heavy metal concentration on the type of land use was highest in forest land, and also Ni and Zn in farm and rice field showed the high concentration. The distribution of heavy metal concentration on the depth of a soil showed that the metal concentrations in subsoil were higher than of those in surface soil, while the concentration of Cu and Ni had no significant difference on the depth of soil. Results from the correlation analysis using the data except the extreme and unusual data revel that Zn-Cd(r=0.867), Zn-As(r=0.797), Zn-Pb (r=0.764), Cu-Cd(r=0.673), Cu-As(r=0.614) and Zn-Ni(r=0.605) were the most important parameters in assessing variations of heavy metal in soil. To discriminate pattern differences and similarities among samples, principal factor analysis(PFA) and cluster analysis(CF) were performed using a correlation matrix. This study suggests that PFA and CF techniques are useful tools for identification of important heavy metal and parameters. This study presents the necessity and usefulness of multivariate statistical assessment of complex databases in order to get better information about the quality of soil and gives the basis information to clean up the abandoned mine sites.
        1384.
        2007.12 KCI 등재 서비스 종료(열람 제한)
        본 연구에서는 이득 평탄화된 어븀첨가 광섬유 증폭기를 제작하였다. 이득 평탄화 필터는 주기적으로 배열된 금속선을 이용하여 유도되는 장주기 광섬유 격자로 구현하였다. 980 nm 펌핑 레이저에 의해 증폭된 자발방출 출력 스펙트럼의 C-밴드 파장 영역에서 이득 리플을 제작된 필터를 적용하여 1 dB 이내로 억제하였다. 다중 채널을 동시에 증폭시킬 수 있는 성능은 페브리 페롯 레이저 다이오드를 이용하여 측정하였고 C-밴드에서 20 dB 이상 증폭시킬 수 있음을 보여주었다. 이 증폭기는 파장분할 다중화 방식의 장거리 광 전송에서 다중 채널을 동시에 증폭하는 효과적인 방법을 제공할 것이다.
        1386.
        2007.12 KCI 등재 서비스 종료(열람 제한)
        경주 황성동 목곽 2호묘에서 3세기 중후반대에 제작된 것으로 추정되는 말각 장방형의 단조 철부가 출토되었다. 이 철부의 재질은 금속광택에 밝은 회백색을 보이며 연한 크림색조를 나타냈으며, 광학적 성질은 자철석 또는 자연철의 특징과 거의 유사하다. X-선 회절분석 결과, 자철석과 침철석만이 검출된 것으로 보아 단조철부의 제작에 이용된 원광석의 조성과 조직이 그대로 보존되었음을 반영하고 있다. 철부의 내부에서는 미립의 내포물이 불규칙하게 산출되었다. 이는 철부의 원광석에 수반되었던 석영, 방해석, 운모, 자철석, 각섬석, 중석광물, 휘석 및 감람석 등이 열처리 과정에서 제거되지 않은 불순물인 것으로 판단된다. 이 철부는 전반적으로 페라이트와 시멘타이트가 공존하는 펄라이트 조직을 보이며, 탄소의 함량은 비교적 높으나 균질하게 분포하는 부분이 있는 것으로 보아, 거의 순철에 가까운 소재로 성형한 후에 침탄이 이루어 진 것으로 추정된다. 이 철부의 산출상태와 수반 내포물로 보아 원광석은 울산광산에서 생산된 자철석이 이용되었을 가능성이 있다. 원광은 저온환원법에 의해 생산된 괴련철인 것으로 해석되며, 공석온도인 727℃ 부근에서 성형이 이루어진 것으로 판단된다.
        1387.
        2007.11 KCI 등재 서비스 종료(열람 제한)
        To obtain the risk assessment of hazardous materials in Rehmanniae Radix Preparata, the residual pesticides and heavy metals in samples on the Korea and China are surveyed. Group Ⅰ(BHC-δ, BHC-β, Fenitrothion, Penthoate, Endosulfan-α, Dieldrin, Endosulfan-β and Endosulfan-sulfate), Group Ⅱ(BHC-γ, Aldrin, DDD, DDT-p,p Permethrin and Fenvalerate), Group Ⅲ(BHC-α, Chlorpyrifos, Tolyfluanid, Captan and DDT-o,p) and Group Ⅳ(Quintozene, Vinclozolin, DDE and Chlorfenapyr) could analysed on gas chromatography-ECD for evaluation of residual pesticides. Qualified detection concentration on the GC-ECD are 0.45 ng/g~2.50 ng/g. Group Ⅰ, Group Ⅱ, Group Ⅲ and Group Ⅳ are not detected in Rehmanniae Radix Preparata on the Korea and China. Concentration of As, Cd and Pb in Rehmanniae Radix Preparat. on the Korea are 3.06%, 7.00% and 5.78% for Korea Food & Drug Administration(KFDA). Concentration of As, Cd and Pb in Rehmanniae Radix Preparata. on the China are 5.16%, 5.33% and 6.50% for Korea Food & Drug Administration(KFDA). The hazardous materials in Rehmanniae Radix Preparata on the Korea and China were verified the safety of the residual heavy metals and pesticides compare with Korea Food & Drug Administration (KFDA) advisory level.
        1400.
        2007.09 KCI 등재 서비스 종료(열람 제한)
        강구조물의 고력볼트 마찰접합부에 있어서 마찰면의 부식은 장기적으로 마찰력 감소와 접합부 내력저하를 초래한다. 본 연구는 고력볼트 접합부의 부식을 방지하고 소요 역학적 성질을 만족시키기 위해 접합부의 마찰면에 Zn/Al 금속용사 방청처리 한 고력볼트 접합부를 대상으로 마찰면의 표면처리방법과 피막두께를 주요 변수로 하여 인장시험을 실시하였고, 실험으로 부터 마찰면 표면거칠기와 미끄럼계수를 측정하였다. 무도장 샌드블라스트 처리한 접합부 및 샌드블라스트 처리 후 금속용사를 실시한 볼트 접합부의 미끄럼 계수는 국내 규준의 규정 값과 비교하여 동등 이상의 우수한 미끄럼계수 값을 나타냈다.