식품안전보건지표는 그 활용성이 높아 국외에서는 종합적인 환경보건지표 내 세부영역에서 개발되어 활용되고 있으나, 국내의 경우 환경보건지표와 독자적으로 개발되어 도입단계에 있다. 본 연구에서는 기 개발된 식품안전 보건지표를 활용할 수 있는 방안을 사례연구의 형태로 제시하였다. 본 연구에서 선정하여 제시한 활용방안으로는 지수화를 통한 통합식품안전보건지수 산출, 통합식품안전 보건지수와 이를 구성하는 식품안전보건지표간의 상관성평가, 통합식품안전보건지수와 사회경제적 지위와의 상관성평가가 있다. 지역 내에서 식품안전보건상태의 변화를 나타내는 통합식품안전보건지수I과 해당 년도의 지역별 식품안전보건수준을 나타내는 통합식품안전보건지수II가 산출되었다. 통합식품안전보건지수I은 Campylobacter jejuni, Bacillus cereus, 살모넬라, 원인미상으로 인한 식품매개질환 발생건수, 식품매개 법정감염병 발생률 중 장출혈성 대장균 발생률와 통계적으로 유의한 상관관계가 있었다. 통합식품안전보건지수II는 외국인 비율과 여성 비율이 증가할수록 통계적으로 유의하게 감소하였고, 인구밀도가 증가할 수록 통계적으로 유의하게 증가하였다. 제시된 활용방안을 통해 전반적인 국내 식품안전보건상태와 지역별연도별 식품안전보건상태의 변화원인을 파악할 수 있으며, 식품안전과 관련이 있을 것으로 예상되는 기타 요인과의 연관성을 분석하여 추가적인 추론을 할 수 있다. 이 외에도 식품안전보건지표는 다양한 방면으로 활용이 가능하고, 정책적 기준 설정 및 방향성 제시의 근거자료로도 활용할 수 있으므로 향후 더욱 활발한 연구와 지속적인 관심이 필요하다.
본 연구는 국내 식품안전보건지표의 개발과정을 정립하기위해 수행되었다. 이를 위해 국내 식품안전보건지표의 개발과정을 제안하고, 제안된 과정에 대해 시뮬레이션을 함으로서 타당성 검사를 실시하고, 개발된 지표의 활용방안을 제시하였다. 국내 식품안전보건지표 개발과정은 국내환경보건지표 개발과정을 주로 참고하여 설계되었으며, DPSEEA 모형을 적용하였다. 제안된 식품안전보건지표를 개발과정은 크게 개발단계와 운용단계로 나뉜다. 개발단계는 초기지표 제안, 후보지표 선정, 자료 현황 조사, 실행가능성 평가, 파일럿 스터디, 최종 지표 선정의 6단계로 구성되며, 운용단계는 주기적인 지표의 산출과 공표로 구성된다. 개발의 6개 단계는 전반적인 식품안전보건지표 개발을 총괄하는 Task Force팀과 각 개발 단계에서 제안된 지표를 검토 및 평가하는 자문위원회(최소 학계 4명, 연구계 2명, 식약처 관련부서 전문가 4명)의 단계적 역할분배를 통해 운영되도록 하였다. 제안된 과정의 타당성검토를 위해 시뮬레이션을 시행한 결과 제안된 45개의 초기지표중 최종적으로 4개의 지표(세부지표 17개)가 선정되었다: ‘국산 과일·채소류 내 잔류농약/제초제 잔류랑 적합판정비율’, ‘식품매개질환사고(outbreak) 발생 수’, ‘식품매개(food-borne) 법정전염병의 발생률’, ‘살모넬라 식중독(Salmonellosis) 발생률’. 선정된 지표는 지수화를 통해 효과적으로 활용될 수 있다. 2010~2012년의 지표를 토대로 비율차를 적용한 통합식품안전보건지수를 산출한 결과 2010년 대비 2011년, 2011년 대비 2012년의 통합식품안전 보건지수로 10.37과 9.87이 산출되었다. 이는 식품안전보건상태가 2010년에 비하여 2011년에 10.37%, 2011년에 비해 2012년에 9.87% 호전되었음을 의미한다. 또한, 개별지표의 변화를 살펴봄으로서 변화율에 기여도가 큰 지표를 파악할 수 있으며, 통합식품안전보건지수를 도식화함으로서 대중과 정책입안자의 이해를 높일 수 있다. 이와 같이 식품안전보건지표는 다방면으로 효율적으로 활용될 수 있기 때문에 앞으로 더욱 큰 관심과 함께 법안의 제정과 활발한 연구가 필요하다.
The primary purpose of present study, to take appropriate measures to prevent occupational accidents in the food service industry, was to evaluate characteristics of working condition and occupational safety and health. In order to fulfill our objective, profession and working environment, safety recognition and education, safety activities, physical conditions and accident experience were surveyed. To collect information and opinion in the field, face-to-face interviews were, using a structured questionnaire, carried out. Also, food service industry's accidents reported by Korean Occupational Safety and Health Agency at 2014 were statistically analyzed. In the resulting of analyzing data from a questionnaire survey of food service industry employees, safety/health train and management were increased.
Recently, the Ministry of Labour, published clause 2 of Article 41 (Risk Assessment) of the Act "Industrial Safety and Health" dated 12 June 2013 in connection with continuous increase of accidents at construction sites in order to prevent accidents in industrial safety and health in new construction in accordance with the risk assessment on construction projects are realized after March 13, 2014.
In this paper, positive method of calculating risk discussed by performing research the awareness of general contractors and sub-contractors with presenting risky situation is considered. The purpose will be a positive method of calculating risk and would be a sufficient basе and give a positive direction in the development of new systems currently working in the construction and risk assessment which consider the characteristics of sufficient risk assessment system for future research.
The study is conducted in order to establish validity of industrial safety field's neo-qualification composition by suggesting reengineering procedure of NCS based industrial safety field's qualifying occupational plan.
The study is conducted in order to establish validity of industrial safety field's neo-qualification composition by suggesting reengineering procedure of NCS based industrial safety field's qualifying occupational plan.
NCS based neo-qualification plan is deveopled into progress as following steps; First, planning NCS neo-qualification system. Second, presenting work·education combined program certification standard. Third, developing NCS based neo-qualification assessment standard. Fourth, developing work·education qualification prototype problem. The process of qualification plan was composed with Worksheet 14 and with 4phase being completing summary of each section, certification and development of assessment standard, and development of prototype problem. As a result, Industrial safety manager was redesigned into Industrial sfety manager and Construction Safety Manager, and Occupational Health Care Manager was redesigned into Occupational Health Care Manager and Industrial Health Manager. This study, in conclusion, suggests development of qualifying occupation that could be applied to the integrated management system and development of future industrial safety field's specialized neo-qualifying occupation.
The study conducted questionnaire analysis to 413 industrial safety field employees in order to examine the necessity and validity of industrial safety field's 17th neo-job classification based on National Competency standards(NCS).
As a result, 50.1% of industrial safety management field and 43.3% of industrial health management field answered that classification details of occupational safety and health management field are classified by job(duty) performance. Industrial safety management field recognizes that management and engineering section play a significant role in their work, while industrial health management field recognizes worker's health care and work environment management and overall control of work environment assessment to be significant in their work. Furthermore, industrial safety management field recognizes that separating qualification and foundation of 'construction safety manager', 'chemicals(safety and health) manager', '(toxic)risk assessment evaluator or risk factor manager' to be highly significant. The study is meaningful in that it suggests industrial safety field's qualification items practical in industrial sites
This study was designed to investigate dietary life related to sodium of participants in hypertension and diabetes preventive education at the public health center located in Incheon Metropolitan City. Subjects were comprised of 301 adults (males: 102, female: 199) of age 50 years and above. The questionnaire for dietary life and salty taste assessment were performed on the subjects. Data were analyzed using SPSS package (ver. 18.0). According to the result of questionnaire for dietary behavior, 70% of the subjects were in the low salt intake group (p<0.001). In the result of questionnaire for dietary frequency, all ages groups were in the low salt intake group (p<0.01). The data of questionnaire for dietary behavior showed that the subjects of age above 75 years preferred salted seafood, soup, and kimchi (p<0.01). The data of questionnaire for dietary frequency showed that the subjects of age between 65 and 74, least chose fried kimchi, noodle, and soybean paste soup with clams (p<0.05), and the healthy adult groups chose kimchi stew, ssam and ssamjang (p<0.05). The score for dietary behavior in male subjects was higher than female subjects (p<0.01). In particular, the score for dietary frequency was the lowest in the subjects of age between 65 and 74 (p<0.01). The mean value of salty taste assessment in the subjects was 0.41% which is higher than the ideal value of 0.3% (p<0.01). Offering more nutrition education and continuous feedback of healthcare center may be needed to improve the health status of the adults.
Notwithstanding the existence of The Act on the Establishment of Safe Laboratory Environment to prevent accidents in laboratory, it has not been secured substantive level of safety. Moreover, it is hard to apply to the scope of responsibility when the accident occurs in laboratory with The Occupational Safety and Health(OSH) Act. Thus, it is necessary to review and compare the OSH Act and The Act on the Establishment of Safe Laboratory Environment to reinforce the safety in laboratory.
Last five years, Occupational injury rate is declining but still a standstill as 2%, if the rate of deaths all people from 2% to 1% in 2013, but decreased as, occupational safety and health in terms industrial accidents yet has a very weak structure in very small Manufacturing workplace. The purpose of this study was to survey a 1:1 directly person interviews with a structured questionnaire intended for 150 a very small manufacturing workplace. In the results, working with non-regular(informal) workers is one in 10 persons 11.7% and female workers is about three people on 10 persons with 31.0%, and that 75% of non-regular workers who are mainly engaged in the production line appeared. And the work-related injury and accident experience was 4.0% and the occupational injury rate was 1.24%, especially occupational injury rate of older workers was 3.65%, a female workers 1.72%. Workplace risk assessment carried out in response that it was very low as 9.3% of the total. In the technology and funding programs that are supported by the government, was highest with 62.7% of the clean support program awareness, awareness of the rest of the programs is about 10-14% lower. And the satisfaction of supporting a clean support program were the highest 81.3%.
정신보건서비스의 궁극적 목적은 이용자의 삶의 질 향상이라고 할 수 있다. 본 연구는 수정낙인이론에 근거하여 정신장애인의 삶의 질에 지속적으로 부정적 결과를 초래할 수 있는 낙인이 자아존중감을 매개하여 삶의 질에 어떠한 영향 관계를 갖는지를 검증하는 데 그 목적을 둔다. 특히 이러한 경로 과정이 주요한 정신보건세팅인 정신보건센터, 정신요양시설, 사회복귀시설 내에서 어떠한 차이가 나타나는지를 비교․분석하여 조직 형태별로 사회 복지적 개입방안의 차별성을 찾고자 하였다. 조사대상은 총 563명의 정신장애인이며, 정신보건센터 233명, 사회복귀시설 142명, 정신요양시설 188명이 최종 분석에 포함되 었다. 주요연구결과는 첫째, 공동 구조방정식모형 분석에서는 치료진의 지지가 높을수록 낙인지각이 높았다. 둘째, 타인의 지지 나 가족의 지지가 높을수록 자존감이 높아지고 삶의 질도 높아진 것으로 나타났다. 셋째, 자기비하감이나 낙인지각이 높을수록 삶의 질은 떨어졌다. 끝으로, 다중집단분석을 통해 삶의 질을 설명하는 변수들 간의 경로가 세 집단에서 차이가 있는 것으로 나타났다.
The purpose of this study is to identify the overall occupational safety and health status and the characteristics of the workers engaged in the field of the film and television artists, and to take appropriate measures to prevent industrial accidents, profession and working environment, safety recognition and education, safety activities, accident experience, and job stress survey. Survey using a structured questionnaire is to be used for 302 worker directly interview research. Safety awareness level of himself or herself was "middle level" of 3.1 points. Those of colleagues and the general public were evaluated to be low as 2.8 points and 2.5 points, respectively. During the last 12 months, 4.6% of total workers have received an industrial safety health education for work-related accident or disease. Regarding cases of having experienced work-related accident or having been exposed to work-related disease over the past 1 year, 20.2% of total respondents have experienced accident. 16.2% of total respondents have experienced work-related disease. And the workers are approximately one's own subjective feeling of physical symptoms that have appeared. In addition, the film sector workers in particular occupations men than women have higher job stress. Preventive education for industrial safety is required to be expanded and strengthened. Safety education is urgently required in order to prevent, and to reduce accident. Safety and health guideline is required to be developed and disseminated in order to prevent accident in advance. Finally, the actor and their staff members to reduce the stress, mental health care and education carefully needs to be in parallel. Also, when taking measures to reinforce safe work environment, it needs to be protected.
The occupational health and safety accidents were continuously increased during handling, usage and manufacturing the chemical materials according to increase of small and medium sized enterprises in domestic industries. These accidents mainly resulted from insufficient occupational health and safety management and deteriorative facilities and focused on corresponding operation to minimize the damage of accidents after occurrence. But, it was required that we grasped the occurrence causes of occupational health and safety risk in handling, usage and manufacturing the chemical materials and develop the adequate corresponding operation and system according to the possible occurrence of occupational health and safety risk. This study deals with the development of risk assessment model to derive the risk and important risk of occupational health and safety and then help to construct the self-controlled occupational health and safety system for small and medium sized enterprises handling the chemical materials.
In this study, based on the international standard the quantitative assessment model for the level of safety, health and environment was developed. As a result of applying this model, the company(workplace) which has established improvement plan based on quantitative assessment of short-term and long-term requirements, and implemented it was acquired more higher level of safety, health and environment by more than the existing ones.
The occupational injury and illness(OII) was influenced by the various factors. This study was planned to investigate the pathway of the activities of OSHM on the rate of OII via worker's participation. The survey on the trend of the activities of OSHM was used. The sample size of manufacturing industry was 3,000 enterprises and that of construction was 1,000 enterprises. The survey was done by interview method with structure questionnaire. Questions about the activities of OHSM were integrated into one category using factor analysis. The enterprises with OII has more activities of OSHM than that without OII. Among enterprises with OII, the level of the activities of OSHM was positively correlated with the rate of OII. The activities of OSHM has influenced on the rate of OII directly and indirectly via worker's participation and the activities of prevention of accident. Worker's participation also has the direct effect and indirect effect on the rate of OII. Worker's participation in construction sector has more effect on OII than that in manufacturing sector.
The purpose of this study is to investigate the problem on safety and health training system in Occupational Safety and Health Act(OSHA) and to find countermeasures to improve it in the construction industry. The questionary survey was done on aiming at tracing the legal drawbacks of safety and health training system. The questionary was prepared to target on site workers, management supervisors, and safety supervisors in various construction sites. After analyzing the answers from the survey, realistic and optimal countermeasures on derived problems were proposed. These should be included on the next revision of OSHA.