For economic evaluation of integrated operation to sewage facilities, benefit-cost analysis was performed to watershed sewage works project in 7 watershed areas, 156 facilities. In this study, the cost before and after integrated operation was compared and benefits are calculated from the reduction of operators, increasement treated pollution loads, reduction cost through operation convenience, reduction water consumption through effluent reuse, and improvement of life benefit. The result showed that cost was 8,500million won and benefit was 16,747million won, so benefit was 49% higher than cost. B/C analysis result showed that B/C ratio was 1.97 and it is similar to other researches. The benefits of integrated operation included convenience of data management, increase of emergency response, decrease of complains with sewage which was not reflected numerically, so the benefits of integrated operation were expected much greater than this result.

The past five years, industrial accidents due to food processing machinery have been occurred 725 cases, injury by the food cutter occurred 390 cases in its. On this study, to prevent food cutter injury, an attempt is made to present the improved documentation of fundamental safety of the food cutter workplace through the injury analysis of food cutter injury and surveys on band saw machine business field. Analyzing the result of 390 cases on food cutter injury, amputation, cut, puncture occupied 75.1 percent (293 cases), compressed occupied 23.3% (91 cases), also it showed constant component without reference to gender, age, scale of work place, service period. In the survey, lack of concentration for workers have been pointed out as the biggest factor in the cause of band saw machine injury. Meanwhile, such as the EU and Japan, whereas presents safety standards about band saw machines that are tailored to each country, on the other hand, South Korea doesn't provide the standards. To prevent the food cutter injury, safety standards need to be established in consideration of amputation, cut, puncture, compressed injury and financial support is required to procure protective equipment at each place of business.

In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, fatality rate per 10,000 persons by the mobiles cranes was 0.57 in 2011. Second, the in-depth analysis of the mobile crane accidents showed that the main factors of the accidents were the overturn of mobile crane, the fracture of connection part between mobile crane boom and rope, the breaking of rope and the misunderstanding over the signal between a mobile crane driver and workers around a mobile crane. Third, the order of high defection of connecting parts was bucket bolt, bracket and extension parts. Fourth, since there were several cases of overturn of mobile crane by itself in the in-depth analysis of the mobile crane, the over slop-proof device was proposed as the main alternative in this study. Fifth, the revision of standards of safety factor that shall be more than 10, of connecting parts of mobile crane was proposed.

This paper presents the applicability of natural zeolite (Clinoptilolite) for recovery of ammonium nitrogen from high-strength wastewater stream. Isotherm experiments showed the ammonium exchange Clinoptilolite followed Freundlich isotherm and its maximum exchange capacity was 18.13 mg NH4+-N/g zeolite. The X-ray photoelectron spectroscopy (XPS) analysis indicated that a significant amount of nitrogen was adsorbed to the Clinoptilolite. Optimal flowrate for recovery of high concentration ammonium nitrogen was determined at 16 BV/d (=19.2 L/min) throughout the lab-scale column studies operated under various flowrate conditions. This study also provided a method to determine the recovery rate of final product of nitrogen fertilizer based on the model application to the lab-scale continuous data.

Last five years, Occupational injury rate is declining but still a standstill as 2%, if the rate of deaths all people from 2% to 1% in 2013, but decreased as, occupational safety and health in terms industrial accidents yet has a very weak structure in very small Manufacturing workplace. The purpose of this study was to survey a 1:1 directly person interviews with a structured questionnaire intended for 150 a very small manufacturing workplace. In the results, working with non-regular(informal) workers is one in 10 persons 11.7% and female workers is about three people on 10 persons with 31.0%, and that 75% of non-regular workers who are mainly engaged in the production line appeared. And the work-related injury and accident experience was 4.0% and the occupational injury rate was 1.24%, especially occupational injury rate of older workers was 3.65%, a female workers 1.72%. Workplace risk assessment carried out in response that it was very low as 9.3% of the total. In the technology and funding programs that are supported by the government, was highest with 62.7% of the clean support program awareness, awareness of the rest of the programs is about 10-14% lower. And the satisfaction of supporting a clean support program were the highest 81.3%.

The purpose of this study is to identify the overall occupational safety and health status and the characteristics of the workers engaged in the field of the film and television artists, and to take appropriate measures to prevent industrial accidents, profession and working environment, safety recognition and education, safety activities, accident experience, and job stress survey. Survey using a structured questionnaire is to be used for 302 worker directly interview research. Safety awareness level of himself or herself was "middle level" of 3.1 points. Those of colleagues and the general public were evaluated to be low as 2.8 points and 2.5 points, respectively. During the last 12 months, 4.6% of total workers have received an industrial safety health education for work-related accident or disease. Regarding cases of having experienced work-related accident or having been exposed to work-related disease over the past 1 year, 20.2% of total respondents have experienced accident. 16.2% of total respondents have experienced work-related disease. And the workers are approximately one's own subjective feeling of physical symptoms that have appeared. In addition, the film sector workers in particular occupations men than women have higher job stress. Preventive education for industrial safety is required to be expanded and strengthened. Safety education is urgently required in order to prevent, and to reduce accident. Safety and health guideline is required to be developed and disseminated in order to prevent accident in advance. Finally, the actor and their staff members to reduce the stress, mental health care and education carefully needs to be in parallel. Also, when taking measures to reinforce safe work environment, it needs to be protected.

The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

As workplace incidents has been being declining in Korea, there is criticism of the effectiveness of occupational safety policy implementation. It is unknown that which policy target group needs to be targeted to yield effective injuries prevention. The purpose of this paper is to analyze and reveal the policy intervention group with a high priority in terms of industrial incident prevention and the related investment cost. A Policy Priority Model(PPM) is composed of 6 indicators regarding influences of both the incident reduction and the cost reduction. Z-score analyses are used to confirm the high policy priority area or policy target group. Overall, workplace with worker below 50 persons, construction site with the sales of more than a hundred million won, workplace with relatively small percentage of female employees and relatively higher percentage of older worker should be prioritized to reduce workplace injuries. This paper provides an analytic way that can be used to decide the policy priority workplace in order not only to reduce work-related injuries&illnesses and the related investment cost but to further lessen the related societal costs.

The purpose of this study is to grasp foreign worker's industrial safety and health state, which find out the improvement to secure the basic safety net for foreign workers. We have investigated 2,050 workers through direct interviews during the period from April 12, 2010 to May 31, 2010. And the result of analysis, foreign worker's daily average working time is 10.6 hours(40.8% workers in total work 10~12 hours), the extent of exposure to harmful and dangerous working environment is 'the position which cause pain in neck, waist, hands, shoulders, legs'(69.3%), 'repetitive hands and arms movement'(66.1%). It showed 'experience of accident damage or disease related work'(27.3%), 'never apply for industrial accident compensation' is revealed high at 73%. As a result of completing a safety health education for a year, it showed 'never educated'(40.2%), 'the institute that foreign workers have used for help and advice is the foreign worker's support center'(61.9%) Thus, hiring foreign workers in the company are small in site, the environment is too harmful and dangerous. In addition, no safety and health managers, legally blind spot located in the health and safety, because it is an urgent meet for these measures to improve.