본 연구는 대구시 동구 가로수 식재환경 및 생육상태를 조사하여 가로현황을 파악하고 시민들 을 대상으로 설문조사를 실시하여 보다 합리적이며 지속가능한 가로수 계획이 수립될 수 있는 방안에 대해 모색하고자 한다. 현장조사를 통해 식재형식, 생육상태, 관리상태, 가로수 관련 민 원 등 가로환경에 대한 기초자료를 구축하였고, 설문조사를 통해 가로수의 선호하는 특성, 불 만사항, 정책선정 주요 기준, 심의위원회 필요성 등 가로수에 대한 인지도와 만족도에 대해 알 아보았다. 그 결과 2019년 9월 기준 대구시 동구 전역의 가로수는 대구 전체의 약 14%를 차지하 는 약 3만 1천701그루의 가로수가 식재되었고, 동구 가로수에 대한 전반적인 인식에서는 긍정적 으로 나타났다. 선호하는 특성으로는 ‘공해 및 병해에 강한 수종’ 을 선호하였고, 불만사항으로 는 ‘나무 열매로 인한 악취’ 를 선택하였다. 가로수 정책선정의 주요 기준으로는 ‘전문성’, ‘일관 성’, ‘객관성’, ‘주관성’ 순으로 나타났으며, 가로수 관련 심의위원회 필요성에 대해서는 대다수가 ‘필요하다’ 고 응답하였다. 기존의 정책과 계획 수립과정에서 가로수 조성이라는 양적인 계획은 충분히 반영되고 있으나 이후 식재된 가로수에 대한 사후관리는 충분히 고려되지 못하였다. 또 한, 심의위원회의 부재와 기존 정책에서는 지역주민의 의견이 충분히 반영되지 못함을 알 수 있 어 이 또한 추후 개선의 필요성이 있어 보인다. 따라서 본 연구에서는 이를 종합적으로 고려하 여 가로수 조성계획에서부터 관리계획에 이르기까지 지속가능하며 적용 가능한 방안을 제시함 과 동시에 향후 종합적인 가로수 정책의 기초자료를 제공하고자 하는 것에 그 목적이 있다.

농촌진흥청 국립원예특작과학원에서는 2018년 분홍색계 소 형 호접란 ‘Tiny Bell’을 육성하였다. 2010년 진분홍색 다화 성 소형 품종 Phalaenopsis ‘D07PN16’와 연분홍색 소형종 P. ‘D03PN22’를 모본과 부본으로 교배하였다. 2014년 생육이 우 수하고 화색, 화형, 꽃대수 등 개화 특성이 우수한 ‘10531-53’ 개체를 선발하여 기내 화경배양을 통해 증식하였다. 2014년부 터 2018년까지 1차, 2차특성검정을 통해 품종의 안정성과 균 일성을 확인한 후 ‘Tiny Bell’로 명명하였다. 이 품종은 밝은 보라빛 분홍색(RHS, PVGN80A)을 띄며, 가장자리에 백색무늬 를 가지는 것이 특징이다. 평피기 형태의 꽃은 길이와 폭이 각각 3.89, 4.01cm이며, 총상화서로 분지가 발생한다. 1개의 꽃대에 19.7개의 소화가 착생하여 꽃 수가 많이 달리는 다화 성이며, 꽃대 길이는 28.48cm정도이다. ‘Tiny Bell’은 생육시 잎이 수평으로 자라며 길이와 폭은 각각 13.1cm, 5.3cm였다. 신품종인 ‘Tiny Bell’은 소형 분화용으로 이용 가능할 것이다.

Generally the non-bearing walls in apartment buildings in Korea are not considered as a lateral force resisting members for the design consideration. This engineering practice caused large crack damages and brittle fractures of the non-bearing walls when subjected to Pohang earthquakes in 2017 since those have not been designed for seismic loading. In this study, finite element analysis was conducted for slot type non-bearing wall connection system to reduce damages and concentrate damages to the designated damping device through separation from the structural wall members. Steel plate and dowel bar systems designed for the dissipation of seismic energies were modeled and analyzed to investigate the damage reductions. Finally, the test result and the analysis result were compared and verified.

The performance enhancement of various damping systems from natural hazards has become an highly important issue in engineering field. In this paper, ENTA hysteretic dampers were tested under cyclic loadings to evaluate their performance in terms of ductility and energy dissipation. The test results showed that the hysteretic dampers are effective damping systems to enhance the buildings performance for remodeling and retrofit of buildings. Also, the hysteretic dampers were modeled in FEM(Finite Element Method) structural analysis program. As comparing the computer modeling and the experiment, this study model reflects the nonlinear behavior of steel and derives the hysteresis loop.

농촌진흥청 국립원예특작과학원에서는 2017년 빅립 형태의 분홍색계 팔레놉시스 ‘Lovely Angel’을 개발하였다. 2009년 백색 팔레놉시스 P. ‘Timonthy’와 빅립을 가지는 분홍색 P. World Class ‘Big Foot’을 모본과 부본으로 교배하였다. 2013년 생육이 우수하고 화색, 화형, 꽃대수 등 개화 특성이 우수한 ‘09056-12’를 개체선발하여 기내 화경배양을 통해 증식하였다. 2014년부터 2017년에거쳐 1차, 2차 특성검정을 통해 품종의 안정성과 균일성을 확인하여 ‘Lovely Angel’을 육성하였다. 이 품종은 밝고 선명한 보라빛 분홍색(RHS, PVG81C)을 띄며, 줄 무늬를 가지고 있고 설판이 큰 빅립 형태가 특징적이다. 안아피는 형태의 꽃은 길이와 폭이 각각 6.1, 5.6cm이며, 1개의 꽃대에 20.6개의 소화가 착생하여 꽃 수가 비교적 많이 달리고, 꽃대 길이는 31.8cm 이다. ‘Lovely Angel’는 생육시 잎은 반하수로 자라며 길이는 18.7cm, 폭은 6.8cm이다. 신품종인 ‘Lovely Angel’은 소형 분화용으로 이용 가능할 것이다.

The purpose of this paper is to find out how each districts(Gu) of Seoul are related based on the apartment price trends. All the data used in this paper comes from a public data sources, Seoul apartments transaction data provided by ‘Ministry of Land Infrastructure and Transport Korea’ and the apartments properties from NAVER’s real estate service. To analyze the similarities between the price trends of each apartments, this study uses FastDTW algorithm which is quite popular in time series analysis domain. After figured out the distance matrix from FastDTW, this study uses Hierarchical Clustering algorithm and Chi-squared test to compare each districts’ relationship. The analysis result shows that which districts in Seoul are similar and which districts are not.

The past five years, industrial accidents due to food processing machinery have been occurred 725 cases, injury by the food cutter occurred 390 cases in its. On this study, to prevent food cutter injury, an attempt is made to present the improved documentation of fundamental safety of the food cutter workplace through the injury analysis of food cutter injury and surveys on band saw machine business field. Analyzing the result of 390 cases on food cutter injury, amputation, cut, puncture occupied 75.1 percent (293 cases), compressed occupied 23.3% (91 cases), also it showed constant component without reference to gender, age, scale of work place, service period. In the survey, lack of concentration for workers have been pointed out as the biggest factor in the cause of band saw machine injury. Meanwhile, such as the EU and Japan, whereas presents safety standards about band saw machines that are tailored to each country, on the other hand, South Korea doesn't provide the standards. To prevent the food cutter injury, safety standards need to be established in consideration of amputation, cut, puncture, compressed injury and financial support is required to procure protective equipment at each place of business.

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

A survey was conducted to investigate the attitudes of the food specialist to the food developed by gene recombination. The mail survey was distributed to 1,400 food specialists and received 464, a response rate of 33.1%. Respondents were asked about knowledge, concerns of potential hazards, purchasing and labeling of the gene recombination foods. Most respondents (98.7%) have some knowledge on the gene recombination foods. 91.3% of respondents recognized necessity of gene recombination technology. However, they also point out its potential hazards (80.9%). The groups with less knowledge showed their increased worry on the hazard in comparison with ones of having more knowledge(p$lt;0.01). The result indicated that there was negative relationship between knowledge and worry on the gene recombination foods. The groups with more knowledge showed their increased purchasing on gene recombination foods in comparison with ones of having less knowledge(p$lt;0.01). The result indicated that there was positive relationship between their purchase intent for gene recombination foods and knowledge. 68.4% of respondents showed their interest on purchasing the gene recombination foods. In this group, most of them (44.9%) has on condition that low cost (27.0%). In addition, they also have not use the foods for their children (17.9%) if they buy it. Most respondents (85.3%) want labeling on the gene recombination foods.

A survey was conducted to investigate the attitudes of public officials related to food hygiene toward food safety. The official groups were divided into four sub-groups based on their area, agency, gender and age. Response of each group to the survey was statistically analysed. The survey's results showed that most of them (87.0%) were satisfied with a domestic level of food hygiene. But, some of them (29.8%) considered unsatisfactoryly on safety of the food they eat. Their response to food safety did not statistically significant between each group of area, agency and age but, in case of gender, female group showed stastically more negative attitude to food safety than male one (P$lt;0.05). All groups chose residues of chemical substances such as pesticides and food additives as the most potential food risk factor followed by foodborne pathogens, heavy metals and animal drug residues. The results are not consistent with the scientific judgement. Therefore, more education and information were needed for these groups. They pointed out food manufacturer as a responsible group for poor food hygiene (48.7%). In addition, food manufacture and processing were selected as main business types with the lowest level in the food hygiene but official, working in the area of the central government and Seoul metropolitan city, pointed out food services establishments as the poorest hygiene one (P$lt;0.01). This result suggested that education and information to let mind of responded groups change, working in this part, and governmental financial support are needed to improve hygiene level of food manufacture and processing (70.3%). They also chose HACCP as the most effective way for improving the level of food hygiene followed by Recall, PL (Product Liability), monitoring, labeling and increasing of number of company with good manufacture and processing (GMP).

예인줄을 여러 개의 유한요소로 분할 한 뒤 각 요소들에 Newton의 운동 제 2법칙을 적용하고 각각에 작용하는 외력은 성분별로 장력, 항력, Coriolis 힘, 중력, 부력, 입수 충격력 등으로 구분하여 예선과 부선을 연결하는 예인줄의 동역학 모델을 정립하였다. 일반적으로 예인줄 요소의 병진 운동만을 고려하는 이전의 연구들과는 달리 본 논문에서는 예인줄 요소의 운동을 횡동요를 제외한 5자유도로 확장하고 외력 고려가 용이한 물체고정좌표계에서 기술하였다. 예인줄 요소들 간에는 연결점에서 인장만 되는 스프링과 감쇠기로 연결하고, 스프링의 강성계수는 실제 적용되는 예인줄의 강성계수와 등가가 되도록 설정하였다. 정립된 예인줄 모델의 검증을 위하여 예인줄의 공기중 및 수면 바로 위에서의 자유낙하, 예인선의 가속운동, 예인선의 조화운동 시나리오에 대하여 시뮬레이션을 수행하였다. 시뮬레이션 결과, 예인선, 부선, 예인줄 요소들의 운동 시계열 값들은 실제 예상치와 유사한 경향을 보이는 것을 확인하였다.

To investigate the chemical characteristics of PM2.5 in Seoul, Korea, atmospheric particulate matters were collected using a PM10 dichotomous sampler including PM10 and PM2.5 inlet during the period of October 2000 to September 2001. The Inductively Coupled Plasma-Mass Spectromety (ICP-MS), Ion Chromatography (IC) methods were used to determine the concentration of both metal and ionic species. A statistical analysis was performed for the heavy metals data set using a principal component analysis (PCA) to derived important factors inherent in the interactions among the variables. The mean concentrations of ambient PM2.5 and PM10 were 24.47 and 45.27 ㎍/㎥, respectively. PM2.5 masses also showed temporal variations both yearly and seasonally. The ratios of PM2.5/PM10 was 0.54, which similar to the value of 0.60 in North America. Soil-related chemical components (such as Al, Ca, Fe, Si, and Mn) were abundant in PM10, while anthropogenic components (such as As, Cd, Cr, V, Zn and Pb) were abundant in PM2.5. Total water soluble ions constituted 30～50 % of PM2.5 mass, and sulfate, nitrate and ammonium were main components in water soluble ions. Reactive forms of NH4+ were considered as NH4NO3 and (NH4)2SO4 during the sampling periods. In the results of PCA for PM2.5, we identified three principal components. Major contribution to PM2.5 seemed to be soil, oil combustion, unidentified source. Further study, the detailed interpretation of these data will need efforts in order to identify emission sources.

Lipoxygenase가 결여된 진품콩(Lx1Lx1lx2lx2lx3lx3), 진품콩 2호(lx1lx1lx2lx2lx3lx3)와 L-1, L-2, L-3이 모두 존재하는 태광콩(Lx1Lx1Lx2Lx2Lx3Lx3)에 대한 종실특성과 인위노화 처리가 종실의 발아율에 미치는 영향을 알아보기 위하여 실시하였다. 1. 종피균열도는 3품종 모두 파종시기가 늦어짐에 따라 감소하였으며, 진품콩과 진품콩 2호가 태광콩보다 높았다. 2. 파쇄성과 경도는 진품콩과 진품콩 2호가 태광콩보다 낮아지는 경향을 나타내었다. 3. 발아율은 진품콩과 진품콩 2호가 태광콩보다 낮았고, 전기전도도는 인위노화 처리전보다 증가하였으며 태광콩, 진품콩, 진품콩 2호 순으로 높았다. 4. 발아율은 인위노화 처리기간이 길어짐에 따라 진품콩과 진품콩 2호가 태광콩보다 낮았으며, 전기전도도는 인위노화 처리기간이 길어짐에 따라 증가하였으며 진품콩과 진품콩 2호가 태광콩보다 높게 나타났다. 인위노화 처리 35일째는 태광콩과 진품콩이 비슷하게 나타났으며, 진품콩 2호는 태광콩과 진품콩보다 높게 나타났다. 5. 종피균열도는 발아율 및 인위노화 처리 후 발아율과는 유의적인 부의 상관을 나타내었다.