유한요소해석을 통하여，지중 매설된 GFRP 관로의 거동과 좌굴안정성을 분석하였 다. GFRP 관로에 토압과 차량하 중과 같은 외압만이 작용하는 경우와，외압과 함께 수압이 내압으로 작용하는 경우에 대해 해 석을 수행하였으며，해석 대상 관로는 현재 생산되는 GFRP 관로로 한정 하고，응력과 변위，좌굴강도를 검토하였다. 또한，관로 연결 플 랜지 의 웅력집중 현상을 저감하기 위하여 형상을 개 선시 킨 플 랜지 에 대해 해석을 수챙하였다. 연결부 목 부위의 최대 웅력을 검토하기 위한 캔틸레버 모델과，지중 매설시의 모델 두 가지 에 대해 해석을 수행하여 웅력을 검토하였다. 해석 결과 지중 매설된 GFRP 관로에 외압이 작용하는 경우와 좌굴에 대해서는 안전하였으며，개선된 플랜지의 웅력 집중도 상당히 저감되었음을 확인 할 수 있었다.

본 논문에서는 쪽을 이용한 천연염색에서 염색의 횟수에 따른 발색 재현 기술을 개발함으로써 반복 염색에 따른 발색 시뮬레이터의 개발에 기여하고자 한다. 천연염료로는 쪽을 사용하였고 염색의 매질로는 닥원료를 사용하였다. 닥원료를 1회에서 70회까지 반복하여 염색한 닥죽을 만들고 이를 제지하여 천연염색된 감지(紺紙)를 제작하였다. 원지로부터 반복 염색된 감지의 발색을 재현하기 위하여 주성분 분석법을 이용하였다. 주성분 분석을 위해 모집단으로는 멘셀색시료를 사용하였으며 RGB카메라를 고려하여 3개의 기저함수로 부터 직물의 분광반사율을 모델링하였다. 그리고 닥원료로 만든 원지(原紙)와 염색된 감지의 분광반사율을 기저함수의 선형조합으로 표현하고 이로부터 염색횟수에 따른 감지의 분광 반사율의 변화를 예측하기 위한 감쇄함수를 구하는 방법을 제안하였다. 제안된 방법의 성능평가를 위해 염색 횟수별로 실제 염색한 감지와 원지로 부터 예측한 영상을 비교하고 정량적인 색차평가를 수행하였다. 결과 반복 염색시 재현성이 일정하다는 가정에서 색차 1미만의 범위에서 천연염색에 따른 감지의 발색을 재현 할 수 있음을 확인하였다.

충북지역에서 수집한 야생 팽나무버섯의 식품소재로의 가능성을 조사하기 위해 동결 건조한 후 일반성분 및 전자공여능, 총폴리페놀 함량, ACE 저해도와 α-glucosidase 저해도등 생리활성을 분석하였다. 대조군으로 갈뫼팽이버섯과 4종의 수집 야생 팽나무버섯의 일반성분은 건물중으로 분석하였으며, 조단백질은 17.1~21.3 g/100g, 조지방은 4.1~4.9 g/100g, 탄수화물은 65.9~70.5 g/100g, 조섬유는 7.9~18.1 g/100g, 조회분은 5.7~8.4g/100g 범위를 나타내었다. 전자공여능은 63.35~69.31%로 시료간 큰 차이가 없는 것으로 나타났으며, 총폴리페놀 함량은 9.83에서 11.14 mg/g로 대조구와 유사하였다. ACE 저해도는 대조구인 갈뫼 팽이버섯과 수집종인 CBMFV-02가 각각72.91%, 71.44%로 높은 값을 나타내었으며, α-glucosidase 저해도는 CBMFV-01이 46.55%로 가장 높은 값을 나타내었다.

In order to classify odors that are in the air at the specific place and at the specific period, it is necessary to generate representative patterns for each odor sources. In this study, in order to classify the various odors efficiently, the k-mean clustering algorithm was applied to the experimental data. Considering the mixed air with various odors, the representative patterns for odor sources were generated with the combination of two or three different odors. As a result, an acquired odor sample could be discriminated and hence its source can be traced by the proposed clustering method, in this study. The results of this study will be useful for settling the civil complaint related odor.

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including H2, O2, N2 and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

Mail centers are essential postal facilities that sort and dispatch postal items, and should be operated efficiently to provide customers high quality postal services. So the efficiency analysis of mail centers should be performed in order to induce bette

In this study, the calibration characteristics of six new odorant VOCs along with two reference compound were evaluated based on GC-MS (SIM). For the proper evaluation of the GC/MS method, calibration of 7 VOCs were made both by the SPME and direct injection (DI). The minimum detection limit (MDL) of those VOC determined by SPME method fell in the range of 0.31∼0.38 ppb while those of DI from 6.18∼14.3 ppb. The analytical performance of our SPME/GC-MS method was compared against those tested previously by other study groups. Although more efforts are needed to establish the reliability of our SPME/GC-MS method, the method adapted in this study can be recommended as one of the standard methods for the analysis of the target VOCs in this study to settle formal experiment methods.

원자전달 라디칼 중합을 이용하여 poly(styrene sulfonic acid) 47 wt%를 가진 poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(styrene sulfonic acid) (P(VDF-co-CTFE)-g-PSSA) 가지형 공중합체를 합성하였다. 티타늄 아이소프로폭사이드(TTIP)와 가지형 공중합체를 졸-겔 공정을 통하여 TiO2/가지형 공중합체 복합막을 제조하였다. TTIP는 가지형 공중합체의 친수성을 가진 PSSA 영역에만 선택적으로 결합하였으며 그곳에 TiO2 나노 입자가 형성되어 성장하였다. 이와 같은 결과를 적외선과 자외선 분광학으로 확인할 수 있다. 함수량과 이온 교환 능력 (IEC)는 TTIP의 함량에 따라 감소하였고 이것은 막이 가진 술폰산의 수가 감소하기 때문이었다. TTIP가 5 중량%일 때, 막의 기계적 강도는 증가하고 수소이온 전도도도 유지되었다.

A hierarchical computational method has been developed and used with finite element method based on dislocation density multiple-slip crystalline formulation to predict how nanoindentation affects behavior in face-centered cubic crystalline aggregates. Using displacement profiles which were obtained from molecular dynamics(MD) nanoindentation simulation, scaling relations based on indentation depths, grain-sizes, and grain aggregate distributions were obtained. These relations then applied to coarsen grains in micros- tructurally based FE formulation which accounts for dislocation density evolution, crystalline structures. This computational regime was validated with a several experimental results related to single gold crystals. This hierarchical model provides a tool to link nanosacle level with a microstructurally based FEM formulation that can be to ascertain inelastic effects such as dislocation density evolution. With the above certainty temperature distribution during the nanoindentation simulation also was investigated along with the different indentation depth.

This study aimed at investigating the gene expression profile in basal ganglia of hexa-valence chromium exposed rat based on cDNA array analysis. For cDNA array, Sprague-Dawley male rats (300 ± 25 g) were administrated with 15 mg/kg B.W/day of potassium dichromate by gavage (0.3 ml) dissolved in saline for 10 days (n=5). For dose-related gene expression analysis, rats were administrated with 0, 1, 5 mg/kg B.W/day of potassium dichromate for 10 days. Control rats were administrated with equal volume of saline (n=5). For cDNA array analysis, RNA samples were extracted from brain tissue and reverse-transcribed in the presence of [α³²P]-dATP. Membrane sets of the Atlas array II and Toxicology array kits were hybridized with cDNA probe sets. RT-PCR and Northern blot hybridization methods were employed for validation and assessment of the dose-related gene expression profile, respectively. Among the 2352 cDNAs, 43 genes showed significant (>two-fold) changes in expression. 22 genes were up-regulated and 21 genes were down-regulated in the 15 mg/kg B.W/day hexa-valence chromium treated group than control. According to the Northern blot hybridization analysis, heat shock protein 47, neurodegeneration associated protein 1 and pituitary specific growth factor 1a genes were up-regulated, but Gamma-aminobutyl-acid a1 subunit, neuroligin2, brain calcium-transporting plasma membrane type ATPase genes were down-regulated even in the low-dose of hexa-valence chromium exposed group (1 mg/kg B.W/day) than control. Genes that detected in this study may be closely related to the hexa-valence chromium-induced neurotoxicity in the rat basal ganglia and addition study of these genes can give some more useful information about the neuro-toxic mechanism by hexa-valence chromium.