Using a progressive die of the multi-stage drawing product, It was experiments for the Influence of the Products Roundness on the die pad process Safety die model, obstacle countermeasure research safety die design When the die pad is independent structure, Sidewall thickness of the inside 2stage, 3stage, 4stage of the product is thicker, the thickness of the inside 1stage and the bottom is thinner. it was become unstable beacuse the inside 1stage related to the Products Roundness is thinner. When the die pad is Integrated structure, Sidewall thickness of the inside 1stage, 2stage of the product is thicker, and Sidewall 3stage and 4stage was a thin. it was become unstable beacuse the inside 3stage related to the Products Roundness is thinner. Therefore, The appropriate combination of and integrated independent is required for each process.

Internet of Thing(IoT), which is recently talked about with the development of information and communication technology, provides big data to all nodes such as companies and homes, means of transportation etc. by connecting all things with all people through the integrated global network and connecting all actual aspects of economic and social life with Internet of Thing through sensor and software. Defining Internet of Thing, it plays the role of a connector of providing various information required for the decision-making of companies in the cloud computing environment for the Insight usage by collecting and storing Raw Data of the production site through the sensor network and extracting big data in which data is accumulated and Insight through this. In addition, as the industry showing the largest linkage with other root industries among root industries, the mold industry is the core technology for controlling the quality and performance of the final product and realizing the commercialization of new industry such as new growth power industry etc. Recently, awareness on the mold industry is changing from the structure of being labor-intensive, relying on the experience of production workers and repeating modification without the concept of cost to technology-intensive, digitization, high intellectualization due to technology combination according to IT convergence. This study, therefore, is to provide a golden opportunity to increase the direct and indirect expected effects in poor management activities of small businesses by actually implementing and managing the entire process of mold life cycle to information system from mold planning to mass production and preservation by building SME(small and medium-sized enterprises)-type mold life cycle management information system in the cloud computing environment and applying it to the production site.

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra9.94 ㎛ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

기계가공으로 인한 사고는 작업자에게 치명적인 경우가 많다. 이러한 사고는 완벽한 가공지그을 통해 대부분 예방이 가능하지만 제품설계초기 후가공과 양산 공정은 고려되지 않고 설계되어 기계가공 시 재해로 연결되는 경우가 빈번히 발생하고 있다. 사형 주조법은 수작업으로 손쉽게 제품을 생산하는 장점을 가지는 반면 치수오차가 다른 양산공정 보다 크다는 단점을 가진다. 이런 사형 주조품을 기계 가공할 때 제품의 치수편차로 인해 불안전한 고정및 과다한 절삭, 제품이탈, 공구파손, 장비와 공구의 빠른 수명감소 등의 다양한 문제가 발생 하지만 사형주조의 특성상 개선하기 어려운 문제로 인식되고 있다. 본 연구에서는 원형의 용기형태의 제품을 사형주조 후 기계가공 하는 것을 금형으로 대체하기 위한 셸몰드법을 제시하고 셸몰드로 만든 셸주형으로 주조함으로서 표면조도 평균 Ra9.94㎛의 기계가공에 준하는 표면을 구현하였다. 외형의 정밀한 제품을 대량 생산하여 가공공정의 간소화 및 평균 두께 편차를 줄임으로서 제품파손 및 제작 시 발생할 수 있는 안전사고예방에 긍정적인 영향을 주었다. 기계가공전 제품의 치수정밀도를 높여 안전성, 생산성향상, 가공 공정단축, 환경개선 등을 이 가능함을 확인하였다.

The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms, the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand to enter with inside of the press die, therefore, basic countermeasure is the safety press. In order to prevent access to mechanical moving part by the hand or any part of the body, it is important to making a safety die design Structurally. It presents the design of the safety press die with suitable structure in the Product's attribute which it had shown in samples, There is a possibility of being difficult because the attribute of safety die design that had present all the productions from research does not agree each other. but because the representative process which is used most at sample had designed, If you were imitates with safety die design base which is presented from this research, It comes to be thought to be the part which can are used at the various sides.

As enterprises, based on the forecast of the customer's demand and collaboration with the suppliers, establish the integrated system directing supply, production, and distribution for the increase of productivity, Thus, this study intends to find the most urgent and critical factors for the improvement of the information system by externalizing factors affecting the operation of information system, suggest the process to improve the relevant functions of information system, and design the process. As a result of the analysis of the previous studies on the improvement of the information system, many studies were conducted on the improvement of ERP and SCM, yet there was no study conducted targeting about APS (Advanced Planning & Scheduling). Thus, this study chose APS as the subject for the design of the process for the improvement for the information system.

Workers in logistics centers also are exposed to serious musculoskeletal disorders the same as workers in general manufacturing due to operating forklifts and other labor duties. The frequency of these work related injuries decreases, workers' job satisfaction In addition, it causes many employees questioning a job change, which is regarded as the primary factor which drops the productivity. In this paper, we conducted a survey ti perceive the correlation between work related injuries in the fields of distribution centers and job satisfaction. Furthermore we made statistical analysis with our findings. The results of our analysis showed that the frequency of work related injuries due to workers' repetitive loading and unloading work is the primary factor which lowers job satisfaction. In order to improve aforementioned problem we propose first of all loading and unloading on pallet basis, second of all automation and computerization of logistics systems, and third of all ensurinf sufficient break time.

Logistics company strives for satisfaction of customer service. the internal clients of corporation, the engineers of driver enhance their thinking about customer orientation by education of important about customer services. the study reached the conclusion that result which analyzed the important fact of enhancing customer orientation strategy by AHP show an ability of dealing with customer improves customer orientation strategy. because the desire of customer is various, it is difficult to have standard of dealing thought, the program of improvement of dealing ability should be developed and trained to improve customer orientation.

we can easily find numerous cases, where the outcomes are not up to their expectations, despite the enormous efforts and investments poured on developing ERP systems. Consequently, we are in need of a new methodology for efficient implementation and Maintenance of an ERP system. Therefore, we have investigated and analyzed various problems that may occur in adopting ERP systems, such as high implementation costs, shortage of professional manpower, and lack of active participation from insiders. In this thesis, we developed a new ERP system, focusing on accounting management modules and benchmarked our proposed model to one of the real companies.

1996년에 네덜란드 마크로, 1998년 밀리오레를 필두로 대형 할인점과 대형 쇼핑몰이 국내에 우후죽순으로 생겨나고 있다. 본 연구에서는 넘쳐나는 국내 유통업시장에서 경쟁력을 가지는 방법을 고객 분류 및 세분화와 고급화 패션화로 보고 연구했다.

It calls for positive consideration of RFID technologies applying to the operation of the optimum VMI system for decreasing safety inventory. Based on the above-said considerations, the present author judges that the introduction of RFID into the consumer goods distribution industry is one of the important issues to be settled in the future. Conclusively, this study proposes that, for the sake of the operation of VMI system, the aforesaid problems should be positively examined and efficient methods promptly developed, so as to reinforce the competitiveness of enterprises.