검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 295

        121.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Generally, in the previous researches, it is found that a water droplet is respectively in Wenzel and Cassie-Baxter states on hydrophilic/hydrophobic rough surfaces. And Wenzel and Cassie-Baxter equations are used to estimate the apparent contact angle on the surfaces. However, difference between measured apparent contact angle and estimated apparent contact angle with the equations is recently reported and new model to estimate apparent contact angle on rough surfaces is proposed. In this study, wetting state and apparent contact angle on the surfaces with micro-pillars should be investigated to find solution of this argument. Using the high resolution microscope, the wetting state of the D.I.water droplet on the surface with micro-pillars was visualized and apparent contact angle of the D.I.water droplet was measured. On the basis of experimental data, the equations to estimate apparent contact angle were verificated and the general wetting characteristics on the surfaces with micro-pillars are finally classified.
        4,000원
        122.
        2013.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 polyvinyl chroride (PVC)와 stainless steel 표면에서 E. coli O157:H7의 부착, 바이오필름형성, 온·습도에 따른 생존율을 조사하고, E. coli O157:H7이 오염된 작업대 표면에서 상추로의 교차오염도 조사를 통하여 E. coli O157:H7에 오염된 작업대가 상추의 미생물학적 안전성에 미치는 영향을 평가하고자 수행하였다. 작업대 표면 재질인 PVC와 stainless steel에 E. coli O157:H7 배양액을 1시간 노출시켰을 때, PVC의 경우, stainless steel 보다 10배 정도 부착력이 높았으나, 6시간째는 두 재질간의 차이가 없었다. 또한, E. coli O157:H7의 바이오필름 형성은 TSB > 10% 상추추출액 > 1% 상추추출액 > phosphate buffer 순이었으며, 재질별로는 PVC에서 바이오필름형성능이 높은 것으로 나타났다. 온도 20oC, 30oC, 습도 43%, 69%, 100% 에서 각각 노출 시켰을 때, E. coli O157:H7은 온도 30oC, 습 도 43%, 69% 조건에서 12시간 내에 약 5.0 log CFU/coupon이 감소한데 반해, 상대습도 100%에서는 농도의 큰 변화 없이 5 일 이상 생존이 지속되었다. 또한, 유기물이 작업대 표면에 존재 시, E. coli O157:H7의 감소 속도가 느렸다. E. coli O157:H7 에 오염된 작업대에 상추를 접촉시키고 상추의 오염도를 조사한 결과, 상추 표면에 수분이 존재할 때 오염된 작업대 표면에서 E. coli O157:H7의 이동수준이 상추에 수분이 없을 때 보다 10 배 이상 증가하는 것으로 나타났다. 따라서 E. coli O157:H7에 오염된 작업대는 상추의 안전성에 직접적인 영향을 미칠 수 있어 작업 후에 세척, 소독을 통하여 위생적으로 관리하는 것이 필요하다.
        4,000원
        123.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Lead (II) ion selective poly(aniline) solid contact electrode based on Tetramethylthiuram monosulfide ionophore as a sulfur containing sensing material is successfully developed. The electrode exhibits good linear response of 25.6 mV / decade (at 20±0.2℃, r2=0.995) within the concentration range of 1.0×10-1~4.0×10-7 M Pb (II). The composition of this electrode was Ionophore : PVC : dioctylphthalate : potassiumtetrakis(4-chlorophenyl)borate : Oleic acid = 5.0 : 20.0 : 25.0 : 4.0 : 5.0. When we consider the results of using different composition electrodes based on only one potassiumtetrakis(4-chlorophenyl)borate or Oleic acid liphophlic additive, poly(aniline) solid contact electrode based on Tetramethylthiuram monosulfide ionophore with potassiumtetrakis(4-chlorophenyl)borate and Oleic acid liphophlic additive had the best result in response characteristics. The electrode shows good selectivity for lead (II) ion in comparison with alkali, alkaline earth, transition and heavy metal ions. This electrode is suitable for use with aqueous solutions of pH 3.0 ~ 7.0 and their standard deviation in the measured emf differences was ±2.94 mV at Tris buffered lead sample solution of 1.0×10-2 M and ±2.82 mV at Tris buffered lead sample solution of 1.0×10-3 M. Their stabilization time was less than 710 s. and response time was less than 16 s.
        4,000원
        125.
        2012.10 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        In semiconductor manufacturing, the circuit integrity of packaged BGA devices is tested by measuring electrical resistance using test sockets. Test sockets have been reported to often fail earlier than the expected life-time due to high contact resistance. This has been attributed to the formation of Sn oxide films on the Au coating layer of the probe pins loaded on the socket. Similar to contact failure, and known as "fretting", this process widely occurs between two conductive surfaces due to the continual rupture and accumulation of oxide films. However, the failure mechanism at the probe pin differs from fretting. In this study, the microstructural processes and formation mechanisms of Sn oxide films developed on the probe pin surface were investigated. Failure analysis was conducted mainly by FIB-FESEM observations, along with EDX, AES, and XRD analyses. Soft and fresh Sn was found to be transferred repeatedly from the solder bump to the Au surface of the probe pins; it was then instantly oxidized to SnO. The SnO2 phase is a more stable natural oxide, but SnO has been proved to grow on Sn thin film at low temperature (< 150˚C). Further oxidation to SnO2 is thought to be limited to 30%. The SnO film grew layer by layer up to 571 nm after testing of 50,500 cycles (1 nm/100 cycle). This resulted in the increase of contact resistance and thus of signal delay between the probe pin and the solder bump.
        4,000원
        126.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 선체 블록의 운반 작업 중 발생하는 동적 하중 및 골리앗 크레인의 와이어 로프(wire rope)와 선체 블록 간의 동적 접촉력을 고려한 최적 러그 배치 시스템을 설계하고, 다물체계 동역학 커널과 외력 계산 커널을 개발하였다. 다 물체계 동역학 커널은 recursive formulation을 이용하여 운동 방정식을 구성하였고, 외력 계산 커널은 비선형 유체 정역학 적 힘, 선형 유체 동역학적 힘, 풍력, 계류력을 계산할 수 있다. 개발된 커널의 효용성을 검증하기 위해, 이를 이용하여 와 이어 로프와 블록간의 간섭과 이때 작용하는 동적 접촉력을 계산하였고, 마지막으로 계산 결과를 반영하여 러그가 부착된 블록에 대한 구조 해석을 수행하였다.
        4,000원
        127.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 직접 접촉식 막증류 공정에서 운전인자에 따른 담수 투과량과 열효율을 예측하기 위해 열 및 물질전달 방정식을 이용하여 1차원 해석모델을 개발하였다. 이 해석모델의 타당성을 검증하기 위해 해석모델 결과와 기존 연구자들에 의해 수행된 실험 결과를 비교하였고 만족할 만한 결과를 얻었다. 이를 통해 DCMD 모듈에서 염수와 증류수의 입구온도 및 입구속도가 담수 투과량 및 열효율에 미치는 영향을 분석하였다. 그 결과 염수의 입구온도와 입구속도가 증류수의 입구온도와 입구속도보다 담수 투과량과 열효율 증가에 미치는 영향이 크기 때문에 지배적인 운전특성이라는 것을 알 수 있었다. 염수의 입구온도가 60℃에서 95℃로 증가할 때 담수 투과량이 21.22kg/m2h에서 71.26kg/m2h로 3.4배 증가하였고 열효율은 0.556에서 0.765로 37.5% 증가하였다. 한편, 염수의 입구속도가 60에서 300 m/h로 증가함에 따라 담수 투과량이 27.91kg/m2h에서 36.33kg/m2h로 30% 증가하였고 열효율은 0.6에서 0.646로 7.5% 증가함을 알 수 있었다.
        4,300원
        128.
        2012.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 석탄 화력발전소의 연소 후 CO2 회수 기술인 알칸올 아민 수용액을 이용한 아민흡수법에서 전체 운전비의 80% 가량을 차지하는 탈거에너지의 저감을 위해 새로운 탈거기술인 분리막을 이용한 감압탈거 기술을 제시하고자 한다. 막의 소재로는 소수성막인 PE (polyethylene)를 지지체로 하고 5mum 두께의 PDMS (polydimethylsiloxane)를 코팅한 복합막을 제조하여 적용하였으며, 흡수액으로 MEA (monoethanolamine) 30 wt% 수용액을 사용하였다. 온도의 변화에 따른 영향을 알아보기 위하여 흡수액 온도를 25~80℃로 변화시켜 이산화탄소의 탈거특성을 살펴보았으며, 흡수용액의 CO2 함량(CO2 loading)에 따른 영향을 고찰하기 위하여 CO2 함량을 변화시켰다. 또한 감압탈거 시 탈거측 압력을 60~360 mmHg(abs.)로 변화시켜 진공도에 따른 탈거특성을 연구하였다. 아민수용액의 온도가 증가할수록, 이산화탄소 부하량이 증가할수록 이산화탄소의 탈거량은 증가하는 경향을 보이고 있으며, 감압이 감소함에 따라 이산화탄소의 탈거량 역시 증가하고 있는 것을 확인하였다. 막의 안정성 실험 결과 PTFE 단일막에 비하여 PDMS-PE 복합막의 경우 감압탈거 막공정에 적용하기 안정한 막이라고 판단된다.
        4,000원
        129.
        2011.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 기공의 크기가 0.4mum의 소수성 막인 폴리에틸렌 100가닥으로 모듈을 제작하여 직접접촉식과 동반기체식 막증류 과정에서 막의 양단의 온도차, 공급수의 염분농도, 그리고 냉각수/동반기체의 유량에 대해서 투과수의 플럭스를 측정하였다. 이론적으로는, 동반기체식 막증류는 직접접촉식 막증류 공정의 막의 투과측 표면과 냉각수 사이에 동반 기체층이 추가된 것으로 간주하였다. 이 동반기체층은 새로운 저항층과과 동반기체의 이동중 상변화된 수증기가 손실되는 것이 투과유속을 30% 정도 감소시키게 된다. 물질수지식을 이용하여, 기존의 식과는 다르게 보정계수(ω)를 넣어 직접접촉식 막증류와 동반기체식 막증류의 이론값을 실험값과 비교 분석하였다.
        4,200원
        130.
        2011.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study was to investigate the effect of high heeled shoes with the total contact insert (TCI) on the frontal plane of the joints for the lower extremity during the gait. Ten healthy females voluntarily participated in this study and the height of the high heeled shoes was 7 cm. A three-dimensional motion analysis system (VICON) and force plates were used to analyze the movements of the joints for the lower extremities. The results were as follows: There were no significant differences for the angle value on the event of the gait cycle in the maximum eversion and inversion of the ankle joint, the varus and valgus of the knee joint, and the adduction and abduction of the hip joint (p>.05). But, there was a significant difference or the range of motion in the ankle joint (p<.05). The value of ankle and knee moment with a TCI was less than the value for no TCI. And there were significant differences for the moment value of the maximum inversion and eversion on the ankle joint and for the maximum varus and valgus on the knee joint (p<.05). Therefore, a TCI would be effective in stabilizing the joints of the lower extremities and increasing the balance of a body to reduce the injure from a fall during the gait.
        4,000원
        131.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        목 적: 단백질 침전물이 콘택트렌즈의 함수율, 산소투과성 및 접촉각에 미치는 영향을 조사하였다. 방 법: Polymacon과 etafilcon A 재질의 소프트콘택트렌즈를 착용기간에 따라 수집하여 단백질 침전물을 추출하고 fluorometer를 이용하여 단백질 침전물을 정량하였다. 사용하지 않은 polymacon과 etafilcon A 콘택트렌즈를 lysozyme과 albumin 단백질이 포함된 인공눈물에 넣어 일정하게 단백질을 부착시키고 부착된 단백질 침전물을 정량한후 중량측정법, 전기분해 자동분석법 및 sessile drop 방법을 사용하여 함수율, 산소투과성 및 접촉각을 측정하여 대조군과 비교하였다. 결 과: Polymacon 재질의 콘택트렌즈에 부착된 단백질 침전물 양은 착용기간에 따라 차이가 없었으나, etafilcon A 재질의 콘택트렌즈는 착용기간에 따라 빠르게 증가하였다. 일정하게 단백질을 부착시킨 소프트 렌즈의 경우 함수율은 polymacon 렌즈와 etafilcon A 렌즈에서 모두 감소하였고, 산소투과성도 polymacon 렌즈와 etafilcon A 렌즈에서 모두 감소하였으며 접촉각은 polymacon 렌즈와 etafilcon A 렌즈에서 모두 증가하였다. 결 론: 소프트콘택트렌즈에 부착된 단백질 침전물은 렌즈의 함수율과 산소투과성을 저하시키고 접촉각을 증가시켜 콘택트렌즈 착용 시 불편감을 유발하는 원인이 될 수 있으며 특히 고함수 이온성 재질인 etafilcon A의 경우 더욱 문제가 될 것으로 사료된다.
        4,300원
        132.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Effect of brine mineral water(BMW) on contact hypersensitivity reaction(CHR) was estimated using trimellitic anhydride (TMA) induced CHR in the mouse. BMW exhibited potent inhibitory activity on TMA induced CHR. BMW treatment suppressed the ear swelling, and attenuated hyper-activated lymph nodes stimulated by TMA challenge, thereby reduced their weight. The immunological index was analyzed after BMW administration in CHR. The level of serum IGE was significantly down regulated after BMW treatment. Furthermore, BMW showed inhibitory property of cytokine production. BMW treatment suppressed not only Th2 type cytokine, IL-4 but also pro-inflammatory cytokines such as TNF-α and IL-6. From the histological analysis, the inflammatory context appeared by atopic dermatitis lesion after challenging with TMA are diminished by BMW treatment. Our results suggest that BMW may attenuate the development of CHR, and can be available for functional ingredient.
        4,000원
        133.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        막증류는 소수성이 강한 0.1 내지 0.5μm의 정밀여과막을 통하여 휘발도가 상대적으로 큰 성분을 증발시켜 분리하는 방법이다. 본 연구에서는 중공사형 분리막을 이용한 직접접촉식 막증류 공정을 "COMSOL Multiphysics" 프로그램을 이용하여 수치해석 하였으며 유체의 유입온도, lumen 및 shell side 공급 유속의 변화로 인한 투과량의 변화를 해석하였다. Lumen 공급용액의 온도가 30 에서 50℃까지 증가할 경우 막증류 투과량은 1.0에서 3.8 L/㎡·hr 까지 증가하였으나 shell 유체온도 영향은 상대적으로 낮았다. 또한 lumen 공급유속에 따른 막증류 투과량과 운전 압력손실을 고려할 경우 0.15 m/s (ReL = 135)일 때 가장 효율적임을 확인하였다.
        4,000원
        134.
        2010.12 구독 인증기관 무료, 개인회원 유료
        본 연구는 대학생들의 일상생활에서의 사회 및 정치에 대한 인식이 대학생들의 정치의식에 미치는 영향을 경험적으로 분석하였다는 것이다. 기존연구와의 차이점은 청소년기의 생활환경의 요소들을 중심으로 이러한 것들이 청소년 정치의식에 미치는 영향을 살펴보았다는 것이다. 본 연구는 2009년 청소년정책연구원에서 조사한 실태자료를 참고하였으며 대학생 1363명을 대상으로 분석한 것이다. 본 연구를 위한 분석방법으로는 SPSS 13.0을 통한 기술통계와 회귀분석을 사용하였으며, 연구결과는 다음과 같다. 첫째, 대학생들의 정치에 대한 관심도는 정치의식에 유의미한 영향을 미칠 가능성이 있다. 둘째, 본인과 형제, 자매, 부모, 이웃과의 사회 정치 대화정도는 청소년 정치의식에 긍정적인 영향을 미칠 수 있다. 셋째, 대학생들의 매체 즉, TV, 라디오, 신문, 잡지, 인터넷 등을 통한 사회 및 정치에 대한 접촉정도는 그들의 정치의식과 유의미한 상관관계가 있을 가능성이 있다. 이러한 결과는 대학생들의 사회 및 정치에 대한 관심 및 담론의 기회를 넓히고, 다양한 매체를 통한 사회 정치의 참여의 경험이 필요하다는 것을 알 수 있게 한다. 또한 실생활을 통한 청소년들의 사회 정치의식에 대한 교육의 접근방법에도 도움이 될 수 있을 것이다.
        4,500원
        135.
        2010.08 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        We studied the influence of different types of metal electrodes on the performance of solution-processed zinc tin oxide (ZTO) thin-film transistors. The ZTO thin-film was obtained by spin-coating the sol-gel solution made from zinc acetate and tin acetate dissolved in 2-methoxyethanol. Various metals, Al, Au, Ag and Cu, were used to make contacts with the solution-deposited ZTO layers by selective deposition through a metal shadow mask. Contact resistance between the metal electrode and the semiconductor was obtained by a transmission line method (TLM). The device based on an Al electrode exhibited superior performance as compared to those based on other metals. Kelvin probe force microscopy (KPFM) allowed us to measure the work function of the oxide semiconductor to understand the variation of the device performance as a function of the types metal electrode. The solution-processed ZTO contained nanopores that resulted from the burnout of the organic species during the annealing. This different surface structure associated with the solution-processed ZTO gave a rise to a different work function value as compared to the vacuum-deposited counterpart. More oxygen could be adsorbed on the nanoporous solution-processed ZTO with large accessible surface areas, which increased its work function. This observation explained why the solution-processed ZTO makes an ohmic contact with the Al electrode.
        4,000원
        136.
        2010.06 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        As an alternative to the W plug used in MOSFETs, a Cu plug with a NiSi contact using Ta / TaN as a diffusion barrier is currently being considered. Conventionally, Ni was first deposited and then NiSi was formed, followed by the barrier and Cu deposition. In this study, Ti was employed as a barrier material and simultaneous formation of the NiSi contact and Cu plug / Ti barrier was attempted. Cu(100 nm) / Ti / Ni(20 nm) with varying Ti thicknesses were deposited on a Si substrate and annealed at 4000˚C for 30 min. For comparison, Cu/Ti/NiSi thin films were also formed by the conventional method. Optical Microscopy (OM), Scanning Probe Microscopy (SPM), X-Ray Diffractometry (XRD), and Auger Electron Microscopy (AES) analysis were performed to characterize the inter-diffusion properties. For a Ti interlayer thicker than 50 nm, the NiSi formation was incomplete, although Cu diffusion was inhibited by the Ti barrier. For a Ti thickness of 20 nm and less, an almost stoichiometric NiSi contact along with the Cu plug and Ti barrier layers was formed. The results were comparable to that formed by the conventional method and showed that this alternative process has potential as a formation process for the Cu plug/Ti barrier/NiSi contact system.
        4,000원
        137.
        2010.04 구독 인증기관 무료, 개인회원 유료
        The users who use the wheelchair are confined to a wheelchair for a long time. Accordingly, the use of seat cushion for pressure distribution is very important in order to prevent a bedsore. Therefore, this paper provides useful information for design of seat cushion through statistical testing among nothing cushion, low cell type of air cushion, high cell type of air cushion, and jelly type of air cushion. It turned out that the jelly type and high cell type of air cushion have a serious effect on decision and design of seat cushion.
        4,000원
        138.
        2010.02 구독 인증기관 무료, 개인회원 유료
        In this study, the performance of powdered activated carbon(PAC) contactor located in the Hakya water treatment plant(WTP) was evaluated. The result of tracer tests showed that the plug flow portion was more than 70 %. According to the total organic carbon(TOC) data of target WTP, there were no clear evidence that the addition of PAC contributed to the removal of organics. However, the results of jar test, conducted with the raw water taken from the Hakya WTP, proved that PAC could remove dissolved organic carbon(DOC) to some extent when the proper velocity gradient was maintained. It was estimated that the production rate of Hakya WTP, defined as the ratio of the operating flow rate to the design flow rate, was only 50 %. Because of this lower production rate, the mixing intensity in the contactor is much less than the designed value and, finally, the performance of PAC contactor was much less than what was expected.
        4,000원
        139.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 청주시 4지 신호교차로의 측면접촉사고를 다루고 있다. 연구의 목적은 측면접촉사고의 특성을 분석하고 관련모형을 개발하는데 있다. 이를 위해 이 연구에서는 적절한 모형의 방법론을 찾는데 중점을 두고 있다.주요 결과는 다음과 같다. 첫째, 측면접촉사고에서 부상사고는 물피사고의 약 2배 이상으로 교차로 내에서 사고가 가장 많이 일어나는 것으로 평가되었다. 아울러 측면접촉사고는 대부분 승용차 관련 사고이며, 안전운행 불이행으로 인한 것으로 분석되었다. 둘째, 다중선형회귀모형이 다중비선형회귀모형보다 통계적으로 유의한 것으로 평가되었다. 또한 최적 모형은 종속변수가 사고건수인 모형으로 분석되었다. 본 연구에서 분석된 측면접촉사고의 요인은 교통량(ADT), 교차로 면적, 우회전 전용차로, 횡단보도 수, 주도로 제한속도, 최대종단경사 및 현시 수이다.
        4,000원