한본 연구에서는, 철근콘크리트 보 구조물의 동결융해에 따른 장기거동특성 및 최종 파괴형태를 비교 분석하고자 하였다. 철근콘크리트 보 시험체와 재료 시험체를 제작하여, 동결융해 챔버를 이용하여 동결과 융해를 반복적으로 수행하였다. 동결융해를 위하여 기존의 시험법을 참고하여 철근콘크리트 구조물에 대한 시험을 수행 하였다. 동결융해에 따른 콘크리트의 재 료특성 변화와 철근콘크리트 보 구조물의 거동특성 변화를 통하여 동결융해에 대한 영향을 평가하였다. 제안된 동결융해 시험법을 통하여 콘크리트 공시체의 압축강도가 약 19%감소하였다. 철근콘크리트 보 시험체의 경우, 콘크리트의 표면 강도가 동결 융해에 의하여 감소되어 사인장 균열이 발생하여, 재료적 강도 감소에 의한 구조물의 성능이 감소함을 확인하였다. 또한, 사인장 균열이 발생한 동결융해 시험체의 에너지 소산능력이 동결융해를 거치지 않은 시험체와 비교하여 적게 발생하였다.

PURPOSES: Nitrogen oxide (NOx) is a particulate matter precursor, which is a harmful gas contributing to air pollution and causes acid rain. The approaching methods for NOx removal from the air are the focus of numerous researchers worldwide. Titanium dioxide (TiO2) and activated carbon are particularly useful materials for NOx removal. The mechanism of NOx elimination by using TiO2 requires sunlight for a photocatalytic reaction, while activated carbon absorbs the NOx particle into the pore itself after contact with the atmosphere. The mixing method of these two materials with concrete, coating, and penetration methods on the surface is an alternative method for NOx removal. However, this mixing method is not as efficient as the coating and penetration methods because the TiO2 and the activated carbon inside the concrete cannot come in contact with sunlight and air, respectively. Hence, the coating and penetration methods may be effective solutions for directly exposing these materials to the environment. However, the coating method requires surface pretreatment, such as milling, prior to securing contact, and this may not satisfy economic considerations. Therefore, this study aims to apply TiO2 and activated carbon on the concrete surface by using the penetration method. METHODS : Surface penetrants, namely silane siloxane and silicate, were used in this study. Photocatalyst TiO2 and adsorbent activated carbons were selected. TiO2 was formed by the crystal structures of anatase and rutile, while the activated carbons were plant- and coal-type materials. Each penetrant was mixed with each particulate matter reductant. The mixtures were sprayed on the concrete surface using concentration ratios of 8:2 and 9:1. A scanning electron microscopy with energy dispersive X-ray equipment was employed to measure the penetration depth of each specimen. The optimum concentration ratio was selected based on the penetration depth. RESULTS: TiO2 and activated carbon were penetrated within 1 mm from the concrete surface. This TiO2 distribution was acceptable because TiO2 and activated carbon locate to where they can directly come in contact with sunlight and air pollutant, respectively. Infiltration to the concrete surface was easily achieved because the concrete voids were bigger than the nanosized TiO2 and microsized activated carbon. The amount of penetration for each particulate matter reductant was measured from the concrete surface to a certain depth. CONCLUSIONS : The mass ratio on the surface can be predicted from the mass ratio of the particulate matter reductant measurement distributed through the penetration depth. The optimum mass ratio was also presented. Moreover, the mixtures of TiO2 with silane siloxane and activated carbon with silicate were recommended with an 8:2 concentration ratio.

PURPOSES: The objective of this study is to evaluate the durable performance of combined organic and inorganic hybrid mortar as repair material (HRM mortar) for concrete road facilities via comparison with that of cement repair materials (IRM mortar). METHODS : To produce HRM mortars, inorganic materials as binder and 2 mineral fillers were adopted. The ratio of main resin versus hardener was fixed at 1:2. For comparison, IRM mortars made with cement repair materials were also manufactured. Compressive, flexural, and bonding strengths were measured at predetermined periods. For durability assessment, the scaling resistance, freezing & thawing resistance, rapid chloride penetration resistance, and acid attack resistance of those mortars were experimentally monitored. RESULTS: The durability performances of HRM mortars, especially with respect to freezing & thawing, rapid chloride penetration and acid attack, were identified to be much better than those of IRM mortars. This result implies that HRM is a highly promising and versatile material because of its excellent durability. CONCLUSIONS: It is concluded that the application of the combined organic and inorganic hybrid mortars is possibly an option for the repair of concrete road facilities exposed to aggressive environments.

일반적으로 지중구조물은 지상구조물보다 지진하중 작용 시 상대적으로 작은 영향을 받는다. 그러나 많은 연구자들은 심각한 지중구조물 손상에 대해 보고하고 있으며 동적 흙-구조물 상호작용에 대한 지속적인 연구를 수행하고 있다. 본 연구에서는 유한요소해석 프로그램을 활용한 흙-구조물 상호작용을 지중구조물에 적용하고 지중구조물 하중저감기법인 ETI의 지오폼을 해석변수로 경감효과 및 최적 지오폼을 제안하고자 한다. 해석연구에 고려된 지오폼은 EPS 12, EPS 15, EPS 19이다. 해석 결과로부터 지진하중시 최대 50%까지 지중하중이 경감되었으며, 수평처짐은 26%, 수직처짐은 8%이 경감되었다. 본 해석연구를 토대로 ETI 공법을 적용한 지중구조물이 정적 및 지진하중 하에서도 하중의 영향을 경감시키는 것을 확인할 수 있었다.

콘크리트 구조물 표면에 발생하는 균열은 사용자에게 심리적인 불안감을 제공하며, 장기간 열려있는 큰 폭의 균열은 구조 물의 사용성능 및 내구성에 영향을 준다. 국내에서는 건축물을 포함한 시설물의 노후화에 따른 안전관리를 위해 균열정도를 파악하는 조사가 인력에 의한 육안조사로 수행되고 있지만 인력의 고비용성과 객관성 미흡 등의 문제점이 대두되고 있다. 이를 해결하기 위해 영상분석을 통한 균열 추출 등 다양한 연구가 수행되고 있으나 균열인식 정확도 향상에 2차원 영상 분석만으로는 한계가 있다. 따라서, 본 연구에서는 기존 2차원 영상 분석의 한계를 극복하기 위하여 3차원 특성을 정확하게 파악할 수 있는 3차원 광삼각 스캐닝기법을 활용하여 콘크리트 구조물 표면의 균열정보를 획득하는 기법을 개발하였다. 본 하 드웨어의 개발과 더불어 균열 패턴분석을 위한 획득된 균열의 세분화와 균열의 특성분석 알고리즘을 개발하였으며, 이를 실제 콘크리트 빔의 균열 탐지 적용을 통해 검증하였다.

The purpose of this study was to develop a carbon fiber sheet with embedded fiber optic sensor for maintenance and performance improvement of aged concrete bridges. The carbon fiber sheet reinforcement method can separate the concrete and the carbon fiber sheet, so it is necessary to investigate the bond performance level. However, separation of concrete and carbon fiber sheet and investigation of concrete scaling phenomenon are carried out by human, so it is difficult to secure objectivity and accurate investigation. Therefore, in this study, a method to confirm the bond level of carbon fiber sheet by reinforcing with a carbon fiber sheet with a fiber optic sensor was examined. In this study, we investigated the strain of fiber optic sensor embedded in carbon fiber sheet to identify the separate point of carbon fiber sheet. The strain measured by fiber optic sensor was measured by numerical analysis. The strain rate of the carbon fiber sheet was compared with that of the carbon fiber sheet. As a result, it was confirmed that the strain was changed at the point where the carbon fiber sheet was separated, and the strain occurred in the carbon fiber sheet was examined to predict the separate point.

In this study, natural period formular is presented for a RC shear wall structure with H-, T-, and L-shaped wall sections. The natural period formular proposed by Goel and Chopra and adopted in ASCE 7-10 was modified by using the ratio of the flange and web wall area. The natural periods of structures with H-shaped wall were numerically obtained, the results indicated that the ASCE 7-10 could not consider the natural period variation according to the length of the flange wall, but the proposed formula could do. Especially, ASCE 7-10 estimated much longer periods than eigenvalue analysis, and this implies that conservative seismic design is difficult. The periods by eigenvalue analysis exist between the upper and lower bounds given by the proposed formula, and conservative design is possible by using the proposed lower bound value. In order to verity the effectiveness of the proposed method, actual residential buildings with various types of flange walls are considered. Ambient vibration tests, eigenvalue analyses, and nonlinear dynamic analyses were conducted and the periods were compared with the values by ASCE 7-10 and the proposed formula. The results showed that the proposed formula could estimate more accurately the periods than ASCE 7-10.

본 연구에서는 콘크리트 석션식 지지구조물을 사용한 해상풍력발전시스템의 지진응답 해석을 수행하여 그 거동 특성을 파악한다. 전체 시스템을 RNA, 타워, 지지구조물로 구성된 구조계와 이에 접하고 있는 유체 및 지반의 부분구조로 분리하여 운동방정식을 유도한다. 구조계에 작용하는 유체의 동수압과 지반의 상호작용력을 산정하고, 이를 구조계의 운동방정식과 결합하여 전체 시스템의 지배방정식을 도출한 후, 이 방정식의 해를 구하여 해상풍력발전시스템의 지진응답을 계산한다. 해 석 결과로부터 지반-구조물 상호작용은 콘크리트 석션식 지지구조물에 의해 지지된 해상풍력발전시스템의 지진응답을 크게 증가시킬 수 있음을 확인할 수 있다. 특히, 지반의 유연성으로 인해 시스템의 고차 고유모드 응답이 증가할 수 있으므로, 해 상풍력발전시스템의 동적거동 산정 시에는 반드시 지반-구조물 상호작용의 효과를 고려하여야 할 것이다.